460Wh: Motor Kit 36V 250W + Battery 36V Hailong I 12.80 Ah (side realese)

Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2B 250W + Battery ENERpower Hailong I 36V 12.8Ah with side realese

General Information

This kit includes a Tongsheng TSDZ2B 36V motor kit with 250W output power along with a ENERpower Hailong battery pack.

Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.

The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.

Technical Details

Motor

• Manufacturer:Tongsheng (China)
• Model: TSDZ2B
• Motor tyep: mid-motor
• Wheel diameter: 16' - 28'
• Energy: 250W - 350W
• Voltage: 36V / 48V
• Torque: 50N.m - 80N.m
• Level of support: 36% ~ 300%
• Maximal speed: 25Km/h
• Weight: 3.3 Kg.

Display + Charger

You can choose a suitable display and charger from our bundle offers

Battery - Highlights

• High quality assembling – Made in Germany
• Assembling Just-In-Time
• BMS with an integrated balancer
• BMS with protection against overcharge, deep discharge, over discharge (temperature control)
• Direct from the manufacturer
• Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
• No memory-effect – charge the battery whenever you want
• Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)

Battery - Technical Details

• Manufacturer: ENERpower (Germany)
• Case: Hailong I
• Type: Bike-frame battery
• Voltage (nominal): 36V (37V)
• Capacity: 12.80Ah
• Energy: approx. 460Wh
• Configuration: 10S4P
• Internal resistance: < 75 mOhm
• Charging voltage: 42V
• End-of-discharge voltage: 30V
• Maximal charging: 5A
• Continuous discharge current: 20A = 720 Watt
• 10 Min. discharge current: 25A = 900 Watt
• 5 Sec. discharge current: 35A = 1260 Watt
• Constant load per cell: approx. 3.7A or 7A in peak load.
• Weight: approx. 2.25 Kg

Charger

• Manufacturer: Atnen
• Input: 100 – 240V AC
• Output voltage: 42V
• CC/CV with end-of-charge voltage of 42V + 0.2V
• GS - tested safety according to § 21 ProdSG (corresponds with regard to the protection of the safety and health of persons)
• Efficiency: approx. 85%

Display:

VLCD5, VLCD6, XH-18, SW102

Display and Charger must be added from the bundle offers and must be paid in addition