ENERpower Bike-Frame-Battery Li-Ion Hailong Reention Jaffa DIY 52V (14S) from own manufacturing 16Ah (830Wh)
For motors from 250 Watts and up to 1050 Watts
This 52V battery in the Hailong Reention Jaffa case, which we manufacture, can be mounted on the frame or on the luggage carrier of the bike. The batteries are manufactured in cell holders made of plastic. Charging is made possible with a DC circular connector (5.5 mm / 2.5 mm), discharging via the bracket (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This case can hold up to 70 18650 battery cells. With a BMS that can withstand 20A-22A continuous load, this battery is suitable for motors with up to 1050 watts of power, working in 52V (14S) systems.The battery holder is very small and therefore we implement the Fuse inside the Discharge Cable
The On/Off button enable the user the turn the battery on and off as an additional feature.
Highlights
High quality assembly – Made in Germany
Assembly Just-In-Time
BMS with an integrated passive balancer
BMS with protection against overcharge, over-discharge, deep-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 500 charging cycles, still maintaines about 70% of the original capacity
No memory effect – charge your battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Details
Li-Ion-cell: LG Chem INR18650-MH1
Voltage (nominal): 52V (50.4V-51.8V)
Capacity: 16Ah
Power: 830Wh
Configuration: 14S5P
Internal resistance: < 75 mOhm
Charge Voltage: 58.8V
End-of-discharge Voltage: 42V
BMS continueous discharge current: 22A
BMS 10 Min. discharge current: 25A
BMS 5 Sec. discharge current: 30A
Safety fuse: 30A
Weight: approx. 3.95 Kg.
Charging: Zenith IP67 3-Pins
Discharging: Cable with fuse 30A with XT-60
ENERpower battery LiFePO4 48V (15S) for the operation of 48V devices, motors etc.
Important general informationWe assemble this series of LiFePo4 batteries in the 15S (48V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with a BMS of 20A - for devices with a consumption of up to 950 wattsThe protection against overcharging (55V) and against deep discharge (30V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights
High-quality production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring)
Direct from the manufacturer
Rechargeable - Still 80% of original capacity after 1800 full charge cycles
No memory effect - charge the battery whenever you want
Environmentally friendly according to EU directive 2002/95/EG (RoHS)
Technical specifications
Voltage (nominal): 48V (15S)
Capacity: 20Ah
Configuration: 15S5P
Energy: about 960Wh
Discharge Current: 20A
Maximum charging current: 8A
Internal resistance: < 70mOhm
Charging voltage: 54V
End-of-discharge voltage: 30V
Weight: approx. 6 kg.
Charging: XLR-3
Discharge: XT-60 / XT-90 / Anderson PowerPole
Dimensions:
ca. 220 x 130 x 140 mm
Important general informationThis 36V battery in the Nablus luggage rack housing that we assemble in Berlin, Germany,comes with a rack for the luggage rack. The batteries are assembled in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90 connector. Up to 60 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.An on / off switch is also located on the battery and there is no charge indicator (Fuel Gauge) in this Case.
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Samsung SDI INR18650-29E Li-Ion cells -> up to 8A continuous load per parallel connection Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR18650-MH1 Voltage (nominal): 36V (37V) Capacity: 19.20Ah Configuration: 10S6P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.2.75 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT90 high current connector (counterpart is included)dimensions:Length: approx. 438 mmWidth: approx. 156 mmHeight: 67 mmScope of delivery:1 x battery Enerpower Nablus 36V 19.20Ah1 x luggage rack FME0006
Important general informationThis 36V battery in the Nablus luggage rack housing that we assemble in Berlin, Germany,comes with a rack for the luggage rack. The batteries are assembled in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90 connector. Up to 60 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.An on / off switch is also located on the battery and there is no charge indicator (Fuel Gauge) in this Case.
