ENERpower battery LiFePO4 24V (25.6V) for the operation of 24V devices, motors etc.
Important general informationWe assemble this series of LiFePo4 batteries in the 8S (25.6V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with 2 different BMS's:1. Up to 15A continuous load - for devices with a consumption of up to 370 watts2. Up to 30A continuous load - for devices with a consumption of up to 740 wattsThe protection against overcharging (29.4V) and against deep discharge (16V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights
High-quality production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring)
Direct from the manufacturer
Rechargeable - Still 80% of original capacity after 1800 full charge cycles
No memory effect - charge the battery whenever you want
Environmentally friendly according to EU directive 2002/95/EG (RoHS)
Technical specifications
Voltage (nominal): 24V (25.6V)
Capacity: 20Ah
Configuration: 8S5P
Energy: about 512Wh
Maximum charging current: 5A
Internal resistance: < 70mOhm
Charging voltage: 29.2V
End-of-discharge voltage: 16V
Weight: approx. 3.6 kg.
Charging: XLR-3
Discharge: XT-60 / XT-90 / Anderson PowerPole
Dimensions:
ca. 225 x 130 x 70 mm
ENERpower battery LiFePO4 24V (25.6V) for the operation of 24V devices, motors etc.
Important general informationWe assemble this series of LiFePo4 batteries in the 8S (25.6V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with 2 different BMS's:1. Up to 15A continuous load - for devices with a consumption of up to 370 watts2. Up to 30A continuous load - for devices with a consumption of up to 740 wattsThe protection against overcharging (29.4V) and against deep discharge (16V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights
High-quality production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring)
Direct from the manufacturer
Rechargeable - Still 80% of original capacity after 1800 full charge cycles
No memory effect - charge the battery whenever you want
Environmentally friendly according to EU directive 2002/95/EG (RoHS)
Technical specifications
Voltage (nominal): 24V (25.6V)
Capacity: 16Ah
Configuration: 8S4P
Energy: about 410Wh
Maximum charging current: 5A
Internal resistance: < 70mOhm
Charging voltage: 29.2V
End-of-discharge voltage: 16V
Weight: approx. 3 kg.
Charging: XLR-3
Discharge: XT-60 / XT-90 / Anderson PowerPole
Dimensions:
ca. 225 x 110 x 74 mm
ENERpower battery LiFePO4 24V (25.6V) for the operation of 24V devices, motors, wheel chairs etc.
Important general informationWe assemble this series of LiFePo4 batteries in the 8S (25.6V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with 2 different BMS's:1. Up to 15A continuous load - for devices with a consumption of up to 370 watts2. Up to 30A continuous load - for devices with a consumption of up to 740 wattsThe protection against overcharging (29.4V) and against deep discharge (16V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights
High-quality production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring)
Direct from the manufacturer
Rechargeable - Still 80% of original capacity after 1800 full charge cycles
No memory effect - charge the battery whenever you want
Environmentally friendly according to EU directive 2002/95/EG (RoHS)
Technical specifications
Voltage (nominal): 24V (25.6V)
Capacity: 28Ah
Configuration: 8S7P
Energy: about 717Wh
Maximum charging current: 8A
Internal resistance: < 70mOhm
Charging voltage: 29.2V
End-of-discharge voltage: 16V
Weight: approx. 5.2 kg.
Charging: XLR-3
Discharge: XT-60 / XT-90 / Anderson PowerPole
Dimensions:
ca. 225 x 200 x 70 mm
ENERpower battery LiFePO4 36V (12S) for the operation of 36V devices, motors etc.
