Softpack Battery 48V 13.8Ah BMS 30A XLR-3 with 35E - rectangular

405,00 € *

non comprise comprise hors frais d'expédition

Délai de livraison env. 5-7 jours

Connecteur (décharge):

Choisissez un connecteur

Avec chargeur 54.6V (pour batteries 48V / 52V):

Choisissez un chargeur

  • 4813050130
ENERpower Softpack battery 48V in format 13S3P | 500 Wh | capacity 10,35 Ah | for Pedelecs,... plus
Informations produit "Softpack Battery 48V 13.8Ah BMS 30A XLR-3 with 35E - rectangular"

ENERpower Softpack battery 48V in format 13S3P | 500 Wh | capacity 10,35 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR18650-35E.

Important General Information

The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.

In the square version, 10 cells are used on the longest side (200 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc.

In the rectangular version, 13 cells are used on the longest side (260 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc.

The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.

We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.

In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery

Compatible with 48V motors

250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt

Highlights

  • High-quality production - Made in Germany
  • Production Just-In-Time
  • BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
  • With battery cells Samsung SDI INR18650-35E
  • Direct from the manufacturer
  • Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
  • No memory effect - charge the battery whenever you want
  • Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)

Technical Specifications

  • Li-ion Cell: Samsung INR18650-35E
  • Voltage (nominal): 48V (46.8V - 48.1V)
  • Capacity: 13.8 Ah
  • Power: approx. 660 Wh
  • Configuration: 13S4P (set up: 13×3)
  • Internal resistance: < 75 mOhm
  • Charge voltage: 54.6V
  • End-of-discharge voltage: 39V
  • Continuous discharge Current: 30A = 1440 watts
  • 5 seconds discharge current: 40A = 1920 watts
  • Weight: 2.85 Kg.
  • Charge connector (connects to the charger): XLR-3 (3 pins)
  • Discharge connector (connects to the motor): XT-90

Dimensions

  • Length: 260 mm
  • Width: 80 mm – 90 mm
  • Height: 65 mm
tension de la batterie: 48V
Chimie des batteries: Li-Ion
puissance du moteur: Jusqu'à 1440 watts
Piles: INR18650-35E
Capacité de la batterie : 15Ah - 20Ah
BMS: 30A
Configuration de la batterie: 13S5P
Version Soft Pack: rectangulaire
Liens supplémentaires vers "Softpack Battery 48V 13.8Ah BMS 30A XLR-3 with 35E - rectangular"
Lire, écrire des évaluations et en discuter ... plus
Évaluations des clients pour "Softpack Battery 48V 13.8Ah BMS 30A XLR-3 with 35E - rectangular"
Écrire une évaluation
Les évaluations sont publiées après vérification.

Les champs marqués d'un astérisque (*) sont obligatoires.

J'ai lu la politique de confidentialité.

Modiary Charger 54.6V 3A Modiary Charger 54.6V 3A
à partir de 32,99 € *
Modiary Charger 54.6V 2A Modiary Charger 54.6V 2A
à partir de 35,99 € *
Recommandé!
Recommandé!
Recommandé!
Récemment consulté