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Samsung SDI INR18650-29E Li-Ion cells -> up to 8A continuous load per parallel connection Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR18650-MH1 Voltage (nominal): 36V (37V) Capacity: 19.20Ah Configuration: 10S6P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.2.75 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT90 high current connector (counterpart is included)dimensions:Length: approx. 438 mmWidth: approx. 156 mmHeight: 67 mmScope of delivery:1 x battery Enerpower Nablus 36V 19.20Ah1 x luggage rack FME0006
Important general informationThis 36V battery in the Gath luggage rack housing that we assemble in Berlin, Germany,comes with a rack for the luggage rack. The batteries are assembled in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90 connector. Up to 52 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.An on / off switch is also located on the battery and there is a charge indicator (Fuel Gauge) in this Case. The back light is operated via its own On/Off button.
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Samsung SDI INR18650-35E Li-Ion cells Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR18650-35E Voltage (nominal): 36V (37V) Capacity: 20.30Ah Configuration: 10S6P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.3.35 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT90 high current connector (counterpart is included)dimensions:Length: approx. 438 mmWidth: approx. 156 mmHeight: 67 mmScope of delivery:1 x battery Enerpower Nablus 36V 20.30Ah with INR18650-35E1 x luggage rack FME0006
Important general informationThis 48V battery in the Gath luggage rack housing that we assemble in Berlin, Germany,comes with a rack for the luggage rack. The batteries are assembled in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90 connector. Up to 52 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 950 watts of power that work in 48V (13) systems.An on / off switch is also located on the battery and there is a charge indicator (Fuel Gauge) in this Case. The back light is operated via its own On/Off button.
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Samsung SDI INR18650-29E Li-Ion cells Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR18650-29E Voltage (nominal): 48V (13S) Capacity: 11.60Ah Configuration: 13S4P Internal resistance: <75 mOhm Charging voltage: 54.6V Final discharge voltage: 39V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.3.35 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT90 high current connector (counterpart is included)dimensions:Length: approx. 438 mmWidth: approx. 156 mmHeight: 67 mmScope of delivery:1 x battery Enerpower Nablus 48V 11.60Ah with INR18650-29E1 x luggage rack FME0006
Important general informationThis 48V battery in the Gath luggage rack housing that we assemble in Berlin, Germany,comes with a rack for the luggage rack. The batteries are assembled in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90 connector. Up to 52 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 950 watts of power that work in 48V (13S) systems.An on / off switch is also located on the battery and there is a charge indicator (Fuel Gauge) in this Case. The back light is operated via its own On/Off button.
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR18650-35E Voltage (nominal): 48V (13S) Capacity: 13.80Ah Configuration: 13S4P Internal resistance: <75 mOhm Charging voltage: 54.6V Final discharge voltage: 39V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.3.35 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT90 high current connector (counterpart is included)dimensions:Length: approx. 438 mmWidth: approx. 156 mmHeight: 67 mmScope of delivery:1 x battery Enerpower Nablus 48V 13.80Ah with INR18650-35E1 x luggage rack FME0006
Important general informationThis 48V battery in the Nablus luggage rack housing that we assemble in Berlin, Germany,comes with a rack for the luggage rack. The batteries are assembled in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90 connector. Up to 52 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 1000 watts of power that work in 48V (13S) systems.An on / off switch is also located on the battery and there is no charge indicator (Fuel Gauge) in this Case.
