ENERpower soft pack battery 48V | Format 13S3P | Energy 720 Wh | Capacity 15 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50TImportant general informationThis battery was used for the new model UDX and in some of the UNIMOKE bikes. The bracket, as seen in the picture, has 4 pins. The assignment of plus and minus on the contacts is identical to this model and the battery can replace the old one without any adjustments.Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 300 charge cycles    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: LG Chem INR21700-M50T    Voltage (nominal): 48V    Capacity: 15Ah    Energy: 720Wh    Configuration: 13S3P    Internal resistance: <75 mOhm    Charging voltage: 54.6V    Final discharge voltage: 39V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Safety Fuse: 30A    Weight: approx.3.50 kg (without bracket)    Charging: DC    Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector) dimensions    Length: 368 mm     Width: 95 mm    Height: 103 mm

ENERpower Megiddo battery 48V for the Frame | Format 13S4P | Energy 960Wh | Capacity 20 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50T.Important general information.This battery was used for the new model UDX and in some of the UNIMOKE bikes. The bracket, as seen in the picture, has 4 pins. The assignment of plus and minus on the contacts is identical to this model and the battery can replace the old one without any adjustments. Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 300 charge cycles    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: LG Chem INR21700-M50T    Voltage (nominal): 48V    Capacity: 20Ah    Energy: 960Wh    Configuration: 13S4P    Internal resistance: <75 mOhm    Charging voltage: 54.6V    Final discharge voltage: 39V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Safety Fuse: 30A    Weight: approx.4.30 kg (without bracket)    Charging: DC round plug 5.5 mm / 2.5 mm    Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)dimensions    Length: 368 mm    Width: 95 mm    Height: 122 mm

Enerpower Silverfish Battery 48V 14.25Ah with no Bracket (410 x 115 x 75 mm) - Second Choice The battery is new, but has some small damages on the case (like Scratches) Description Enerpower Silverfish 36V 14,25Ah (515Wh) battery without a holder, which is designed for use with the UNI MK and UNI Swing models with 36V. The battery is manufactured in Germany and is made to order with a just-in-time manufacturing process. It comes with a built-in battery management system (BMS) that includes a passive balancer and protects against overcharging, deep discharge, and over-discharge. The BMS also monitors temperature. The battery is rechargeable and can retain 80% of its original capacity after 300 charging cycles. It has no memory effect, meaning it can be charged at any time without affecting its performance. It is also environmentally friendly, in accordance with EU directive 2002/95/EG (RoHS). Technical certification: Battery cells: Samsung SDI INR18650-29E lithium-ion cells, nominal voltage of 36V capacity of 14.25Ah energy of 515Wh.  Configuration: 10S5P internal resistance: less than 75 mOhm. The battery can be charged using an XLR-3-Pin connector and discharged using the plus and minus contacts on the battery's contact plate. The battery has a weight of approximately 3.45 kg  Dimensions of 410 x 110 x 75 mm. BMS: can handle a continuous discharge current of up to 22A, a 10-minute discharge current of up to 25A, and a 5-second discharge current of up to 30A. The battery also has a 30A fuse for added safety.

ENERpower Frame Battery Li-Ion Hailong PLUS DIY 48V from own manufacturing 16Ah (765Wh) with LG Chem INR18650-MH1 Important General Information This battery was used for the older model UDX. The bracket, as seen in the picture, has 5 pins. The assignment of plus and minus on the contacts is identical to this model and the battery can replace the old one without any adjustments. Highlights High-quality manufacturing – made in Germany Assembly just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring) directly from the manufacturer Rechargeable – After 300 charging cycles maintains 80% of the original capacity No memory effect – charge the battery whenever you want Environmentally friendly according to EU Directive 2002/95/EC (RoHS) Technical data Li-Ion Cell: LG Chem INR18650-MH1 Voltage (nominal): 48V Capacity: 16Ah Power: 765Wh Configuration: 13S5P Internal resistance: < 75 mOhm Charging voltage: 54.6V End-of-Discharge Voltage: 39V BMS Continuous Discharge Current: 22A BMS 10 Min. Discharge Current: 25A BMS 5 Seconds Discharge Current: 30A Safety Fuse: 30A Weight: approx. 3.65 kg. Charge: DC round plug 5.5 mm/2.5 mm Discharge: Cable with 30A fuse with XT90 power connector

ENERpower Bike-Frame Battery Li-ion Hailong PRO DIY 48V from own production 13.8Ah (660WH) with Samsung SDI INR18650-35E Important General Information This battery was used for the older model UDX. The bracket, as seen in the picture, has 5 pins. The assignment of plus and minus on the contacts is identical to this model and the battery can replace the old one without any adjustments. Highlights High-quality manufacturing – made in Germany Assembly just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring) Samsung SDI INR18650-35E Li-Ion cells–>up to 8A continuous load per parallel circuit directly from the manufacturer Rechargeable – After 300 charging cycles maintains 80% of the original capacity No memory effect – charge the battery whenever you want Environmentally friendly according to EU Directive 2002/95/EC (RoHS) Technical Data Li-ion Cell: Samsung SDI INR18650-35E Voltage (nominal): 48V Capacity: 13.80Ah Energy: 660Wh Configuration: 13S4P Internal resistance: < 75 mOhm Charging voltage: 54.6V End-of-Discharge Voltage: 39V BMS Continuous Discharge Current: 22A BMS 10 Min. Discharge Current: 25A BMS 5 Seconds Discharge Current: 30A Safety Fuse: 30A Weight: approx. 2.95 kg. Charge: DC round plug 5.5 mm/2.5 mm Discharge: Cable with 30A fuse with XT90 power connector Scope of Delivery 1 x battery Hailong PRO 48V 13.8Ah 1 x holder with XT90 discharge cable Rubber plates 2 x keys Optional (surcharge): 1 x battery charger 2A or 3A or 5A