ENERpower soft pack battery 36V | Format 10S4P | Energy 720 Wh | Capacity 20 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50TImportant general informationThis 36V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. The charging of the battery is done with an IP67 3-PIN Zenith connector (an adapter of XLR-3 on Zenith will be added)Discharging of the battery takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 40 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 500 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR21700-50E Voltage (nominal): 36V Capacity: 20Ah Energy: 720Wh Configuration: 10S4P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Safety Fuse: 30A Weight: approx.3.50 kg (without bracket) Charging: Zenith IP-67 3-Pins Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)
dimensions Length: 368 mm Width: 95 mm Height: 103 mm
ENERpower Frame battery LOD battery 36V | Format 10S4P | Energy 720 Wh | Capacity 20 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50TImportant general informationThis 36V battery in the Hailong Lod housing, which we assemble , can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. The charging of the battery is done with a DC Round Plug 5.5 x 2.1 mmDischarging of the battery takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 40 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, that is located in the front.So you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 500 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR21700-50E Voltage (nominal): 36V Capacity: 20Ah Energy: 720Wh Configuration: 10S4P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Safety Fuse: 30A Weight: approx.3.50 kg (without bracket) Charging: DC 5.5 x 2.1 mm Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)
dimensions Length: 320 mm Width: 88.5 mm Height: 117 mm
ENERpower HaiLong Frame Battery Li-Ion 36V 11.20Ah for Pedelecs & eBikes DIY Conversion Kit.
For motors from 250 Watts and up to 750 Watts
Important general information
The 36V batteries in Hailong I case, which we assemble, are so-called “Frame Batteries”, which can be fixed to the bike’s frame. The batteries are assembled with plastic cell-holders. Charging is enabled using a DC round plug (5.5 mm / 2.1 mm) and discharging is done with a discharge cable with an XT90 plug.
The Hailong I is the most compact case of its kind with space for 40 18650 Li-ion cells, and suitable especially for users, which are looking to save space on the bikes. The battery is placed in a case which can be easily mounted on the frame of the bike.
The BMS (Battery Management System) can somewhat withstand a constant current (22A). Hence this battery is suitable also for motors with up tp 750W.
So you can choose not only the connector itself, but also the right charger. The difference between the chargers is due to the different output currents (charging speed).
Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Weight: About 2.25 kg.
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical data
Li-ion cell: BAK
Voltage (nominal): 36V (37V)
Capacity: 11.20Ah
Power: About 405Wh
Configuration: 10S4P
Internal resistance: < 75 mOhm
Charge Voltage: 42V
End-of-Discharge Voltage: 30V
Maximum charging: 5A
Continuous Discharge Current: 20A = 720 watts
10 Min. Discharge current: 25A = 900 Watts
5 Seconds Discharge Current: 35A = 1260 Watts
Dimensions
Length: About 365 mm
Width: 92 mm
Height: 106 mm
Scope of Delivery
Akku 36V 8,8Ah
Halterung
2 Schlüssel
ENERpower HaiLong Masada Frame Battery Li-Ion 36V 15Ah for Pedelecs & eBikes DIY Conversion Kit.
For motors from 250 Watts and up to 750 Watts
Important general information
The 36V batteries in Hailong Masada case, which we assemble, are so-called “Frame Batteries”, which can be fixed to the bike’s frame. The batteries are assembled with plastic cell-holders. Charging is enabled using a DC round plug (5.5 mm / 2.1 mm) and discharging is done with a discharge cable with an XT90 plug.
The Hailong Masada is the most compact case of its kind with space for 50 18650, oder 30 21700 Li-ion cells and suitable especially for users, which are looking to save space on the bikes. The battery is placed in a case which can be easily mounted on the frame of the bike.
The BMS (Battery Management System) can somewhat withstand a constant current (22A). Hence this battery is suitable also for motors with up tp 750W.
This case has also an ON-Off-Switch and has special silicon insultion to protect it from water.
So you can choose not only the connector itself, but also the right charger. The difference between the chargers is due to the different output currents (charging speed).
Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Weight: About 2.85 kg.
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical data
Li-ion cell: LG Chem INR21700-M50T
Voltage (nominal): 36V (37V)
Capacity: 15Ah
Power: About 540Wh
Configuration: 10S3P
Internal resistance: < 75 mOhm
Charge Voltage: 42V
End-of-Discharge Voltage: 30V
Maximum charging: 5A
Continuous Discharge Current: 20A = 720 watts
10 Min. Discharge current: 25A = 900 Watts
5 Seconds Discharge Current: 35A = 1260 Watts
Dimensions
Length: About 425 mm
Width: 90 mm
Height: 105 mm
Scope of Delivery
Akku 36V 8,8Ah
Halterung
2 Schlüssel
ENERpower frame battery Li-Ion Hailong PLUS DIY 36V (37V) from our own assembly in Berlin with INR18650-MH1 For motors from 250 watts to 750 wattsImportant general informationThis 36V battery in the Hailong PLUS housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm), discharging takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. Up to 65 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.The battery holder is identical to the Hailong Pro holder (housing with space for 52 battery cells). So you can use the bracket for the 2 different housings.So you can not only choose the connector yourself, but also the right charger.The difference in the chargers lies in the different output currents (charging speed).
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR18650-MH1 Voltage (nominal): 36V (37V) Capacity: 19.20Ah Energy: 695Wh Configuration: 10S6P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.3.35 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: XT-60, XT-90, Anderson PowerPole
ENERpower frame battery Li-Ion Hailong Pro DIY 36V (37V) from our own assembly line in Berlin with LG Chem INR18650-MH1 For motors from 250 watts to 750 wattsImportant general informationThis 36V battery in the Hailong Pro housing, which we assemble in Berlin, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm), discharging takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (Discharge) connector. Up to 52 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.The battery holder is identical to the Hailong Plus holder (housing with space for 65 battery cells). So you can use the holder for the 2 different housings.So you can not only choose the connector yourself, but also the right charger.The difference in the chargers lies in the different output currents (charging speed).
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR18650-MH1 Voltage (nominal): 36V (37V) Capacity: 16Ah Energy: 580Wh Configuration: 10S5P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.2.75 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: XT-60 / XT-90 / Anderson PowerPoleDimensions (with bracket) Length: approx. 370 mm Width: 90 mm Height: 85-90 mm