ENERpower Bike-Frame-Battery Li-Ion Hailong Reention Babylon DIY 36V (37V) from own   assembly in Berlin with LG INR18650-MH1 (28.8Ah) This Hailong Reention from Type Babylon case is a case to be mounted on the bike’s frame. The case comes with plastic cell brackets (cavity) with space for 91 18650 Li-ion battery cells. Charging is via a DC jack (round plug). The LED display is suitable for 10S batteries. Highlights High quality assembly – Made in Germany Assembly Just-In-Time BMS with an integrated passive balancer BMS with protection against overcharge, over-discharge, deep-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 800 charging cycles, still maintaines about 70% of the original capacity No memory effect – charge your battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Can be used on following 36V Motors: 250 Watt / 350 Watt / 500 Watt / 750 Watt Technical Details Li-Ion-cell:  LG Chem INR18650-MH1 Voltage (nominal): 36V (37V) Capacity: 28.8Ah Power: 1050Wh Configuration: 10S9P Internal resistance: < 75 mOhm Charge Voltage: 42V End-of-discharge Voltage: 30V BMS continueous discharge current: 20A BMS 5 Sec. discharge current: 30A Safety fuse: 30A Weight: approx. 5.45 Kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharging: XT-60 / XT-90 / Anderson

ENERpower Bike-Frame-Battery Li-Ion Hailong Reention Babylon DIY 36V (37V) from own   assembly in Berlin with LG INR18650-MJ1 (31Ah) This Hailong Reention from Type Babylon case is a case to be mounted on the bike’s frame. The case comes with plastic cell brackets (cavity) with space for 91 18650 Li-ion battery cells. Charging is via a DC jack (round plug). The LED display is suitable for 10S batteries. Highlights High quality assembly – Made in Germany Assembly Just-In-Time BMS with an integrated passive balancer BMS with protection against overcharge, over-discharge, deep-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 800 charging cycles, still maintaines about 70% of the original capacity No memory effect – charge your battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Can be used on following 36V Motors: 250 Watt / 350 Watt / 500 Watt / 750 Watt Technical Details Li-Ion-cell:  LG Chem INR18650-MJ1 Voltage (nominal): 36V (37V) Capacity: 31Ah Power: 1150Wh Configuration: 10S9P Internal resistance: < 75 mOhm Charge Voltage: 42V End-of-discharge Voltage: 30V BMS continueous discharge current: 20A BMS 5 Sec. discharge current: 30A Safety fuse: 30A Weight: approx. 5.45 Kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharging: XT-60 / XT-90 / Anderson

ENERpower frame battery Li-Ion Hailong Akkon DP-5C DIY 36V (37V) from our own assembly line with 16Ah (580Wh) For motors from 250 watts to 750 wattsImportant general informationThis 36V battery in the Hailong Akkon DP-5C housing, which we assemble, can be mounted on the frame or on the luggage rack. The batteries are assembled in Berlin in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90, XT60, or Anderson connector. Up to 52 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.This battery has a charge level indicator and an on / off switch Highlights High quality assembly - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 500 charging cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR18650-MH1 Voltage (nominal): 36V (37V) Capacity: 16Ah Configuration: 10S5P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.2.75 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: XT-60, XT-90, Anderson PowerPoleDimensions (with bracket)Length: approx. 368 mmWidth: 90 mmHeight: 96 mm

ENERpower Hebron battery 36V for the Frame | Format 10S7P | Energy 1260Wh | Capacity  35 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50T.Important general informationThis 36V battery in the Hailong Hebron housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a Zenith 3-Pins Charging socketunloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 70 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 500 charge cycles (according to LG Chem battery specification)    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: LG Chem INR21700-M50T    Voltage (nominal): 36V    Capacity: 35Ah    Energy: 1260Wh    Configuration: 10S7P    Internal resistance: <75 mOhm    Charging voltage: 42V    Final discharge voltage: 30V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Safety Fuse: 30A    Weight: approx. 5.20 kg (without bracket)    Charging: Zenith 3-Pins Charging socket    Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)dimensions    Length: 368 mm    Width: 95 mm    Height: 156 mm

