ENERpower Bike-Frame Battery Li-ion Hailong PRO DIY 48V from own production 12.8Ah (615WH) with LG Chem INR18650-MH1
For motors up to 950 Watt
Important General Information
This 48V battery in the Hailong Pro case, that we manufacture, can be mounted on the bike’s frame, or on the rear carrier. The batteries are manufactured in plastic cell holders. The charging is made possible with a DC round plug (5.5 mm/2.5 mm), the discharge is carried out via the holder (separable from the battery) with XT90 connection piece. This case can accommodate up to 52 battery cells of type 18650.
With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 950W working in 48V systems.
The battery holder is identical to the Hailong Plus holder (case with space for 65 battery cells). So you can use the bracket for the 2 different housings.
Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical Data
Li-ion Cell: LG Chem INR18650-MH1
Voltage (nominal): 48V
Capacity: 12.80Ah
Energy: 615Wh
Configuration: 13S4P
Internal resistance: < 75 mOhm
Charging voltage: 54.6V
End-of-Discharge Voltage: 39V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 2.95 kg.
Charge: DC round plug 5.5 mm/2.5 mm
Discharge: Cable with 30A fuse with XT90 power connector
Scope of Delivery
1 x battery Hailong PRO 48V 12.8Ah
1 x holder with XT90 discharge cable
Rubber plates
2 x keys
ENERpower Bike-Frame Battery Li-ion Hailong PRO DIY 48V from own production 13.8Ah (660WH) with Samsung SDI INR18650-35E
For motors up to 950 Watt
Important General Information
This 48V battery in the Hailong Pro case, that we manufacture, can be mounted on the bike’s frame, or on the rear carrier. The batteries are manufactured in plastic cell holders. The charging is made possible with a DC round plug (5.5 mm/2.5 mm), the discharge is carried out via the holder (separable from the battery) with XT90 connection piece. This case can accommodate up to 52 battery cells of type 18650.
With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 950W working in 48V systems.
The battery holder is identical to the Hailong Plus holder (case with space for 65 battery cells). So you can use the bracket for the 2 different housings.
Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
Samsung SDI INR18650-35E Li-Ion cells–>up to 8A continuous load per parallel circuit
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical Data
Li-ion Cell: Samsung SDI INR18650-35E
Voltage (nominal): 48V
Capacity: 13.80Ah
Energy: 660Wh
Configuration: 13S4P
Internal resistance: < 75 mOhm
Charging voltage: 54.6V
End-of-Discharge Voltage: 39V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 2.95 kg.
Charge: DC round plug 5.5 mm/2.5 mm
Discharge: Cable with 30A fuse with XT90 power connector
Scope of Delivery
1 x battery Hailong PRO 48V 13.8Ah
1 x holder with XT90 discharge cable
Rubber plates
2 x keys
Optional (surcharge): 1 x battery charger 2A or 3A or 5A
ENERpower Bike-Frame Battery Li-ion Hailong PRO DIY 48V from own production 13.8Ah (660WH) with Samsung SDI INR18650-35E
Important General Information
This battery was used for the older model UDX. The bracket, as seen in the picture, has 5 pins. The assignment of plus and minus on the contacts is identical to this model and the battery can replace the old one without any adjustments.
Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
Samsung SDI INR18650-35E Li-Ion cells–>up to 8A continuous load per parallel circuit
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical Data
Li-ion Cell: Samsung SDI INR18650-35E
Voltage (nominal): 48V
Capacity: 13.80Ah
Energy: 660Wh
Configuration: 13S4P
Internal resistance: < 75 mOhm
Charging voltage: 54.6V
End-of-Discharge Voltage: 39V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 2.95 kg.
