Enerpower Reention 48V Li-Ion Akkon 11.60Ah - 13,80Ah (550Wh - 665Wh)

ENERpower Akkon Li-Ion battery 48V | Format 13S4P | Energy 480Wh up to 665Wh | Capacity 11.60 Ah up to 13.80Ah | for pedelecs, eBikes DIY | with Samsung SDI

Important general information

This 48V battery in the Hailong Akkon housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm),
unloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 52 18650 battery cells.

With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 1000 watts of power that work in 48V (13S) systems.

The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switch

So you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).

Highlights

    High quality production - Made in Germany
    Manufacturing just-in-time
    BMS with an integrated passive balancer
    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)
    Direct from the manufacturer
    Rechargeable - Still 80% of its original capacity after 300 charge cycles
    No memory effect - charge the battery whenever you want
    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)

Technical specifications

    Li-ion cell: Samsung SDI  INR18650-29E / INR18650-35E
    Voltage (nominal): 48V
    Capacity: 11.6Ah, 13.8Ah
    Energy: 550Wh, 665Wh
    Configuration: 13S4P
    Internal resistance: <75 mOhm
    Charging voltage: 54.6V
    Final discharge voltage: 39V
    BMS continuous discharge current: 22A
    BMS 10 min. Discharge current: 25A
    BMS 5 seconds discharge current: 30A
    Safety Fuse: 30A
    Weight: approx.3.50 kg (without bracket)
    Charging: DC round plug 5.5 mm / 2.5 mm
    Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)


dimensions

    Length: 368 mm
    Width: 90 mm
    Height: 96 mm