Important general informationWe assemble this series of LiFePo4 batteries in the 12S (36V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with a BMS of 20A - for devices with a consumption of up to 720 wattsThe protection against overcharging (43,2V) and against deep discharge (24V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights
High-quality production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring)
Direct from the manufacturer
Rechargeable - Still 80% of original capacity after 1800 full charge cycles
No memory effect - charge the battery whenever you want
Environmentally friendly according to EU directive 2002/95/EG (RoHS)
Technical specifications
Voltage (nominal): 36V (12S)
Capacity: 16Ah
Configuration: 12S4P
Energy: about 610Wh
Maximum charging current: 8A
Internal resistance: < 70mOhm
Charging voltage: 43.2V
End-of-discharge voltage: 24V
Weight: approx. 4 kg.
Charging: XLR-3
Discharge: XT-60 / XT-90 / Anderson PowerPole
Dimensions:
ca. 330 x 120 x 70 mm
ENERpower battery LiFePO4 36V (12S) for the operation of 36V devices, motors etc.
Important general informationWe assemble this series of LiFePo4 batteries in the 12S (36V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with a BMS of 20A - for devices with a consumption of up to 720 wattsThe protection against overcharging (43,2V) and against deep discharge (24V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights
High-quality production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring)
Direct from the manufacturer
Rechargeable - Still 80% of original capacity after 1800 full charge cycles
No memory effect - charge the battery whenever you want
Environmentally friendly according to EU directive 2002/95/EG (RoHS)
Technical specifications
Voltage (nominal): 36V (12S)
Capacity: 20Ah
Configuration: 12S5P
Energy: about 720Wh
Maximum charging current: 8A
Internal resistance: < 70mOhm
Charging voltage: 43.2V
End-of-discharge voltage: 24V
Weight: approx. 5.4 kg.
Charging: XLR-3
Discharge: XT-60 / XT-90 / Anderson PowerPole
Dimensions:
ca. 330 x 160 x 70 mm
ENERpower battery LiFePO4 36V (12S) for the operation of 36V devices, motors etc.
Important general informationWe assemble this series of LiFePo4 batteries in the 12S (36V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with a BMS of 20A - for devices with a consumption of up to 720 wattsThe protection against overcharging (43,2V) and against deep discharge (24V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights
High-quality production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring)
Direct from the manufacturer
Rechargeable - Still 80% of original capacity after 1800 full charge cycles
No memory effect - charge the battery whenever you want
Environmentally friendly according to EU directive 2002/95/EG (RoHS)
Technical specifications
Voltage (nominal): 36V (12S 38.4V)
Capacity: 24Ah
Configuration: 12S6P
Energy: about 920Wh
Maximum charging current: 8A
Internal resistance: < 70mOhm
Charging voltage: 43.2V
End-of-discharge voltage: 24V
Weight: approx. 6.5 kg.
Charging: XLR-3
Discharge: XT-60 / XT-90 / Anderson PowerPole
Dimensions:
ca. 330 x 170 x 70 mm
ENERpower battery LiFePO4 36V (12S) for the operation of 36V devices, motors etc.
Important general informationWe assemble this series of LiFePo4 batteries in the 12S (36V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with a BMS of 20A - for devices with a consumption of up to 720 wattsThe protection against overcharging (43,2V) and against deep discharge (24V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights
High-quality production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring)
Direct from the manufacturer
Rechargeable - Still 80% of original capacity after 1800 full charge cycles
No memory effect - charge the battery whenever you want
Environmentally friendly according to EU directive 2002/95/EG (RoHS)
Technical specifications
Voltage (nominal): 36V (12S 38.4V)
Capacity: 24Ah
Configuration: 12S6P
Energy: about 920Wh
Maximum charging current: 8A
Internal resistance: < 70mOhm
Charging voltage: 43.2V
End-of-discharge voltage: 24V
Weight: approx. 6.5 kg.
Charging: XLR-3
Discharge: XT-60 / XT-90 / Anderson PowerPole
Dimensions:
ca. 330 x 170 x 70 mm
ENERpower battery LiFePO4 48V (15S) for the operation of 48V devices, motors etc.