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Samsung SDI INR18650-35E Li-Ion cells -> up to 8A continuous load per parallel connection Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR18650-35E Voltage (nominal): 48V (46.8V - 48.1V) Capacity: 13.8Ah Configuration: 13S4P Internal resistance: <75 mOhm Charging voltage: 54.6V Final discharge voltage: 39V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.2.85 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT90 high current connector (counterpart is included)dimensions:Length: approx. 438 mmWidth: approx. 156 mmHeight: 67 mmScope of delivery:1 x battery Enerpower Nablus 48V 13.8Ah with INR18650-35E1 x luggage rack FME0006
ENERpower Hebron battery 48V for the Frame | Format 14S5P | Energy 1295Wh | Capacity 25 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50T.Important general informationThis 48V battery in the Hailong Hebron housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a Zenith 3-Pins Charging socketunloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 70 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 950 watts of power that work in 48V (13S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 500 charge cycles (according to LG Chem battery specification) No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR21700-M50T Voltage (nominal): 52V Capacity: 25Ah Energy: 1295Wh Configuration: 14S5P Internal resistance: <75 mOhm Charging voltage: 54.6V Final discharge voltage: 39V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Safety Fuse: 30A Weight: approx. 5.25 kg (without bracket) Charging: DC 5.5 x 2.1 mm Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)dimensions Length: 368 mm Width: 95 mm Height: 156 mm
ENERpower soft pack battery 36V | Format 10S4P | Energy 720 Wh | Capacity 20 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50TImportant general informationThis 36V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. The charging of the battery is done with an IP67 3-PIN Zenith connector (an adapter of XLR-3 on Zenith will be added)Discharging of the battery takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 40 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 500 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR21700-50E Voltage (nominal): 36V Capacity: 20Ah Energy: 720Wh Configuration: 10S4P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Safety Fuse: 30A Weight: approx.3.50 kg (without bracket) Charging: Zenith IP-67 3-Pins Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)
dimensions Length: 368 mm Width: 95 mm Height: 103 mm
ENERpower soft pack battery 48V | Format 13S3P | Energy 720 Wh | Capacity 15 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50TImportant general informationThis 48V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a Round Plug DCunloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 40 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 1000 watts of power that work in 48V (13S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR21700-M50T Voltage (nominal): 48V Capacity: 15Ah Energy: 720Wh Configuration: 13S3P Internal resistance: <75 mOhm Charging voltage: 54.6V Final discharge voltage: 39V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Safety Fuse: 30A Weight: approx.3.50 kg (without bracket) Charging: DC Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)
dimensions Length: 368 mm Width: 95 mm Height: 103 mm
ENERpower Frame battery LOD battery 36V | Format 10S4P | Energy 720 Wh | Capacity 20 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50TImportant general informationThis 36V battery in the Hailong Lod housing, which we assemble , can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. The charging of the battery is done with a DC Round Plug 5.5 x 2.1 mmDischarging of the battery takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 40 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, that is located in the front.So you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 500 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR21700-50E Voltage (nominal): 36V Capacity: 20Ah Energy: 720Wh Configuration: 10S4P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Safety Fuse: 30A Weight: approx.3.50 kg (without bracket) Charging: DC 5.5 x 2.1 mm Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)
dimensions Length: 320 mm Width: 88.5 mm Height: 117 mm
ENERpower Megiddo battery 48V for the Frame | Format 13S4P | Energy 960Wh | Capacity 20 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50T.Important general informationThis 48V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm),unloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 52 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR21700-M50T Voltage (nominal): 48V Capacity: 20Ah Energy: 960Wh Configuration: 13S4P Internal resistance: <75 mOhm Charging voltage: 54.6V Final discharge voltage: 39V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Safety Fuse: 30A Weight: approx.4.30 kg (without bracket) Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)dimensions Length: 368 mm Width: 95 mm Height: 122 mm
ENERpower HaiLong Frame Battery Li-Ion 36V 11.20Ah for Pedelecs & eBikes DIY Conversion Kit.
For motors from 250 Watts and up to 750 Watts
Important general information
The 36V batteries in Hailong I case, which we assemble, are so-called “Frame Batteries”, which can be fixed to the bike’s frame. The batteries are assembled with plastic cell-holders. Charging is enabled using a DC round plug (5.5 mm / 2.1 mm) and discharging is done with a discharge cable with an XT90 plug.
The Hailong I is the most compact case of its kind with space for 40 18650 Li-ion cells, and suitable especially for users, which are looking to save space on the bikes. The battery is placed in a case which can be easily mounted on the frame of the bike.
The BMS (Battery Management System) can somewhat withstand a constant current (22A). Hence this battery is suitable also for motors with up tp 750W.
So you can choose not only the connector itself, but also the right charger. The difference between the chargers is due to the different output currents (charging speed).
Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Weight: About 2.25 kg.
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical data
Li-ion cell: BAK
Voltage (nominal): 36V (37V)
Capacity: 11.20Ah
Power: About 405Wh
Configuration: 10S4P
Internal resistance: < 75 mOhm
Charge Voltage: 42V
End-of-Discharge Voltage: 30V
Maximum charging: 5A
Continuous Discharge Current: 20A = 720 watts
10 Min. Discharge current: 25A = 900 Watts
5 Seconds Discharge Current: 35A = 1260 Watts
Dimensions
Length: About 365 mm
Width: 92 mm
Height: 106 mm
Scope of Delivery
Akku 36V 8,8Ah
Halterung
2 Schlüssel
ENERpower HaiLong Masada Frame Battery Li-Ion 36V 15Ah for Pedelecs & eBikes DIY Conversion Kit.
