HaiLong PLUS Frame Battery Li-Ion 48V 11Ah V3 DIY Conversion Kit

• For motors up to 950 Watt

Important General Information

This 48V battery in the Hailong PLUS case, which we manufacture, can be mounted on the frame or on the luggage carrier of the bike. The batteries are manufactured in cell holders made of plastic. Charging is made possible with a DC circular connector (5.5 mm / 2.5 mm), discharging via the bracket (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This case can hold up to 65 18650 battery cells.
 
With a BMS that can withstand 20A-22A continuous load, this battery is suitable for motors with up to 1000 watts of power, working in 48V (13S) systems.

The battery holder is identical to the Hailong Pro holder (52-cell case). So you can use the holder for the 2 different cases.

So you can choose not only the connector itself, but also the right charger. The difference in the chargers is due to the different output currents (charging speed).

Highlights

Technical data

• Li-Ion cell: Murata US18650V3
• Voltage (nominal): 48V
• Capacity: 11Ah
• Power: 525Wh
• Configuration: 13S5P
• Internal resistance: < 75 mOhm
• Charging voltage: 54.6V
• End-of-Discharge Voltage: 39V
• BMS Continuous Discharge Current: 22A
• BMS 10 Min. Discharge Current: 25A
• BMS 5 Seconds Discharge Current: 30A
• Safety Fuse: 30A
• Weight: approx. 3.65 kg.
• Charge: DC round plug 5.5 mm/2.5 mm
• Discharge: Cable with 30Afuse with XT90 power connector