ENERpower soft pack battery 36V | Format 10S4P | Energy 580Wh / 720 Wh | Capacity 16Ah / 20 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700 M50T, Molicel P42AImportant general informationThis 36V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm),unloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 40 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 300 charge cycles    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: Molicel P42A / LG Chem INR21700 M50T    Voltage (nominal): 36V    Capacity: 20Ah    Energy: 720Wh    Configuration: 10S4P    Internal resistance: <75 mOhm    Charging voltage: 42V    Final discharge voltage: 30V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Safety Fuse: 30A    Weight: approx.3.50 kg (without bracket)    Charging: Zenith 3-Pins    Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector) dimensions    Length: 368 mm     Width: 95 mm    Height: 103 mm

ENERpower Frame battery LOD battery 36V | Format 10S4P | Energy 720 Wh | Capacity 20 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50TImportant general informationThis 36V battery in the Hailong Lod housing, which we assemble , can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. The charging of the battery is done with a DC Round Plug 5.5 x 2.1 mmDischarging of the battery takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 40 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, that is located in the front.So you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 500 charge cycles    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: Samsung SDI INR21700-50E    Voltage (nominal): 36V    Capacity: 20Ah    Energy: 720Wh    Configuration: 10S4P    Internal resistance: <75 mOhm    Charging voltage: 42V    Final discharge voltage: 30V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Safety Fuse: 30A    Weight: approx.3.50 kg (without bracket)    Charging: DC 5.5 x 2.1 mm    Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector) dimensions    Length: 320 mm     Width: 88.5 mm    Height: 117 mm

ENERpower Megiddo battery 36V for the Frame | Format 10S5P | Energy 720 Wh - 900Wh | Capacity 20 Ah - 25 Ah | for pedelecs, eBikes DIY | with Samsung INR21700-40T / INR21700-50EImportant general informationThis 36V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a Zenith IP67 Connector. We have an adapter from XLR-3 to Zenith connector, so all youneed is a charger with XLR3 connectorunloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 52 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 300 charge cycles    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: Samsung SDI INR21700-40T / INR21700-50E    Voltage (nominal): 36V    Capacity: 20Ah - 25Ah    Energy: 720Wh - 900Wh    Configuration: 10S5P    Internal resistance: <75 mOhm    Charging voltage: 42V    Final discharge voltage: 30V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Safety Fuse: 30A    Weight: approx.4.20 kg (without bracket)    Charging: Zenith IP67    Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)dimensions    Length: 368 mm    Width: 95 mm    Height: 122 mm

ENERpower Megiddo battery 36V for the Frame | Format 10S5P | Energy 900Wh | Capacity  25 Ah | for pedelecs, eBikes DIY | with Samsung INR21700-50E.Important general informationThis 36V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm),unloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 52 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 300 charge cycles    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: Samsung SDI  INR21700-50E    Voltage (nominal): 36V    Capacity: 25Ah    Energy: 900Wh    Configuration: 10S5P    Internal resistance: <75 mOhm    Charging voltage: 42V    Final discharge voltage: 30V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Safety Fuse: 30A    Weight: approx.4.20 kg (without bracket)    Charging: DC round plug 5.5 mm / 2.5 mm    Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)dimensions    Length: 368 mm    Width: 95 mm    Height: 122 mm

ENERpower HaiLong Masada Frame Battery Li-Ion 36V  15Ah for Pedelecs & eBikes DIY Conversion Kit. For motors from 250 Watts and up to 750 Watts Important general information The 36V batteries in Hailong Masada case, which we assemble, are so-called “Frame Batteries”, which can be fixed to the bike’s frame. The batteries are assembled with plastic cell-holders. Charging is enabled using a DC round plug (5.5 mm / 2.1 mm) and discharging is done with a discharge cable with an XT90 plug. The Hailong Masada is the most compact case of its kind with space for 50 18650, oder 30 21700 Li-ion cells and suitable especially for users, which are looking to save space on the bikes. The battery is placed in a case which can be easily mounted on the frame of the bike. The BMS (Battery Management System) can somewhat withstand a constant current (22A). Hence this battery is suitable also for motors with up tp 750W. This case has also an ON-Off-Switch and has special silicon insultion to protect it from water. So you can choose not only the connector itself, but also the right charger. The difference between the chargers is due to the different output currents (charging speed). Highlights High-quality manufacturing – made in Germany Assembly just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring) directly from the manufacturer Rechargeable – After 300 charging cycles maintains 80% of the original capacity No memory effect – charge the battery whenever you want Weight: About 2.85 kg. Environmentally friendly according to EU Directive 2002/95/EC (RoHS) Technical data Li-ion cell: LG Chem INR21700-M50T Voltage (nominal): 36V (37V) Capacity: 15Ah Power: About 540Wh Configuration: 10S3P Internal resistance: < 75 mOhm Charge Voltage: 42V End-of-Discharge Voltage: 30V Maximum charging: 5A Continuous Discharge Current: 20A = 720 watts 10 Min. Discharge current: 25A = 900 Watts 5 Seconds Discharge Current: 35A = 1260 Watts Dimensions Length: About 425 mm Width: 90 mm Height: 105 mm Scope of Delivery Akku 36V 8,8Ah Halterung 2 Schlüssel