For motors from 250 Watts and up to 750 Watts
Important general information
The 36V batteries in Hailong Masada case, which we assemble, are so-called “Frame Batteries”, which can be fixed to the bike’s frame. The batteries are assembled with plastic cell-holders. Charging is enabled using a DC round plug (5.5 mm / 2.1 mm) and discharging is done with a discharge cable with an XT90 plug.
The Hailong Masada is the most compact case of its kind with space for 50 18650, oder 30 21700 Li-ion cells and suitable especially for users, which are looking to save space on the bikes. The battery is placed in a case which can be easily mounted on the frame of the bike.
The BMS (Battery Management System) can somewhat withstand a constant current (22A). Hence this battery is suitable also for motors with up tp 750W.
This case has also an ON-Off-Switch and has special silicon insultion to protect it from water.
So you can choose not only the connector itself, but also the right charger. The difference between the chargers is due to the different output currents (charging speed).
Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Weight: About 2.85 kg.
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical data
Li-ion cell: LG Chem INR21700-M50T
Voltage (nominal): 36V (37V)
Capacity: 15Ah
Power: About 540Wh
Configuration: 10S3P
Internal resistance: < 75 mOhm
Charge Voltage: 42V
End-of-Discharge Voltage: 30V
Maximum charging: 5A
Continuous Discharge Current: 20A = 720 watts
10 Min. Discharge current: 25A = 900 Watts
5 Seconds Discharge Current: 35A = 1260 Watts
Dimensions
Length: About 425 mm
Width: 90 mm
Height: 105 mm
Scope of Delivery
Akku 36V 8,8Ah
Halterung
2 Schlüssel
ENERpower Frame Battery Li-Ion Hailong PLUS DIY 48V from own manufacturing 16Ah (765Wh) with LG Chem INR18650-MH1
For motors up to 950 Watt
Important General Information
This 48V battery in the Hailong PLUS case, which we manufacture, can be mounted on the frame or on the luggage carrier of the bike. The batteries are manufactured in cell holders made of plastic. Charging is made possible with a DC circular connector (5.5 mm / 2.5 mm), discharging via the bracket (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This case can hold up to 65 18650 battery cells. With a BMS that can withstand 20A-22A continuous load, this battery is suitable for motors with up to 1000 watts of power, working in 48V (13S) systems.The battery holder is identical to the Hailong Pro holder (52-cell case). So you can use the holder for the 2 different cases.So you can choose not only the connector itself, but also the right charger. The difference in the chargers is due to the different output currents (charging speed).
Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical data
Li-Ion Cell: LG Chem INR18650-MH1
Voltage (nominal): 48V
Capacity: 16Ah
Power: 765Wh
Configuration: 13S5P
Internal resistance: < 75 mOhm
Charging voltage: 54.6V
End-of-Discharge Voltage: 39V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 3.65 kg.
Charge: DC round plug 5.5 mm/2.5 mm
Discharge: Cable with 30A fuse with XT90 power connector
ENERpower Frame Battery Li-Ion Hailong PLUS DIY 48V from own manufacturing 17.Ah (825Wh) with LG Chem INR18650-MJ1
For motors up to 950 Watt
Important General Information
This 48V battery in the Hailong PLUS case, which we manufacture, can be mounted on the frame or on the luggage carrier of the bike. The batteries are manufactured in cell holders made of plastic. Charging is made possible with a DC circular connector (5.5 mm / 2.5 mm), discharging via the bracket (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This case can hold up to 65 18650 battery cells. With a BMS that can withstand 20A-22A continuous load, this battery is suitable for motors with up to 1000 watts of power, working in 48V (13S) systems.The battery holder is identical to the Hailong Pro holder (52-cell case). So you can use the holder for the 2 different cases.So you can choose not only the connector itself, but also the right charger. The difference in the chargers is due to the different output currents (charging speed).
Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical data
Li-Ion Cell: LG Chem INR18650-MJ1
Voltage (nominal): 48V
Capacity: 17.2Ah
Power: 825Wh
Configuration: 13S5P
Internal resistance: < 75 mOhm
Charging voltage: 54.6V
End-of-Discharge Voltage: 39V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 3.65 kg.
Charge: DC round plug 5.5 mm/2.5 mm
Discharge: Cable with 30A fuse with XT90 power connector
ENERpower frame battery Li-Ion Hailong PLUS DIY 36V (37V) from our own assembly in Berlin with INR18650-MH1 For motors from 250 watts to 750 wattsImportant general informationThis 36V battery in the Hailong PLUS housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm), discharging takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. Up to 65 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.The battery holder is identical to the Hailong Pro holder (housing with space for 52 battery cells). So you can use the bracket for the 2 different housings.So you can not only choose the connector yourself, but also the right charger.The difference in the chargers lies in the different output currents (charging speed).
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR18650-MH1 Voltage (nominal): 36V (37V) Capacity: 19.20Ah Energy: 695Wh Configuration: 10S6P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.3.35 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: XT-60, XT-90, Anderson PowerPole
ENERpower frame battery Li-Ion Hailong Pro DIY 36V (37V) from our own assembly line in Berlin with LG Chem INR18650-MH1 For motors from 250 watts to 750 wattsImportant general informationThis 36V battery in the Hailong Pro housing, which we assemble in Berlin, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm), discharging takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (Discharge) connector. Up to 52 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.The battery holder is identical to the Hailong Plus holder (housing with space for 65 battery cells). So you can use the holder for the 2 different housings.So you can not only choose the connector yourself, but also the right charger.The difference in the chargers lies in the different output currents (charging speed).
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR18650-MH1 Voltage (nominal): 36V (37V) Capacity: 16Ah Energy: 580Wh Configuration: 10S5P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.2.75 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: XT-60 / XT-90 / Anderson PowerPoleDimensions (with bracket) Length: approx. 370 mm Width: 90 mm Height: 85-90 mm
ENERpower Bike-Frame Battery Li-ion Hailong PRO DIY 48V from own production 13.8Ah (660WH) with Samsung SDI INR18650-35E
For motors up to 950 Watt
Important General Information
This 48V battery in the Hailong Pro case, that we manufacture, can be mounted on the bike’s frame, or on the rear carrier. The batteries are manufactured in plastic cell holders. The charging is made possible with a DC round plug (5.5 mm/2.5 mm), the discharge is carried out via the holder (separable from the battery) with XT90 connection piece. This case can accommodate up to 52 battery cells of type 18650.
With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 950W working in 48V systems.
The battery holder is identical to the Hailong Plus holder (case with space for 65 battery cells). So you can use the bracket for the 2 different housings.
Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
Samsung SDI INR18650-35E Li-Ion cells–>up to 8A continuous load per parallel circuit
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical Data
Li-ion Cell: Samsung SDI INR18650-35E
Voltage (nominal): 48V
Capacity: 13.80Ah
Energy: 660Wh
Configuration: 13S4P
Internal resistance: < 75 mOhm
Charging voltage: 54.6V
End-of-Discharge Voltage: 39V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 2.95 kg.
Charge: DC round plug 5.5 mm/2.5 mm
Discharge: Cable with 30A fuse with XT90 power connector
Scope of Delivery
1 x battery Hailong PRO 48V 13.8Ah
1 x holder with XT90 discharge cable
Rubber plates
2 x keys
Optional (surcharge): 1 x battery charger 2A or 3A or 5A
ENERpower Softpack battery 36V, format 10S2P, square) | 360 Wh | capacity 10 Ah | for Pedelecs, eBikes DIY | LG Chem M50.
Important General Information
The 36V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (construction 8×4), 10S4P (construction 8×5), 10S5P (construction 8×7) and 10S6P (construction 8×8).
In the rectangular version, 10 cells are used on the longest side (200 mm). We assemble this type of battery in the formats 10S2P (construction 10×2), 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6).
