Motor Kit 250W + Battery 36V Hailong Pro + Charger

Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2 250W With Coaster Brake + Display + Battery ENERpower Hailong Pro 36V in 5 different versions from 11Ah (400Wh) and up to 17,25Ah (625Wh)  + Charger 2A / 3A / 4A

General Information

This kit includes a Tongsheng TSDZ2 36V motor kit with 250W output power along with a ENERpower Hailong battery pack and one of three different Modiary output 2A, 3A and 4A chargers.

Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does have a back pedal function (Coaster Brake).

The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.

Technical Details

Motor

• Manufacturer:Tongsheng (China)
• Model: TSDZ2
• Motor tyep: mid-motor
• Wheel diameter: 16' - 28'
• Energy: 250W - 350W
• Voltage: 36V / 48V
• Torque: 50N.m - 80N.m
• Level of support: 36% ~ 300%
• Maximal speed: 25Km/h
• Weight: 3.3 Kg.
• Coaster Brake: Yes

Display

• Type: VLCD5
• Bus communication: U-ART or CAN
• Time display: single-way / total
• Distance display: single-way / total
• Power assist: adjustable, 5 levels
• Background light: 3 levels brightness
• Fault diagnosis function: intelligently identifies and shows the problem
• Measuring units: selectable, metric / anglo-american

Battery - Highlights

• High quality assembling – Made in Germany
• Assembling Just-In-Time
• BMS with an integrated balancer
• BMS with protection against overcharge, deep discharge, over discharge (temperature control)
• Powered by Samsung INR18650-35E li-ion battery cells
• Direct from the manufacturer
• Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
• No memory-effect – charge the battery whenever you want
• Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)

Battery - Technical Details

• Manufacturer: ENERpower (Germany)
• Case: Hailong Pro
• Type: Bike-frame battery
• Li-ion Cell: Murata, LG Chem, or Samsung SDI
• Voltage (nominal): 36V (37V)
• Capacity: 11Ah up to 17.25Ah
• Energy: 400Wh and up to 625Wh
• Configuration: 10S5P
• Internal resistance: < 75 mOhm
• Charge Voltage: 42V
• End-of-Discharge Voltage: 30V
• BMS Continuous Discharge Current: 22A
• BMS 10 Min. Discharge Current: 25A
• BMS 5 Seconds Discharge Current: 30A
• Safety Fuse: 30A
• Weight: approx. 2.75 kg.
• Length: ca. 370 mm
• Width: 90 mm
• High: 85-90 mm
• Charge: DC round plug 5.5 mm/2.5 mm
• Discharge: Cable with fuse 30A with XT60 power connector (counterpart is included in the scope of delivery)

Charger

In this set we offer 3 different chargers to choose from:

• Manufacturer: Modiary
• Input: 100 – 240V AC
• Output voltage: 42V
• CC/CV with end-of-charge voltage of 42V + 0.2V
• GS - tested safety according to § 21 ProdSG (corresponds with regard to the protection of the safety and health of persons)
• Efficiency: approx. 85%

How to choose the right battery cell?

https://enerprof.de/en/ebike-batteries/bike-frame-batteries/?p=1&o=1&n=20&f=145