|To 1||€135.00 * (€113.45 Net, VAT €21.56 * )|
|From 2||€129.60 * (€108.91 Net, VAT €20.69 * )|
|From 5||€126.90 * (€106.64 Net, VAT €20.26 * )|
|From 11||€124.20 * (€104.37 Net, VAT €19.83 * )|
Prices incl. VAT plus shipping costs
Production time 5-7 Workdays
- Product number: 11352
ENERpower Softpack battery 36V, format 10S1P, square) | 99Wh | capacity 2.7 Ah | for Pedelecs, eBikes DIY | With INR21700-30T
Suitable to carry with into an aircraft (below 100Wh)
Important General Information
The 36V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (construction 8×4), 10S4P (construction 8×5), 10S5P (construction 8×7) and 10S6P (construction 8×8).
In the rectangular version, 10 cells are used on the longest side (200 mm). We assemble this type of battery in the formats 10S2P (construction 10×2), 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6).
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
|Output in Power:||Until 750 Watt|
|Battery Capacity (range):||Less than 5Ah|