ENERpower frame battery Li-Ion Hailong PLUS DIY 36V (37V) from our own assembly in Berlin with INR18650-MH1 For motors from 250 watts to 750 wattsImportant general informationThis 36V battery in the Hailong PLUS housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm), discharging takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. Up to 65 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.The battery holder is identical to the Hailong Pro holder (housing with space for 52 battery cells). So you can use the bracket for the 2 different housings.So you can not only choose the connector yourself, but also the right charger.The difference in the chargers lies in the different output currents (charging speed). Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell:  LG Chem INR18650-MH1 Voltage (nominal): 36V (37V) Capacity: 19.20Ah Energy: 695Wh Configuration: 10S6P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.3.35 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: XT-60, XT-90, Anderson PowerPole

ENERpower frame battery Li-Ion Hailong PLUS DIY 36V (37V) from our own assembly in Berlin with INR18650-MJ1 For motors from 250 watts to 750 wattsImportant general informationThis 36V battery in the Hailong PLUS housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm), discharging takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. Up to 65 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.The battery holder is identical to the Hailong Pro holder (housing with space for 52 battery cells). So you can use the bracket for the 2 different housings.So you can not only choose the connector yourself, but also the right charger.The difference in the chargers lies in the different output currents (charging speed). Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell:  LG Chem INR18650-MJ1 Voltage (nominal): 36V (37V) Capacity: 21Ah Energy: 760Wh Configuration: 10S6P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.3.35 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: XT-60, XT-90, Anderson PowerPole

ENERpower frame battery Li-Ion Hailong Pro DIY 36V (37V) from our own assembly line in Berlin with LG Chem INR18650-MH1 For motors from 250 watts to 750 wattsImportant general informationThis 36V battery in the Hailong Pro housing, which we assemble in Berlin, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm), discharging takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (Discharge) connector. Up to 52 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.The battery holder is identical to the Hailong Plus holder (housing with space for 65 battery cells). So you can use the holder for the 2 different housings.So you can not only choose the connector yourself, but also the right charger.The difference in the chargers lies in the different output currents (charging speed). Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR18650-MH1 Voltage (nominal): 36V (37V) Capacity: 16Ah Energy: 580Wh Configuration: 10S5P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.2.75 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: XT-60 / XT-90 / Anderson PowerPoleDimensions (with bracket) Length: approx. 370 mm Width: 90 mm Height: 85-90 mm

ENERpower frame battery Li-Ion Hailong Pro DIY 36V (37V) from our own assembly line in Berlin with LG Chem INR18650-MJ1 For motors from 250 watts to 750 wattsImportant general informationThis 36V battery in the Hailong Pro housing, which we assemble in Berlin, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm), discharging takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (Discharge) connector. Up to 52 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.The battery holder is identical to the Hailong Plus holder (housing with space for 65 battery cells). So you can use the holder for the 2 different housings.So you can not only choose the connector yourself, but also the right charger.The difference in the chargers lies in the different output currents (charging speed). Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR18650-MJ1 Voltage (nominal): 36V (37V) Capacity: 17.25Ah Energy: 625Wh Configuration: 10S5P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.2.75 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: XT-60 / XT-90 / Anderson PowerPoleDimensions (with bracket) Length: approx. 370 mm Width: 90 mm Height: 85-90 mm