Softpack Battery 43.2V 10Ah BMS 20A XLR-3 - rectangular (430Wh)

ENERpower Softpack battery 43.2V in format 12S2P | 430 Wh | capacity 10 Ah | for Pedelecs, eBikes DIY | with Samsung SDI.

Important General Information

The 43.2V 12S batteries in softpack, which we manufacture in Berlin are built in rectangular structure. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90, XT60, or Anderson PowerPole connector (male). A fuse of 30A in a water-resistant holder limits the current drain.

In the rectangular version, 12 cells are used on the longest side (265 mm). We assemble this type of battery in the formats 12S2P (construction 12×2), 12S3P (12×3), 12S4P (12×4), 12S5P (12×5)  etc.

The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.

We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.

In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery