Motor Kit 36V 250W + Bottle battery Ekron 14Ah (505Wh)

Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2B 250W with and without coaster break + Battery ENERpower Ekron 14Ah

The suitable Display and Charger you can configurate from our Bundle-offers and are add-on products (must be paid in addition)

You can choose between Motor with and without coaster break

General Information

This kit includes a Tongsheng 36V motor kit with 250W output power along with a ENERpower Hailong battery pack and one of three different Modiary output 2A, 3A and 4A chargers.

Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and a Tool. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support.

The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.

Technical Details

Motor

• Manufacturer:Tongsheng (China)
• Model: TSDZ2B
• Motor tyep: mid-motor
• Wheel diameter: 16' - 28'
• Energy: 250W - 350W
• Voltage: 36V
• Torque: 50N.m - 80N.m
• Level of support: 36% ~ 300%
• Maximal speed: 25Km/h
• Weight: 3.3 Kg.

Display

You have 5 different Displays to choose from

Battery - Highlights

• High quality assembling – Made in Germany
• Assembling Just-In-Time
• BMS with an integrated balancer
• BMS with protection against overcharge, deep discharge, over discharge (temperature control)
• Direct from the manufacturer
• Rechargeable – even after 500 charging cycles 80% of the original capacity is still available.
• No memory-effect – charge the battery whenever you want
• Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)

Battery - Technical Details

• Manufacturer: ENERpower (Germany)
• Case: Bottle Carrier EKRON
• Type: Bike-frame battery
• Li-ion Cell: Panasonic NCR18650GA
• Voltage (nominal): 36V (37V)
• Capacity: 14Ah
• Energy: 505Wh
• Configuration: 10S4P
• Internal resistance: < 75 mOhm
• Charge Voltage: 42V
• End-of-Discharge Voltage: 30V
• BMS Continuous Discharge Current: 15A
• BMS 10 Min. Discharge Current: 18A
• Safety Fuse: 30A
• Weight: approx. 2.65 kg.
• Length: ca. 355 mm
• Width: 90 mm
• High: 109 mm
• Charge: DC round plug 5.5 mm/2.5 mm
• Discharge: Cable with fuse 30A with XT90 power connector (counterpart is included in the scope of delivery)

Charger

In this set we offer 4 different chargers to choose from with 2A, 3A and 4A output

Another charger is a life-cycle Charger (41.3V 3A)