Softpack Battery 36V 17.1Ah BMS 30A XLR-3 with 29E

320,00 € *

non comprise comprise hors frais d'expédition

Délai de livraison env. 5-7 jours

  • 361060201
ENERpower Softpack battery 36V in format 10S6P square | 615 Wh | capacity 17.1 Ah | for... plus
Informations produit "Softpack Battery 36V 17.1Ah BMS 30A XLR-3 with 29E"

ENERpower Softpack battery 36V in format 10S6P square | 615 Wh | capacity 17.1 Ah | for Pedelecs, eBikes DIY | with Samsung 29E.

Important General Information

The 36V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.

In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (construction 8×4), 10S4P (construction 8×5), 10S5P (construction 8×7) and 10S6P (construction 8×8).

In the rectangular version, 10 cells are used on the longest side (200 mm). We assemble this type of battery in the formats 10S2P (construction 10×2), 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6).

The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.

We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.

In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery

Compatible with 36V motors

250 watts / 500 watts / 750 watts / 950 Watt / 1080 Watt

Highlights

  • High-quality production - Made in Germany
  • Production Just-In-Time
  • BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
  • With battery cells INR18650-29E from Samsung SDI
  • Direct from the manufacturer
  • Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
  • No memory effect - charge the battery whenever you want
  • Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)

Technical Specifications

  • Li-ion Cell: Samsung INR18650-29E
  • Voltage (nominal): 36V (37V)
  • Capacity: 17.1 Ah
  • Power: approx. 615 Wh
  • Configuration: 10S6P (set up: 8x8)
  • Internal resistance: < 75 mOhm
  • Charge voltage: 42V
  • End-of-discharge voltage: 30V
  • Charge Max.: 8A
  • Continuous discharge Current: 30A = 1080 watts
  • 5 seconds discharge current: 35A = 1260 watts
  • Weight: approx. 3.25 Kg.
  • Charge connector (connects to the charger): XLR-3 (3 pins)
  • Discharge connector (connects to the motor): XT-90

Dimensions

  • Length: 160 mm
  • Width: 160 mm – 170 mm
  • Height: 70 mm
tension de la batterie: 36V
Chimie des batteries: Li-Ion
Capacité de la batterie : 15.1Ah - 20Ah
BMS: 30A
Configuration de la batterie: 10S6P
Version Soft Pack: Carré
Liens supplémentaires vers "Softpack Battery 36V 17.1Ah BMS 30A XLR-3 with 29E"
Lire, écrire des évaluations et en discuter ... plus
Évaluations des clients pour "Softpack Battery 36V 17.1Ah BMS 30A XLR-3 with 29E"
Écrire une évaluation
Les évaluations sont publiées après vérification.

Les champs marqués d'un astérisque (*) sont obligatoires.

J'ai lu la politique de confidentialité.

Modiary Charger 42V 2A Modiary Charger 42V 2A
à partir de 29,99 € *
Recommandé!
Modiary Charger 42V 3A Modiary Charger 42V 3A
à partir de 31,99 € * 35,99 € *
Modiary Charger 42V 2A for Winora Modiary Charger 42V 2A for Winora
à partir de 27,99 € *
Recommandé!
Recommandé!
Récemment consulté