Important general informationWe assemble this series of LiFePo4 batteries in the 15S (48V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with a BMS of 20A - for devices with a consumption of up to 950 wattsThe protection against overcharging (55V) and against deep discharge (30V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights
High-quality production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring)
Direct from the manufacturer
Rechargeable - Still 80% of original capacity after 1800 full charge cycles
No memory effect - charge the battery whenever you want
Environmentally friendly according to EU directive 2002/95/EG (RoHS)
Technical specifications
Voltage (nominal): 48V (15S)
Capacity: 20Ah
Configuration: 15S5P
Energy: about 960Wh
Discharge Current: 20A
Maximum charging current: 8A
Internal resistance: < 70mOhm
Charging voltage: 54V
End-of-discharge voltage: 30V
Weight: approx. 6 kg.
Charging: XLR-3
Discharge: XT-60 / XT-90 / Anderson PowerPole
Dimensions:
ca. 420 x 130 x 70 mm
ENERpower battery LiFePO4 48V (15S) for the operation of 48V devices, motors etc.
Important general informationWe assemble this series of LiFePo4 batteries in the 15S (48V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with a BMS of 30A - for devices with a consumption of up to 1440 wattsThe protection against overcharging (55V) and against deep discharge (30V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights
High-quality production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring)
Direct from the manufacturer
Rechargeable - Still 80% of original capacity after 1800 full charge cycles
No memory effect - charge the battery whenever you want
Environmentally friendly according to EU directive 2002/95/EG (RoHS)
Technical specifications
Voltage (nominal): 48V (15S)
Capacity: 20Ah
Configuration: 15S5P
Energy: about 960Wh
Discharge Current: 30A
Maximum charging current: 8A
Internal resistance: < 70mOhm
Charging voltage: 54V
End-of-discharge voltage: 30V
Weight: approx. 6 kg.
Charging: XLR-3
Discharge: XT-60 / XT-90 / Anderson PowerPole
Dimensions:
ca. 420 x 130 x 70 mm
ENERpower battery LiFePO4 48V (15S) for the operation of 48V devices, motors etc.
Important general informationWe assemble this series of LiFePo4 batteries in the 15S (48V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with a BMS of 20A - for devices with a consumption of up to 950 wattsThe protection against overcharging (55V) and against deep discharge (30V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights
High-quality production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring)
Direct from the manufacturer
Rechargeable - Still 80% of original capacity after 1800 full charge cycles
No memory effect - charge the battery whenever you want
Environmentally friendly according to EU directive 2002/95/EG (RoHS)
Technical specifications
Voltage (nominal): 48V (15S)
Capacity: 24Ah
Configuration: 15S6P
Energy: about 1152Wh
Maximum charging current: 8A
Internal resistance: < 70mOhm
Charging voltage: 54V
End-of-discharge voltage: 30V
Weight: approx. 8 kg.
Charging: XLR-3
Discharge: XT-60 / XT-90 / Anderson PowerPole
Dimensions:
ca. 420 x 160 x 70 mm
ENERpower battery LiFePO4 48V (15S) for the operation of 48V devices, motors etc.
Important general informationWe assemble this series of LiFePo4 batteries in the 15S (48V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with a BMS of 30A - for devices with a consumption of up to 1440 wattsThe protection against overcharging (55V) and against deep discharge (30V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights
High-quality production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring)
Direct from the manufacturer
Rechargeable - Still 80% of original capacity after 1800 full charge cycles
No memory effect - charge the battery whenever you want
Environmentally friendly according to EU directive 2002/95/EG (RoHS)
Technical specifications
Voltage (nominal): 48V (15S)
Capacity: 24Ah
Configuration: 15S6P
Energy: about 1152Wh
Maximum charging current: 15A
Internal resistance: < 70mOhm
Charging voltage: 54V
End-of-discharge voltage: 30V
Weight: approx. 8.8 kg.
Charging: XLR-3
Discharge: XT-60 / XT-90 / Anderson PowerPole
Dimensions:
ca. 420 x 160 x 70 mm
€530.00*
We Have a New Website!
or
This website uses cookies to ensure the best experience possible. More information...