ENERpower Hebron battery 48V for the Frame | Format 13S5P | Energy 1200Wh | Capacity  25 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50T.Important general informationThis 48V battery in the Hailong Hebron housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a Zenith 3-Pins Charging socketunloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 70 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 950 watts of power that work in 48V (13S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 500 charge cycles (according to LG Chem battery specification)    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: LG Chem INR21700-M50T    Voltage (nominal): 48V    Capacity: 25Ah    Energy: 1200Wh    Configuration: 13S5P    Internal resistance: <75 mOhm    Charging voltage: 54.6V    Final discharge voltage: 39V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Safety Fuse: 30A    Weight: approx. 5 kg (without bracket)    Charging: DC 5.5 x 2.1 mm    Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)dimensions    Length: 368 mm    Width: 95 mm    Height: 155 mm

ENERpower soft pack battery 48V | Format 13S3P | Energy 720 Wh | Capacity 12Ah, or 15 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50T, or Molicel P42AImportant general informationThis 48V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a special connector 3-Pins from Zenithunloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 40 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 1000 watts of power that work in 48V (13S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 300 charge cycles    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: Samsung SDI INR21700-50E    Voltage (nominal): 48V    Capacity: 15Ah    Energy: 720Wh    Configuration: 13S3P    Internal resistance: <75 mOhm    Charging voltage: 54.6V    Final discharge voltage: 39V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Safety Fuse: 30A    Weight: approx.3.50 kg (without bracket)    Charging: 3-Pins Zenith    Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector) dimensions    Length: 368 mm     Width: 95 mm    Height: 103 mm

ENERpower soft pack battery 48V | Format 13S3P | Energy 720 Wh | Capacity 15 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50TImportant general informationThis 48V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a Round Plug DCunloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 40 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 1000 watts of power that work in 48V (13S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 300 charge cycles    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: LG Chem INR21700-M50T    Voltage (nominal): 48V    Capacity: 15Ah    Energy: 720Wh    Configuration: 13S3P    Internal resistance: <75 mOhm    Charging voltage: 54.6V    Final discharge voltage: 39V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Safety Fuse: 30A    Weight: approx.3.50 kg (without bracket)    Charging: DC    Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector) dimensions    Length: 368 mm     Width: 95 mm    Height: 103 mm

ENERpower Megiddo battery 48V for the Frame | Format 13S4P | Energy 770 Wh - 960Wh | Capacity 16 Ah - 20 Ah | for pedelecs, eBikes DIY | with Samsung INR21700-40T / INR21700-50E.Important general informationThis 48V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm),unloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 52 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 300 charge cycles    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: Samsung SDI INR21700-40T / INR21700-50E    Voltage (nominal): 48V    Capacity: 16Ah - 20Ah    Energy: 770Wh - 960Wh    Configuration: 13S4P    Internal resistance: <75 mOhm    Charging voltage: 54.6V    Final discharge voltage: 39V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Safety Fuse: 30A    Weight: approx.4.30 kg (without bracket)    Charging: DC round plug 5.5 mm / 2.5 mm    Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)dimensions    Length: 368 mm    Width: 95 mm    Height: 122 mm

ENERpower Bike-Frame-Battery Li-Ion Hailong Reention Jaffa DIY 48V (13S) from own manufacturing with 24.15Ah (INR18650-MJ1) For motors from 250 Watts and up to 750 Watts This 48V battery in the Hailong Reention Babylon case, which we assemble , can be mounted on the frame or on the luggage carrier of the bike. The batteries are manufactured in cell holders made of plastic. Charging is made possible with a DC circular connector (5.5 mm / 2.5 mm), discharging via the bracket (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This case can hold up to 91 18650 battery cells. With a BMS that can withstand 20A-22A continuous load, this battery is suitable for motors with up to 960 watts of power, working in 48V (13S) systems.The battery holder is very small and therefore we implement the Fuse inside the Discharge Cable The On/Off button enable the user the turn the battery on and off as an additional feature. Highlights High quality assembly – Made in Germany Assembly Just-In-Time BMS with an integrated passive balancer BMS with protection against overcharge, over-discharge, deep-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 500 charging cycles, still maintaines about 70% of the original capacity No memory effect – charge your battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Details Li-Ion-cell:  LG Chem INR18650-MJ1 Voltage (nominal): 48V (13S) Capacity: 24.15Ah Power: 1160Wh Configuration: 13S7P Internal resistance: < 75 mOhm Charge Voltage: 54,6V End-of-discharge Voltage: 30V BMS continueous discharge current: 22A BMS 10 Min. discharge current: 25A BMS 5 Sec. discharge current: 30A Safety fuse: 30A Weight: approx. 4.95 Kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharging: Cable with fuse 30A with XT60

