ENERpower battery case 52V in format 14S6P | 1560Wh | capacity 30Ah | for Pedelecs, eBikes, Maschines DIY | with LG Chem, Or Samsung SDI.
General Information
Manufactured in a plastic case (285x120x390 mm) we offer several Energy Storage Systems with high energy density
The batterie is assembled with the Li-Ion battery cells fromPanasonic and controlled by a 60A Smart BMS (Battery Management System).
This battery is suitable for 52V electric motors with a total output of up to 1560 watts, or 3120 Watts
A charge level indicator shows at any time in percent how full (or empty) the battery is.
In this battery system we have a Weipu Bayonet IP67 connector for charging (up to 20A) and an Anderson high-current connector for discharging with an on/off switch you can easily connect the power supply without disconnecting the battery from the consumer.On / off switchThe batteries can be easily switched on and off using a switchBMS (Battery Management System)This series of batteries is manufactured with a Smart BMS with 30A continuous load (for 24V motors up to 720 watts). A Smart BMS is digitally programmed and controlled in comparison to an analog BMS. Monitoring of voltage (overcharge and deep discharge), current (overdischarge) and temperature are more accurate. The passive balancer is also easier to control.scope of applicationWe have developed this series of batteries for light electric vehicles such as electric rickshaw, electric cargo bikes, electric boats, machines in the industrial sector etc.Compatible with 48V motors, or applicationsWeipu: up to 30A = 1560 Watts
Amphenol: up to 60A = 3120 WattsHighlights High quality production - Made in Germany Manufacturing just-in-time Smart BMS with an integrated passive balancer Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 500 charging cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: 21700 (LG Chem, or Samsung SDI) Voltage (nominal): 52V (50.4V - 51.8V) Capacity: 30Ah Energy: approx. 1560 Wh Configuration: 14S6P Charging voltage: 58.8V Final discharge voltage: 42V Charging current (max.): 20A Continuous discharge current (Max): 60A = 3120 Watts Weight: approx. 10 Kg. Dimensions: 285 x 120 x 390 mm Discharge: Weipu SP21: 30A (1560 Watt), or Amphenol ELR2A (60A) up to 3120 Watt Discharge connector: Weipu to Open-End
For more Information: Link
ENERpower Battery LiFePO4 12V (12.8V) 100Ah (1280Wh) – replaces lead-acid batteries 12V, lead-gel batteries 12V
Important General Information
Our selection of LiFePo4 batteries is ideal as a lightweight and long-lasting replacement for lead batteries (lead acid).
With a much lighter weight, rugged tension and long lifespan (approx. 2000 charge cycles), this lithium technology brings important advantages over conventional lead battery technology.
When you buy a battery from ENERpower, you buy a product from a specialist with its own production line.
Highlights
High-quality production – partial production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
100Ah at LiFePo4 is equivalent to approx. 180Ah-200Ah at lead gel batteries
directly from the manufacturer
Rechargeable – After 1800 complete charging cycles still preserves 80% of its original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
UL and IEC 62133
Technical Data
LiFePo4 Cell : HAIDI
Voltage (nominal): 12.8V (12V)
Capacity: 100Ah
Configuration: 4S40P
Energy: approx. 1280Watt/h
charge current: 50A (0.5C) / 100A (1C) Max. not for cycle-Life
Internal resistance: < 30 mOhm
Charging voltage: 14.4V
End-of-discharge voltage: 10V
Continuous discharge current: < 70A
Weight: approx. 13600g
Dimensions (W x L x H): 330 x 173 x 212 mm
Applications
UPS, solar systems, motors up to 1280 watts, model making, campers, lighting systems etc.
ENERpower Battery LiFePO4 12V (12.8V) 46.80Ah (560Wh) – replaces lead-acid batteries 12V, lead-gel batteries 12V
Important General Information
Our selection of LiFePo4 batteries is ideal as a lightweight and long-lasting replacement for lead batteries (lead acid).
With a much lighter weight, rugged tension and long lifespan (approx. 2000 charge cycles), this lithium technology brings important advantages over conventional lead battery technology.
When you buy a battery from ENERpower, you buy a product from a specialist with its own production line.
Highlights
High-quality production – partial production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
46.80Ah at LiFePo4 is equivalent to approx. 90Ah-100Ah at lead gel batteries
directly from the manufacturer
Rechargeable – After 1800 complete charging cycles still preserves 80% of its original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical Data (Download data sheet)
LiFePo4 Cell : Goldencell
Voltage (nominal): 12.8V (12V)
Capacity: 46.80Ah
Configuration: 4S13P-26650
Energy: approx. 560 Watt/h
charge current: 23A (0.5C)
Internal resistance: < 50 mOhm
Charging voltage: 14.4V
End-of-discharge voltage: 10V
Continuous discharge current: < 40A
Weight: approx. 5100g
Dimensions (W x L x H): 195 x 165 x 175 mm
Applications
UPS, solar systems, motors up to 250 watts, model making, campers, lighting systems etc.
