HaiLong Bike-Frame Battery Side-Realese Li-Ion 36V 11.2Ah Pedelec eBike

Important general information

The 36V batteries in Hailong I case, which we assemble, are so-called “Frame Batteries”, which can be fixed to the bike’s frame. The batteries are assembled with plastic cell-holders. Charging is enabled using a DC round plug (5.5 mm / 2.1 mm) and discharging is done with a discharge cable with an XT90 plug.

The Hailong I is the most compact case of its kind with space for 40 18650 Li-ion cells, and suitable especially for users, which are looking to save space on the bikes. The battery is placed in a case which can be easily mounted on the frame of the bike.

The BMS (Battery Management System) can somewhat withstand a constant current (22A). Hence this battery is suitable also for motors with up tp 750W.

So you can choose not only the connector itself, but also the right charger. The difference between the chargers is due to the different output currents (charging speed).

Highlights

• High-quality manufacturing – made in Germany
• Assembly just-in-time
• BMS with an integrated passive balancer
• BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
• directly from the manufacturer
• Rechargeable – After 300 charging cycles maintains 80% of the original capacity
• No memory effect – charge the battery whenever you want
• Weight: About 2.25 kg.
• Environmentally friendly according to EU Directive 2002/95/EC (RoHS)

Technical data

• Li-ion cell: BAK
• Voltage (nominal): 36V (37V)
• Capacity: 11.20Ah
• Power: About 405Wh
• Configuration: 10S4P
• Internal resistance: < 75 mOhm
• Charge Voltage: 42V
• End-of-Discharge Voltage: 30V
• Maximum charging: 5A
• Continuous Discharge Current: 20A = 720 watts
• 10 Min. Discharge current: 25A = 900 Watts
• 5 Seconds Discharge Current: 35A = 1260 Watts

Dimensions

• Length: About 365 mm
• Width: 92 mm
• Height: 106 mm

Scope of Delivery

• Akku 36V 8,8Ah
• Halterung
• 2 Schlüssel