ENERpower Akkon Li-Ion battery 48V | Format 13S4P | Energy 615Wh | Capacity 12.80Ah | for pedelecs, eBikes DIY | Important general informationThis 48V battery in the Hailong Akkon housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm),unloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 52 18650 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 1000 watts of power that work in 48V (13S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 300 charge cycles    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: LG Chem INR18650-MH1    Voltage (nominal): 48V    Capacity: 12.8Ah    Energy: 615Wh    Configuration: 13S4P    Internal resistance: <75 mOhm    Charging voltage: 54.6V    Final discharge voltage: 39V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Safety Fuse: 30A    Weight: approx.3.50 kg (without bracket)    Charging: DC round plug 5.5 mm / 2.5 mm    Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)dimensions    Length: 368 mm    Width: 90 mm    Height: 96 mm

ENERpower HaiLong Masada Frame Battery Li-Ion 48V  12.80Ah for Pedelecs & eBikes DIY Conversion Kit. For motors from 250 Watts and up to 950 Watts Important general information The 48V batteries in Hailong Masada case, which we assemble, are so-called “Frame Batteries”, which can be fixed to the bike’s frame. The batteries are assembled with plastic cell-holders. Charging is enabled using a DC round plug (5.5 mm / 2.1 mm) and discharging is done with a discharge cable with an XT90 plug. The Hailong Masada is the most compact case of its kind with space for 52 18650, oder 30 21700 Li-ion cells and suitable especially for users, which are looking to save space on the bikes. The battery is placed in a case which can be easily mounted on the frame of the bike. The BMS (Battery Management System) can somewhat withstand a constant current (22A). Hence this battery is suitable also for motors with up tp 750W. This case has also an ON-Off-Switch and has special silicon insultion to protect it from water. So you can choose not only the connector itself, but also the right charger. The difference between the chargers is due to the different output currents (charging speed). Highlights High-quality manufacturing – made in Germany Assembly just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring) directly from the manufacturer Rechargeable – After 300 charging cycles maintains 80% of the original capacity No memory effect – charge the battery whenever you want Weight: About 2.85 kg. Environmentally friendly according to EU Directive 2002/95/EC (RoHS) Technical data Li-ion cell: LG Chem INR18650-MH1 Voltage (nominal): 48V (13S) Capacity: 12.80Ah Power: About 615Wh Configuration: 13S4P Internal resistance: < 75 mOhm Charge Voltage: 54.6V End-of-Discharge Voltage: 39V Maximum charging: 5A Continuous Discharge Current: 20A = 950 watts 10 Min. Discharge current: 25A = 1280 Watts 5 Seconds Discharge Current: 30A = 1440 Watts Dimensions Length: About 425 mm Width: 90 mm Height: 105 mm Scope of Delivery Akku 48V 12.80Ah Halterung 2 Schlüssel

ENERpower Frame Battery Li-Ion Hailong PLUS DIY 48V from own manufacturing 16Ah (765Wh) with LG Chem INR18650-MH1 For motors up to 950 Watt Important General Information This 48V battery in the Hailong PLUS case, which we manufacture, can be mounted on the frame or on the luggage carrier of the bike. The batteries are manufactured in cell holders made of plastic. Charging is made possible with a DC circular connector (5.5 mm / 2.5 mm), discharging via the bracket (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This case can hold up to 65 18650 battery cells. With a BMS that can withstand 20A-22A continuous load, this battery is suitable for motors with up to 1000 watts of power, working in 48V (13S) systems.The battery holder is identical to the Hailong Pro holder (52-cell case). So you can use the holder for the 2 different cases.So you can choose not only the connector itself, but also the right charger. The difference in the chargers is due to the different output currents (charging speed). Highlights High-quality manufacturing – made in Germany Assembly just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring) directly from the manufacturer Rechargeable – After 300 charging cycles maintains 80% of the original capacity No memory effect – charge the battery whenever you want Environmentally friendly according to EU Directive 2002/95/EC (RoHS) Technical data Li-Ion Cell: LG Chem INR18650-MH1 Voltage (nominal): 48V Capacity: 16Ah Power: 765Wh Configuration: 13S5P Internal resistance: < 75 mOhm Charging voltage: 54.6V End-of-Discharge Voltage: 39V BMS Continuous Discharge Current: 22A BMS 10 Min. Discharge Current: 25A BMS 5 Seconds Discharge Current: 30A Safety Fuse: 30A Weight: approx. 3.65 kg. Charge: DC round plug 5.5 mm/2.5 mm Discharge: Cable with 30A fuse with XT90 power connector