ENERpower Battery LiFePO4 12V (12.8V) 50Ah (640Wh) – replaces lead-acid batteries 12V, lead-gel batteries 12V
Important General Information
Our selection of LiFePo4 batteries is ideal as a lightweight and long-lasting replacement for lead batteries (lead acid).
With a much lighter weight, rugged tension and long lifespan (approx. 2000 charge cycles), this lithium technology brings important advantages over conventional lead battery technology.
When you buy a battery from ENERpower, you buy a product from a specialist with its own production line.
Highlights
High-quality production – partial production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
50Ah at LiFePo4 is equivalent to approx. 90Ah-100Ah at lead gel batteries
directly from the manufacturer
Rechargeable – After 1800 complete charging cycles still preserves 80% of its original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
UL and IEC 62133
Technical Data
LiFePo4 Cell : HAIDI
Voltage (nominal): 12.8V (12V)
Capacity: 50Ah
Configuration: 4S20P
Energy: approx. 640Watt/h
charge current: 25A (0.5C) / 50A (1C) Max. not for cycle-Life
Internal resistance: < 30 mOhm
Charging voltage: 14.4V
End-of-discharge voltage: 10V
Continuous discharge current: < 70A
Weight: approx. 8200g
Dimensions (W x L x H): 229 x 138 x 214 mm
Applications
UPS, solar systems, motors up to 850 watts, model making, campers, lighting systems etc.
ENERpower Battery LiFePO4 12V (12.8V) 64.80Ah (820Wh) – replaces lead-acid batteries 12V, lead-gel batteries 12V
Important General Information
Our selection of LiFePo4 batteries is ideal as a lightweight and long-lasting replacement for lead batteries (lead acid).
With a much lighter weight, rugged tension and long lifespan (approx. 2000 charge cycles), this lithium technology brings important advantages over conventional lead battery technology.
When you buy a battery from ENERpower, you buy a product from a specialist with its own production line.
Highlights
High-quality production – partial production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
64.8Ah at LiFePo4 is equivalent to approx. 120Ah-130Ah at lead gel batteries
directly from the manufacturer
Rechargeable – After 1800 complete charging cycles still preserves 80% of its original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical Data (Download data sheet)
LiFePo4 Cell : Goldencell
Voltage (nominal): 12.8V (12V)
Capacity: 64.8Ah
Configuration: 4S18P-26650
Energy: approx. 820Watt/h
charge current: 20A (0.4C)
Internal resistance: < 40 mOhm
Charging voltage: 14.4V
End-of-discharge voltage: 10V
Continuous discharge current: < 50A (approx. 640 Watt)
Weight: approx. 6100g
Dimensions (W x L x H): 260 x 130 x 200 mm
Applications
UPS, solar systems, motors up to 640 watts, model making, campers, lighting systems etc.
ENERpower Battery LiFePO4 12V (12.8V) 75.60Ah (960Wh) – replaces lead-acid batteries 12V, lead-gel batteries 12V
Important General Information
Our selection of LiFePo4 batteries is ideal as a lightweight and long-lasting replacement for lead batteries (lead acid).
With a much lighter weight, rugged tension and long lifespan (approx. 2000 charge cycles), this lithium technology brings important advantages over conventional lead battery technology.
When you buy a battery from ENERpower, you buy a product from a specialist with its own production line.
Highlights
High-quality production – partial production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
75.60Ah at LiFePo4 is equivalent to approx. 150Ah-160Ah at lead gel batteries
directly from the manufacturer
Rechargeable – After 1800 complete charging cycles still preserves 80% of its original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical Data (Download data sheet)
LiFePo4 Cell : Goldencell
Voltage (nominal): 12.8V (12V)
Capacity: 75.60Ah
Configuration: 4S21P
Energy: approx. 960 Watt/h
Maximal charge current: 35A (0.5C)
Internal resistance: < 50 mOhm
Charging voltage: 14.4V
End-of-discharge voltage: 10V
Continuous discharge current: < 65A (approx. 830 Watt)
Weight: approx. 8000g
Contacts: Flat Plug Faston
Dimensions (W x L x H): 265 x 170 x 215 mm
Applications
UPS, solar systems, motors up to 830 watts, model making, campers, lighting systems etc.