ENERpower softpack battery 48V (set-up 13S2P) 10Ah for eBikes, with 50E battery cells from Samsung in Roswheel Attack bag Important General Information This 48V e-bike battery in softpack is manufactured for insertion in Roswheel carrier bag (Attack). With this bike-frame bag, you can attach the battery to the frame of the eBike and ideally connect it to a mid-sized engine. The frame bag is waterproof and with the separation between charging and discharging cables you don’t have to overplug constantly. The battery cells are assembled in a plastic holder and equipped with a ENERpower branded BMS 20A-22A. The charging is done with a spiral cable (20-100 cm extendable) with an XLR-3-pin connector. Discharging is done via a discharge cable with XT90 connector (male). A counterpart XT90 is also included. A safety fuse of 30A in a waterproof mount limits the power consumption and provides an additional safety measure. This battery is also suitable for engines with up to 950 watts of power. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. The high-quality Roswheel Attack bike-frame bag makes it easy to place the battery under the top frame (as seen in the photos). This carrying bag is water-spray-tight and can carry up to about 5 kg. Compatible with engines 250 watts / 500 watts / 750 watts / 950 watts Battery – Highlights High-quality manufacturing – made in Germany Assembly just-in-time BMS with integrated passive balancer (4.1V pro rechargeable cell) BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring) Assembly with Samsung SDI, Panasonic (Sanyo) or LG Chem cells (subject to availability) directly from the manufacturer Rechargeable – After 300 charging cycles maintains 80% of the original capacity No memory effect – charge the battery whenever you want Environmentally friendly according to EU Directive 2002/95/EC (RoHS) Battery – Technical Data Li-ion Cell: Samsung SDI INR21700-50E Voltage (nominal): 48V (46.8V 48.1V) Capacity: 10 Ah Power: About 480Wh Configuration: 13S2P Internal resistance: < 75 mOhm Charge Voltage: 54.6V Maximum Charging current: 5A End-of-Discharge Voltage: 39V Continuous Discharge Current: 20A = 950 watts 10 seconds 30A: approx. 1440 watts Weight: Approx. 2.15 kg. (Battery only) Roswheel Attack Bike-Frame Bag Waterproof With 6 x Velcro-fastener can be attached to any part of the bike-frame Suitable as frame bag for batteries up to 5 kg.

ENERpower softpack battery 48V (set-up 13S4P) 12.8Ah for eBikes, with MH1 battery cells from LG Chem in Enerpower Frame  bag Important General Information This 48V e-bike battery in softpack is manufactured for insertion in Roswheel carrier bag (Attack). With this bike-frame bag, you can attach the battery to the frame of the eBike and ideally connect it to a mid-sized engine. The frame bag is waterproof and with the separation between charging and discharging cables you don’t have to overplug constantly. The battery cells are assembled in a plastic holder and equipped with a ENERpower branded BMS 20A-22A. The charging is done with a spiral cable (20-100 cm extendable) with an XLR-3-pin connector. Discharging is done via a discharge cable with XT90 connector (male). A counterpart XT90 is also included. A safety fuse of 30A in a waterproof mount limits the power consumption and provides an additional safety measure. This battery is also suitable for engines with up to 950 watts of power. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. The high-quality Roswheel Attack bike-frame bag makes it easy to place the battery under the top frame (as seen in the photos). This carrying bag is water-spray-tight and can carry up to about 5 kg. Compatible with engines 250 watts / 500 watts / 750 watts / 950 watts Battery – Highlights High-quality manufacturing – made in Germany Assembly just-in-time BMS with integrated passive balancer (4.1V pro rechargeable cell) BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring) Assembly with Samsung SDI, Panasonic (Sanyo) or LG Chem cells (subject to availability) directly from the manufacturer Rechargeable – After 300 charging cycles maintains 80% of the original capacity No memory effect – charge the battery whenever you want Environmentally friendly according to EU Directive 2002/95/EC (RoHS) Battery – Technical Data Li-ion Cell: LG Chem INR18650-MH1 Voltage (nominal): 48V (46.8V 48.1V) Capacity: 12.8 Ah Power: About 615Wh Configuration: 13S4P Internal resistance: < 75 mOhm Charge Voltage: 54.6V Maximum Charging current: 5A End-of-Discharge Voltage: 39V Continuous Discharge Current: 20A = 950 watts 10 seconds 30A: approx. 1440 watts Weight: Approx. 2.85 kg. (Battery only) Enerpower Bike-Frame Bag Waterproof With 6 x Velcro-fastener can be attached to any part of the bike-frame Suitable as frame bag for batteries up to 5 kg.