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 36V motors
250 watts / 500 watts / 540 watts / 700 watts
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
With battery cells INR21700-M50 from LG Chem
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: INR21700-M50 from LG Chem
Voltage (nominal): 36V (37V)
Capacity: 10 Ah
Power: approx. 360 Wh
Configuration: 10S2P (set up: 5x4)
Internal resistance: < 75 mOhm
Charge voltage: 42V
End-of-discharge voltage: 30V
Continuous discharge Current: 15A = 720 watts
10 minutes discharge Current: 20A = 900 watts
5 seconds discharge current: 25A = 1080 watts
Weight: 1.6 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90
Dimensions
Length: 110 mm
Width: 88 mm – 100 mm
Height: 72 mm
ENERpower Softpack battery 36V, format 10S2P rectangular | 360 Wh | capacity 10 Ah | for Pedelecs, eBikes DIY | LG Chem M50T.
Important General Information
The 36V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (construction 8×4), 10S4P (construction 8×5), 10S5P (construction 8×7) and 10S6P (construction 8×8).
In the rectangular version, 10 cells are used on the longest side (200 mm). We assemble this type of battery in the formats 10S2P (construction 10×2), 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6).
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 36V motors
250 Watts / 500 Watts / 540 Watts
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
With battery cells INR21700-M50 from LG Chem
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: LG Chem INR21700-M50
Voltage (nominal): 36V (37V)
Capacity: 10 Ah
Power: approx. 360 Wh
Configuration: 10S2P (set up: 10×2)
Internal resistance: < 75 mOhm
Charge voltage: 42V
End-of-discharge voltage: 30V
Continuous discharge Current: 15A = 720 watts
10 minutes discharge Current: 20A = 900 watts
5 seconds discharge current: 25A = 1080 watts
Weight: 1.6 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90
Dimensions
Length: 220 mm
Width: 44 mm – 56 mm
Height: 72 mm
ENERpower Softpack battery 36V in format 10S3P RECTANGULAR | 435Wh | capacity 12 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-40T
Important General Information
The 36V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (construction 8×4), 10S4P (construction 8×5), 10S5P (construction 8×7) and 10S6P (construction 8×8).
In the rectangular version, 10 cells are used on the longest side (200 mm). We assemble this type of battery in the formats 10S2P (construction 10×2), 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6).
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
A smart BMS is digitally controlled and therefore more accurate. The BMS reads more powerfully and also supports recuperation.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 36V motors
250 watts / 500 watts / 750 watts / 950 Watt / 1080 Watt / 1440 Watts
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: Samsung SDI INR21700-40T
Voltage (nominal): 36V (37V)
Capacity: 12 Ah
Power: approx. 435 Wh
Configuration: 10S3P (set up: 10x3 - rectangular)
Internal resistance: < 75 mOhm
Charge voltage: 42V
End-of-discharge voltage: 30V
Charge Max.: 8A
Continuous discharge Current: 30A = 1080 Watt or 40A = 1440 watts
5 seconds discharge current: 50A = 1800 watts
Weight: approx. 2.5 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90
Dimensions
Length: 230 mm
Width: 70mm – 90 mm
Height: 74 mm
ENERpower Softpack battery 36V in format 10S6P square | 725 Wh | capacity 19.2 Ah | for Pedelecs, eBikes DIY | with MH1.
Important General Information
The 36V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (construction 8×4), 10S4P (construction 8×5), 10S5P (construction 8×7) and 10S6P (construction 8×8).
In the rectangular version, 10 cells are used on the longest side (200 mm). We assemble this type of battery in the formats 10S2P (construction 10×2), 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6).
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 36V motors
30A BMS: 250 watts up to 1080 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: LG Chem INR18650-MH1
Voltage (nominal): 36V (37V)
Capacity: 19.2 Ah
Power: approx. 705 Wh
Configuration: 10S6P (set up: 10x6)
Internal resistance: < 75 mOhm
Charge voltage: 42V
End-of-discharge voltage: 30V
Charge Max.: 8A
Continuous discharge Current: 30A = 1080 watts
Weight: approx. 3.25 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90
Dimensions
Length: 210 mm
Width: 120 mm – 130 mm
Height: 65-68 mm
€430.00*
We Have a New Website!
or
This website uses cookies to ensure the best experience possible. More information...