Charge: DC round plug 5.5 mm/2.5 mm
Discharge: Cable with 30A fuse with XT90 power connector
Scope of Delivery
1 x battery Hailong PRO 48V 13.8Ah
1 x holder with XT90 discharge cable
Rubber plates
2 x keys
Optional (surcharge): 1 x battery charger 2A or 3A or 5A
ENERpower Bike-Frame Battery Li-ion Hailong PRO DIY 48V from own production 13.8Ah (660WH) with LG Chem INR18650-MJ1
For motors up to 950 Watt
Important General Information
This 48V battery in the Hailong Pro case, that we manufacture, can be mounted on the bike’s frame, or on the rear carrier. The batteries are manufactured in plastic cell holders. The charging is made possible with a DC round plug (5.5 mm/2.5 mm), the discharge is carried out via the holder (separable from the battery) with XT90 connection piece. This case can accommodate up to 52 battery cells of type 18650.
With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 950W working in 48V systems.
The battery holder is identical to the Hailong Plus holder (case with space for 65 battery cells). So you can use the bracket for the 2 different housings.
Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical Data
Li-ion Cell: LG Chem INR18650-MJ1
Voltage (nominal): 48V
Capacity: 13.80Ah
Energy: 660Wh
Configuration: 13S4P
Internal resistance: < 75 mOhm
Charging voltage: 54.6V
End-of-Discharge Voltage: 39V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 2.95 kg.
Charge: DC round plug 5.5 mm/2.5 mm
Discharge: Cable with 30A fuse with XT90 power connector
Scope of Delivery
1 x battery Hailong PRO 48V 13.8Ah
1 x holder with XT90 discharge cable
Rubber plates
2 x keys
Optional (surcharge): 1 x battery charger 2A or 3A or 5A
Modiary MDA254 fast charger CCCV 125W (42V / 3A charging current) for 36V eBike batteries from BionX and replaces KTM HP8204L3
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
125W output power (up to 3A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2A (Max.)
Output
42V DC 3A
Connector: XLR-4-Pins
Safety Measures
Over current protection: < 3.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with BionX 36V batteries with XLR-4 and replaces the Charger KTM HP8204L3
Modiary MDA254 Fast Charger CCCV 170W (42V / 4A Charging Current) for electric scooter Lidl Doc Green ESA 1900Highligths Overcurrent, short circuit and reverse polarity protection Safety standards: UL1310, EN60335 GS (tested safety) and UL approved Protection class: IP20 CCCV - Constant current - Constant voltage - so you charge Li-ion 170W output power (up to 4A + 10% output current) Simple and safe handling (plug-and-play) High quality and long life LED indicator (red / green)Technical specificationsInput: Voltage: AC 100-264V Input current: 3A (Max.)Output: 42V DC 4ASafety: Overcurrent protection: <4.3A Short-circuit protection: constant Reverse polarity protectionConformity: IEC 61558-1: 2005 IEC 61558-: 2005 / AMD1: 2009 IEC 61558-2-16: 2009 IEC 61558-2-16: 2009 / AMD1: 2013Compatible with Lidl Doc Green E-Scooter ESA 5000 NOT compatible with: Segway miniPROcharging timeBattery with 10Ah = about 2.5 hours
Modiary MDA254 Fast Charger CCCV 170W (42V / 4A Charging Current) for electric scooter Lidl Doc Green ESA 5000Highligths Overcurrent, short circuit and reverse polarity protection Safety standards: UL1310, EN60335 GS (tested safety) and UL approved Protection class: IP20 CCCV - Constant current - Constant voltage - so you charge Li-ion 170W output power (up to 4A + 10% output current) Simple and safe handling (plug-and-play) High quality and long life LED indicator (red / green)Technical specificationsInput: Voltage: AC 100-264V Input current: 3A (Max.)Output: 42V DC 4ASafety: Overcurrent protection: <4.3A Short-circuit protection: constant Reverse polarity protectionConformity: IEC 61558-1: 2005 IEC 61558-: 2005 / AMD1: 2009 IEC 61558-2-16: 2009 IEC 61558-2-16: 2009 / AMD1: 2013Compatible with Lidl Doc Green E-Scooter ESA 5000 NOT compatible with: Segway miniPROcharging timeBattery with 10Ah = about 2.5 hours
Modiary MDA291 fast charger CCCV 170W (42V / 4A charging current) for 36V eBike batteries from BionX and replaces KTM HP8204L3
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
170W output power (up to 4A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2.5A (Max.)
