Motor Kit 250W (oaster Brake) + Battery 36V Gezer

Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2 250W + Battery ENERpower Hailong Gezer DP-6C 36V in 2 different Versions

General Information

This kit includes a Tongsheng TSWZ2 36V motor kit with 250W output power along with a ENERpower Hailong battery pack and one of three different Modiary output 2A, 3A and 4A chargers.

Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.

The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.

This new Edition 2020 is a motor kit with a coaster brake function

The suitable Charger and the suitable Display can be chosen with a complete discount from our Bundle offers

Technical Details

Motor

• Manufacturer:Tongsheng (China)
• Model: TSDZ2
• Motor tyep: mid-motor
• Wheel diameter: 16' - 28'
• Energy: 250W - 350W
• Voltage: 36V / 48V
• Torque: 50N.m - 80N.m
• Level of support: 36% ~ 300%
• Maximal speed: 25Km/h
• Weight: 3.3 Kg.

Display

• Type: VLCD5
• Bus communication: U-ART or CAN
• Time display: single-way / total
• Distance display: single-way / total
• Power assist: adjustable, 5 levels
• Background light: 3 levels brightness
• Fault diagnosis function: intelligently identifies and shows the problem
• Measuring units: selectable, metric / anglo-american

Battery - Highlights

• High quality assembling – Made in Germany
• Assembling Just-In-Time
• BMS with an integrated balancer
• BMS with protection against overcharge, deep discharge, over discharge (temperature control)
• Direct from the manufacturer
• Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
• No memory-effect – charge the battery whenever you want
• Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)

Battery - Technical Details

• Manufacturer: ENERpower (Germany)
• Case: Hailong Gezer DP-6C
• Type: Bike-frame battery
• Li-Ion-cell: Samsung SDI, LG Chem, or Murata
• Voltage (nominal): 36V (37V)
• Capacity: 13.2Ah and up to 20,7Ah
• Power: from 475 and up to 745Wh
• Configuration: 10S6P
• Internal resistance: < 75 mOhm
• Charge Voltage: 42V
• End-of-discharge Voltage: 30V
• BMS continueous discharge current: 22A
• BMS 10 Min. discharge current: 25A
• BMS 5 Sec. discharge current: 30A
• Safety fuse: 30A
• Weight: approx. 3.35 Kg.
• Charging: DC round plug 5.5 mm / 2.5 mm
• Discharging: Cable with fuse 30A with XT60 high current connector (counterpart is included)

Charger

In this set we offer 3 different chargers to choose from:

• Manufacturer: Modiary
• Input: 100 – 240V AC
• Output voltage: 42V
• CC/CV with end-of-charge voltage of 42V + 0.2V
• GS - tested safety according to § 21 ProdSG (corresponds with regard to the protection of the safety and health of persons)
• Efficiency: approx. 85%