ENERpower softpack battery 48V (set-up 13S3P) 12Ah for eBikes, with INR21700-40T battery cells from Molicel in Enerpower Attack bag Important General Information This 48V e-bike battery in softpack is manufactured for insertion in Roswheel carrier bag (Attack). With this bike-frame bag, you can attach the battery to the frame of the eBike and ideally connect it to a mid-sized engine. The frame bag is waterproof and with the separation between charging and discharging cables you don’t have to overplug constantly. The battery cells are assembled in a plastic holder and equipped with a ENERpower branded Smart BMS 30A. The charging is done with a spiral cable (20-100 cm extendable) with an XLR-3-pin connector. Discharging is done via a discharge cable with XT90 connector (male). A counterpart XT90 is also included. A safety fuse of 30A in a waterproof mount limits the power consumption and provides an additional safety measure. This battery is also suitable for engines with up to 1440 watts of power. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. The high-quality Roswheel Attack bike-frame bag makes it easy to place the battery under the top frame (as seen in the photos). This carrying bag is water-spray-tight and can carry up to about 5 kg. Compatible with engines Up to  1440 Watts (Smart BMS 30A) Up to  1920 Watts (Smart BMS 40A) Battery – Highlights High-quality manufacturing – made in Germany Assembly just-in-time Smart BMS with integrated passive balancer (4.1V pro rechargeable cell) Smart BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring) Assembly with Samsung SDI, Panasonic (Sanyo) or LG Chem cells (subject to availability) directly from the manufacturer Rechargeable – After 300 charging cycles maintains 80% of the original capacity No memory effect – charge the battery whenever you want Environmentally friendly according to EU Directive 2002/95/EC (RoHS) Battery – Technical Data Li-ion Cell: INR21700-40T Voltage (nominal): 48V (46.8V 48.1V) Capacity: 12 Ah Power: About 570Wh Configuration: 13S3P Internal resistance: < 75 mOhm Charge Voltage: 54.6V Maximum Charging current: 8A End-of-Discharge Voltage: 39V Continuous Discharge Current:           30A = 1440 watts           40A = 1920 watts Weight: Approx. 2.85 kg. (Battery only) Enerpower Attack Bike-Frame Bag Waterproof With 6 x Velcro-fastener can be attached to any part of the bike-frame Suitable as frame bag for batteries up to 5 kg.

ENERpower softpack battery 48V (set-up 13S3P) 15Ah for eBikes, with M50 battery cells from LG Chem (21700) in Roswheel Attack bag Important General Information This 48V e-bike battery in softpack is manufactured for insertion in Roswheel carrier bag (Attack). With this bike-frame bag, you can attach the battery to the frame of the eBike and ideally connect it to a mid-sized engine. The frame bag is waterproof and with the separation between charging and discharging cables you don’t have to overplug constantly. The battery cells are assembled in a plastic holder and equipped with a ENERpower branded BMS 20A-22A. The charging is done with a spiral cable (20-100 cm extendable) with an XLR-3-pin connector. Discharging is done via a discharge cable with XT90 connector (male). A counterpart XT90 is also included. A safety fuse of 30A in a waterproof mount limits the power consumption and provides an additional safety measure. This battery is also suitable for engines with up to 950 watts of power. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. The high-quality Roswheel Attack bike-frame bag makes it easy to place the battery under the top frame (as seen in the photos). This carrying bag is water-spray-tight and can carry up to about 5 kg. Compatible with engines 250 watts / 500 watts / 750 watts / 950 watts Battery – Highlights High-quality manufacturing – made in Germany Assembly just-in-time BMS with integrated passive balancer (4.1V pro rechargeable cell) BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring) Assembly with Samsung SDI, Panasonic (Sanyo) or LG Chem cells (subject to availability) directly from the manufacturer Rechargeable – After 300 charging cycles maintains 80% of the original capacity No memory effect – charge the battery whenever you want Environmentally friendly according to EU Directive 2002/95/EC (RoHS) Battery – Technical Data Li-ion Cell: LG Chem INR21700-M50 Voltage (nominal): 48V (46.8V 48.1V) Capacity: 15 Ah Power: About 720Wh Configuration: 13S3P Internal resistance: < 75 mOhm Charge Voltage: 54.6V Maximum Charging current: 5A End-of-Discharge Voltage: 39V Continuous Discharge Current: 20A = 950 watts 10 seconds 30A: approx. 1440 watts Weight: Approx. 3 kg. (Battery only) Roswheel Attack Bike-Frame Bag Waterproof With 6 x Velcro-fastener can be attached to any part of the bike-frame Suitable as frame bag for batteries up to 5 kg.

ENERpower softpack battery 48V (set-up 13S5P) 16Ah for eBikes, with MH1 battery cells from LG Chem in Enerpower frame bag Important General Information This 48V e-bike battery in softpack is manufactured for insertion in Roswheel carrier bag (Attack). With this bike-frame bag, you can attach the battery to the frame of the eBike and ideally connect it to a mid-sized engine. The frame bag is waterproof and with the separation between charging and discharging cables you don’t have to overplug constantly. The battery cells are assembled in a plastic holder and equipped with a ENERpower branded BMS 20A-22A. The charging is done with a spiral cable (20-100 cm extendable) with an XLR-3-pin connector. Discharging is done via a discharge cable with XT90 connector (male). A counterpart XT90 is also included. A safety fuse of 30A in a waterproof mount limits the power consumption and provides an additional safety measure. This battery is also suitable for engines with up to 950 watts of power. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. The high-quality Roswheel Attack bike-frame bag makes it easy to place the battery under the top frame (as seen in the photos). This carrying bag is water-spray-tight and can carry up to about 5 kg. Compatible with engines 250 watts / 500 watts / 750 watts / 950 watts Battery – Highlights High-quality manufacturing – made in Germany Assembly just-in-time BMS with integrated passive balancer (4.1V pro rechargeable cell) BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring) Assembly with Samsung SDI, Panasonic (Sanyo) or LG Chem cells (subject to availability) directly from the manufacturer Rechargeable – After 300 charging cycles maintains 80% of the original capacity No memory effect – charge the battery whenever you want Environmentally friendly according to EU Directive 2002/95/EC (RoHS) Battery – Technical Data Li-ion Cell: LG Chem INR18650-MH1 Voltage (nominal): 48V (46.8V 48.1V) Capacity: 16 Ah Power: About 760Wh Configuration: 13S5P Internal resistance: < 75 mOhm Charge Voltage: 54.6V Maximum Charging current: 5A End-of-Discharge Voltage: 39V Continuous Discharge Current: 20A = 950 watts 10 seconds 30A: approx. 1440 watts Weight: Approx. 3.50 kg. (Battery only) Roswheel Attack Bike-Frame Bag Waterproof With 6 x Velcro-fastener can be attached to any part of the bike-frame Suitable as frame bag for batteries up to 5 kg.