Output
42V DC 3A
Connector: XLR-4-Pins
Safety Measures
Over current protection: < 4.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with BionX 36V batteries with XLR-4 and replaces the Charger KTM HP8204L3
Enerpower fast charger CCCV 170W (42V / 4A charging current) for 36V eBike batteries from Decathlon E-ST 100 / 500 / 900, Riverside 500 E & Elops 900 / 920
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
170W output power (up to 4A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2.5A (Max.)
Output
42V DC 4A
Connector: XLR-4-Pins
Safety Measures
Over current protection: < 4.4A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with following types of Decathlon::
E-ST 100
E-ST 500
E-ST 900
Riverside 500 E
Elops 900
Elops 920
Modiary MDA254 fast charger CCCV 170W (42V / 4A charging current) for 36V eBike batteries from TranzX
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
170W output power (up to 4A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2.5A (Max.)
Output
42V DC 4A
Connector: XLR-5-Pins
Safety Measures
Over current protection: < 4.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with TranzX eBikes mit Akku BL03 und BL07
Charging Time
Battery with 10Ah = about 2.5 hours
Battery with 15Ah = about 4 hours
Battery with 18Ah = about 5 hours
Modiary MDA254 fast charger CCCV 180W (42V / 4A charging current) for 36V eBike batteries from Victoria
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
125W output power (up to 2A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2.5A (Max.)
Output
42V DC 4A
Connector: XLR-5-Pins
Safety Measures
Over current protection: < 4.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with Victoria eBikes
Victoria St.Moritz
Victoria Niederrhein
Victoria Schönau
Victoria Cremona
Victoria St. Vincent
Victoria e Urban 5.1
Victoria e Urban 5.7
Victoria e Urban 5.8
Victoria Emden
Victoria Lucca
Victoria snap it
Charging Time
Battery with 10Ah = about 4 hours
Battery with 15Ah = about 5 hours
Battery with 18Ah = about 5.5 hours
Modify your own Kit
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2 250W Edition 2020 + Battery ENERpower nablus for the rack in 2 sizes (17.10Ah and 20.3Ah).
Display and Charger are to be added from the bundle offers (costs are in addition)
Further you can choose between a Freewheel Version, or a version with a coaster break
General Information
This kit includes a Tongsheng TSWZ2 36V motor kit with 250W output power along with a ENERpower rechargeable Li-ion rack battery Nablus in 36V, Display and a charger (that you have to choose)
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 36V / 48V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
42T
Display
Type: VLCD5, VLCD6, XH-18, TFT500S-U, TFT560C
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Powered by Samsung INR18650-35E li-ion battery cells
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
General Information
Manufacturer: ENERpower (Germany)
Type: Softpack battery in bag
Li-ion battery cell: Samsung INR18650-35E (20.3Ah) / Samsung INR18650-29E (17.1Ah)
Voltage (nominal): 36V (37V)
Charging voltage: 42V
Modify your own Kit
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2 250W Edition 2020 + Display (2 types to choose from)+ Battery ENERpower Gath for the rack in 2 sizes (11,60Ah and 13.80Ah).
Suitable Charger and Display must be chosen with additional costs from our different offers.
General Information
This kit includes a Tongsheng TSWZ2 48V motor kit with 250W output power along with a ENERpower rechargeable Li-ion rack battery Gath in 48V, Display and a charger.