ENERpower Bike-Frame Battery Li-ion Hailong PRO DIY 48V from own production 12.8Ah (615WH) with LG Chem INR18650-MH1 For motors up to 950 Watt Important General Information This 48V battery in the Hailong Pro case, that we manufacture, can be mounted on the bike’s frame, or on the rear carrier. The batteries are manufactured in plastic cell holders. The charging is made possible with a DC round plug (5.5 mm/2.5 mm), the discharge is carried out via the holder (separable from the battery) with XT90 connection piece. This case can accommodate up to 52 battery cells of type 18650. With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 950W working in 48V systems. The battery holder is identical to the Hailong Plus holder (case with space for 65 battery cells). So you can use the bracket for the 2 different housings. Highlights High-quality manufacturing – made in Germany Assembly just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring) directly from the manufacturer Rechargeable – After 300 charging cycles maintains 80% of the original capacity No memory effect – charge the battery whenever you want Environmentally friendly according to EU Directive 2002/95/EC (RoHS) Technical Data Li-ion Cell: LG Chem INR18650-MH1 Voltage (nominal): 48V Capacity: 12.80Ah Energy: 615Wh Configuration: 13S4P Internal resistance: < 75 mOhm Charging voltage: 54.6V End-of-Discharge Voltage: 39V BMS Continuous Discharge Current: 22A BMS 10 Min. Discharge Current: 25A BMS 5 Seconds Discharge Current: 30A Safety Fuse: 30A Weight: approx. 2.95 kg. Charge: DC round plug 5.5 mm/2.5 mm Discharge: Cable with 30A fuse with XT90 power connector Scope of Delivery 1 x battery Hailong PRO 48V 12.8Ah 1 x holder with XT90 discharge cable Rubber plates 2 x keys

ENERpower Bike-Frame Battery Li-ion Hailong PRO DIY 48V from own production 13.8Ah (660WH) with LG Chem INR18650-MJ1 For motors up to 950 Watt Important General Information This 48V battery in the Hailong Pro case, that we manufacture, can be mounted on the bike’s frame, or on the rear carrier. The batteries are manufactured in plastic cell holders. The charging is made possible with a DC round plug (5.5 mm/2.5 mm), the discharge is carried out via the holder (separable from the battery) with XT90 connection piece. This case can accommodate up to 52 battery cells of type 18650. With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 950W working in 48V systems. The battery holder is identical to the Hailong Plus holder (case with space for 65 battery cells). So you can use the bracket for the 2 different housings. Highlights High-quality manufacturing – made in Germany Assembly just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring) directly from the manufacturer Rechargeable – After 300 charging cycles maintains 80% of the original capacity No memory effect – charge the battery whenever you want Environmentally friendly according to EU Directive 2002/95/EC (RoHS) Technical Data Li-ion Cell: LG Chem INR18650-MJ1 Voltage (nominal): 48V Capacity: 13.80Ah Energy: 660Wh Configuration: 13S4P Internal resistance: < 75 mOhm Charging voltage: 54.6V End-of-Discharge Voltage: 39V BMS Continuous Discharge Current: 22A BMS 10 Min. Discharge Current: 25A BMS 5 Seconds Discharge Current: 30A Safety Fuse: 30A Weight: approx. 2.95 kg. Charge: DC round plug 5.5 mm/2.5 mm Discharge: Cable with 30A fuse with XT90 power connector Scope of Delivery 1 x battery Hailong PRO 48V 13.8Ah 1 x holder with XT90 discharge cable Rubber plates 2 x keys Optional (surcharge): 1 x battery charger 2A or 3A or 5A