- Electromobility
- Energy Storage
- PV technology
- Chargers
- Rechargeable Batteries
-
Battery Packs & Parts
-
Li-Ion Battery Packs
- Batteries 1S (3.6V-3.7V)
- Batteries 2S (7.2V-7.4V)
- 3S Batteries (10.8V-11.1V)
- Batteries 4S (14.4V-14.8V)
- Li-Ion Battery 5S (18V - 18.5V)
- Li-Ion Akkus 6S (21,6V-22,2V)
- Batteries for electrical devices
- eBoat Batteries
- Industry
- Ni-Mh Batteries
- starter battery 12V LiFePo4
- LiFePO4 Battery Packs
- Li-ion Batteries for LED-Flashlights
- LiFePo4 Battery Packs
- Battery Pack Accessories
- DIY Batteries (no BMS)
-
Li-Ion Battery Packs
Filter
–
BUNDLE
Softpack Battery 24V 10Ah BMS 20A XLR-3 with 50M
€170.00*
Prod. no.:
247210
ENERpower soft-pack battery 24V in format 7S2P | Capacity 10Ah | for Pedelecs, eBikes DIY | with LG Chem INR21700 50M.
Important General Information
The 24V batteries (25.2V - 25.9V) in softpack are manufactured in Berlin, and assembled in cell holders made of plastic. Charging is daone with a 3-pin charging plug (XLR-3), discharging via a discharge cable with XT-90 connector (male). A fuse of 30A in a waterproof holder limits the current drain.The BMS (Battery Management System) is always mounted on the longest side of the battery. At this point, the battery is about 10 to 15 mm thicker.The softpack batteries are assembled with FR4 insulation, which is made of flame retardant composite materials and consists of epoxy resin and glass fiber fabric. FR-4 is used i.a. as an electrically non-conductive substrate in electrical circuit boards.Highlights
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion cell: LG Chem INR21700 M50
Voltage (nominal): 24V (25.2V - 25.9V)
Capacity: 10Ah
Power: approx. 240 Wh
Configuration: 7S2P
Construction: 5 x 3
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-o-fdischarge voltage: 21V
Continuous discharge current: 20A = 480 watts
10 min. discharge current: 25A = 600 watts
5 seconds discharge current: 35A = approx. 850 watts
Weight: Approx. 1.2 kg.
Dimensions
Length: 125 mm Länge
Width: 75 mm
Height: 80 mm
BUNDLE
Softpack Battery 24V 20Ah BMS 20A XLR-3 with 50E 7 x 4
From
€265.88*
Prod. no.:
11354
ENERpower soft-pack battery 24V in format 7S4P | Capacity 20Ah | for Pedelecs, eBikes DIY | with INR21700 50E.
Important General Information
The 24V batteries (25.2V - 25.9V) in softpack are manufactured in Berlin, and assembled in cell holders made of plastic. Charging is daone with a 3-pin charging plug (XLR-3), discharging via a discharge cable with XT-90 connector (male). A fuse of 30A in a waterproof holder limits the current drain.The BMS (Battery Management System) is always mounted on the longest side of the battery. At this point, the battery is about 10 to 15 mm thicker.The softpack batteries are assembled with FR4 insulation, which is made of flame retardant composite materials and consists of epoxy resin and glass fiber fabric. FR-4 is used i.a. as an electrically non-conductive substrate in electrical circuit boards.Highlights
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion cell: LG Chem INR21700 M50
Voltage (nominal): 24V (25.2V - 25.9V)
Capacity: 20Ah
Power: approx. 480 Wh
Configuration: 7S7P
Construction: 7 x 4
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-o-fdischarge voltage: 21V
Continuous discharge current: 20A = 480 watts
10 min. discharge current: 25A = 600 watts
5 seconds discharge current: 35A = approx. 850 watts
Weight: Approx. 2.4 kg.
Dimensions
Length: 165 mm Länge
Width: 100 mm - 115 mm (Side of BMS)
Height: 74 mm