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine have a back pedal function (Coaster Break)The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 36V / 48V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
42T
Coaster Break
Display
Type: VLCD5, or XH-18
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Powered by Samsung SDI
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
General Information
Manufacturer: ENERpower (Germany)
Type: Gath Rack battery
Li-ion battery cell: Samsung INR18650-35E (13.80Ah) / Samsung INR18650-29E (11.60Ah)
Voltage (nominal): 48V (13S)
Charging voltage: 54.6V
With State of Charge indicator
With Taillight
Modify your own Kit
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2 250W Edition 2020 + Display (2 types to choose from)+ Battery ENERpower nablus for the rack in 2 sizes (11,60Ah and 13.80Ah) + Charger 2A, 3A, or 5A
General Information
This kit includes a Tongsheng TSWZ2 48V motor kit with 250W output power along with a ENERpower rechargeable Li-ion rack battery Nablus in 48V, Display and a charger.
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does have a back pedal function (Coaster Break)The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 36V / 48V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
42T
Display
Type: VLCD5, or XH-18
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Powered by Samsung SDI
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
General Information
Manufacturer: ENERpower (Germany)
Type: Rack Battery Nablus
Li-ion battery cell: Samsung INR18650-35E (13.80Ah) / Samsung INR18650-29E (11.60Ah)
Voltage (nominal): 48V (13S)
Charging voltage: 54.6V
Modify your own Kit
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2 250W Edition 2020 + Display (2 types to choose from)+ Battery ENERpower nablus for the rack in 2 sizes (11,60Ah and 13.80Ah)
Suitable Display and Chargers can bee added from our different Bundle offers
General Information
This kit includes a Tongsheng TSWZ2 48V motor kit with 250W output power along with a ENERpower rechargeable Li-ion rack battery Nablus in 48V, Display and a charger.
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 36V / 48V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
42T
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Powered by Samsung SDI
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
General Information
Manufacturer: ENERpower (Germany)
Type: Gath Rack battery
Li-ion battery cell: Samsung INR18650-35E (13.80Ah) / Samsung INR18650-29E (11.60Ah)
Voltage (nominal): 48V (13S)
Charging voltage: 54.6V
With State of Charge indicator
With Taillight
Modify your own Kit (additional costs)
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2 250W Edition 2020 + Display (3 types to choose from)+ Battery ENERpower nablus for the rack in 2 sizes (11,60Ah and 13.80Ah) + Charger 2A, 3A, or 5A to choose from as well as suitable 6-Pins displays
General Information
This kit includes a Tongsheng TSWZ2 48V motor kit with 250W output power along with a ENERpower rechargeable Li-ion rack battery Nablus in 48V, Display and a charger.
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 36V / 48V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
42T
Display
Type: VLCD5, VLCD7, or XH-18
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Powered by Samsung SDI
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
General Information
Manufacturer: ENERpower (Germany)
Type: Softpack battery in bag
Li-ion battery cell: Samsung INR18650-35E (13.80Ah) / Samsung INR18650-29E (11.60Ah)
Voltage (nominal): 48V (13S)
Charging voltage: 54.6V
General information
This set includes a motor kit from Tongsheng of the type TSDZ2B 36V with 250W output power together with a softpack battery from ENERpower with 10Ah (10S2P) in a frame bag
We assemble the battery in a special format (cell holder) so that it fits into the frame bag.
If you have a back-pedal bike - choose the back-pedal motor.
A free-wheeling bike (no pedal brake) must be selected with a free-wheeling motor
Tongsheng motors are known for being easy and straightforward to assemble. The controller is already integrated in the motor and all necessary accessories such as cables, speed sensors and lighting cables are included in the kit.
This motor complies with the requirements of the StVO and does not need to be approved. The maximum speed of 25 km / h is preset. The TSDZ2B has an integrated torque sensor and regulates the amount of support. The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: shell width 67 mm to 69 mm, inner diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most frequently installed BSA bottom brackets.
In this offer you have the option of choosing a suitable charger and display from the bundle offers for an additional Fee.
Technical documentation for all components can be found here
Technical specifications Motor
• Manufacturer: Tongsheng (China)
• Model: TSDZ2
• Engine type: mid-engine
• Wheel diameter: 16 '- 28'
• Power: 250W - 350W
• Voltage: 36V or 48V
• Torque: 50N.m - 80N.m
• Degree of support: 36% ~ 300%
• Maximum speed: 25Km / h
• Weight: 3.3 kg.
Battery highlights
• High quality production - Made in Germany
• Just-in-time assembly
• BMS with an integrated passive balancer and protection against overcharging, deep discharge, and overdischarge (temperature monitoring)
• Direct from the manufacturer
• Rechargeable - Still 80% of original capacity after 300 charge cycles
• No memory effect - charge the battery whenever you want
• Environmentally friendly according to EU directive 2002/95 / EG (RoHS)
Battery technical data:
Battery cell: Samsung SDI INR21700-50E / LG Chem INR21700 50MT (subject to availability) Configuration: 10S2P
Nominal voltage: 36V (37V)
Capacity: 10Ah
Energy: 360Wh
BMS: analog BMS with 20A continuous load
Weight: approx. 1.65 kg.
Load: XLR-3
Discharge: XT-60
General information
This set includes a motor kit from Tongsheng of the type TSDZ2 36V with 250W output power together with a softpack battery from ENERpower with 15Ah (10S3P) in a frame bag
We assemble the battery in a special format (cell holder) so that it fits into the frame bag.
If you have a back-pedal bike - choose the back-pedal motor.
A free-wheeling bike (no pedal brake) must be selected with a free-wheeling motor
Tongsheng motors are known for being easy and straightforward to assemble. The controller is already integrated in the motor and all necessary accessories such as cables, speed sensors and lighting cables are included in the kit.
This motor complies with the requirements of the StVO and does not need to be approved. The maximum speed of 25 km / h is preset. The TSDZ2 has an integrated torque sensor and regulates the amount of support. The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: shell width 67 mm to 69 mm, inner diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most frequently installed BSA bottom brackets.
In this offer you have the option of choosing a suitable charger and display from the bundle offers for an additional Fee.
Technical documentation for all components can be found here
Technical specifications Motor
• Manufacturer: Tongsheng (China)
• Model: TSDZ2
• Engine type: mid-engine
• Wheel diameter: 16 '- 28'
• Power: 250W - 350W
• Voltage: 36V or 48V
• Torque: 50N.m - 80N.m
• Degree of support: 36% ~ 300%
• Maximum speed: 25Km / h
• Weight: 3.3 kg.
Battery highlights
• High quality production - Made in Germany
• Just-in-time assembly
• BMS with an integrated passive balancer and protection against overcharging, deep discharge, and overdischarge (temperature monitoring)
• Direct from the manufacturer
• Rechargeable - Still 80% of original capacity after 300 charge cycles
• No memory effect - charge the battery whenever you want
• Environmentally friendly according to EU directive 2002/95 / EG (RoHS)
Battery technical data:
Battery cell: Samsung SDI INR21700-50E / LG Chem INR21700 50MT (subject to availability) Configuration: 10S3P
Nominal voltage: 36V (37V)
Capacity: 15Ah
Energy: 540Wh
BMS: analog BMS with 20A continuous load
Weight: approx. 2.35 kg.
Load: XLR-3
Discharge: XT-60
General information
This set includes a motor kit from Tongsheng of the type TSDZ2B 36V with 250W output power together with a softpack battery from ENERpower with 20Ah (10S4P) in a frame bag
We assemble the battery in a special format (cell holder) so that it fits into the frame bag.
If you have a back-pedal bike - choose the back-pedal motor.
A free-wheeling bike (no pedal brake) must be selected with a free-wheeling motor
Tongsheng motors are known for being easy and straightforward to assemble. The controller is already integrated in the motor and all necessary accessories such as cables, speed sensors and lighting cables are included in the kit.
This motor complies with the requirements of the StVO and does not need to be approved. The maximum speed of 25 km / h is preset. The TSDZ2B has an integrated torque sensor and regulates the amount of support. The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: shell width 67 mm to 69 mm, inner diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most frequently installed BSA bottom brackets.
In this offer you have the option of choosing a suitable charger and display from the bundle offers for an additional Fee.
Technical documentation for all components can be found here
Technical specifications Motor
• Manufacturer: Tongsheng (China)
• Model: TSDZ2
• Engine type: mid-engine
• Wheel diameter: 16 '- 28'
• Power: 250W - 350W
• Voltage: 36V or 48V
• Torque: 50N.m - 80N.m
• Degree of support: 36% ~ 300%
• Maximum speed: 25Km / h
• Weight: 3.3 kg.
Battery highlights
• High quality production - Made in Germany
• Just-in-time assembly
• BMS with an integrated passive balancer and protection against overcharging, deep discharge, and overdischarge (temperature monitoring)
• Direct from the manufacturer
• Rechargeable - Still 80% of original capacity after 300 charge cycles
• No memory effect - charge the battery whenever you want
• Environmentally friendly according to EU directive 2002/95 / EG (RoHS)
Battery technical data:
Battery cell: Samsung SDI INR21700-50E / LG Chem INR21700 50MT (subject to availability) Configuration: 10S4P
Nominal voltage: 36V (37V)
Capacity: 20Ah
Energy: 720Wh
BMS: analog BMS with 20A continuous load
Weight: approx. 3.05 kg.
Load: XLR-3
Discharge: XT-60
General information
This set includes a motor kit from Tongsheng of the type TSDZ2 48V with 250W output power together with a softpack battery from ENERpower with 10Ah (13S2P) in a frame bag
We assemble the battery in a special format (cell holder) so that it fits into the frame bag.
If you have a back-pedal bike - choose the back-pedal motor.
A free-wheeling bike (no pedal brake) must be selected with a free-wheeling motor
Tongsheng motors are known for being easy and straightforward to assemble. The controller is already integrated in the motor and all necessary accessories such as cables, speed sensors and lighting cables are included in the kit.
This motor complies with the requirements of the StVO and does not need to be approved. The maximum speed of 25 km / h is preset. The TSDZ2 has an integrated torque sensor and regulates the amount of support. The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: shell width 67 mm to 69 mm, inner diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most frequently installed BSA bottom brackets.
In this offer you have the option of choosing a suitable charger and display from the bundle offers for an additional Fee.
Technical documentation for all components can be found here
Technical specifications Motor
• Manufacturer: Tongsheng (China)
• Model: TSDZ2
• Engine type: mid-engine
• Wheel diameter: 16 '- 28'
• Power: 250W - 350W
• Voltage: 36V or 48V
• Torque: 50N.m - 80N.m
• Degree of support: 36% ~ 300%
• Maximum speed: 25Km / h
• Weight: 3.3 kg.
Battery highlights
• High quality production - Made in Germany
• Just-in-time assembly
• BMS with an integrated passive balancer and protection against overcharging, deep discharge, and overdischarge (temperature monitoring)
• Direct from the manufacturer
• Rechargeable - Still 80% of original capacity after 300 charge cycles
• No memory effect - charge the battery whenever you want
• Environmentally friendly according to EU directive 2002/95 / EG (RoHS)
Battery technical data:
Battery cell: Samsung SDI INR21700-50E / LG Chem INR21700 50MT (subject to availability)
Configuration: 13S2P
Nominal voltage: 48V (13S)
Capacity: 10Ah
Energy: 480Wh
BMS: analog BMS with 20A continuous load
Weight: approx. 2.05 kg.
Load: XLR-3
Discharge: XT-60
€610.00*
We Have a New Website!
or
This website uses cookies to ensure the best experience possible. More information...