Fuyuang fast charger CCCV 125W (42V / 2A charging current) for 36V eBike batteries from Victoria
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
125W output power (up to 2A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2A (Max.)
Output
42V DC 2A
Connector: XLR-5-Pins
Safety Measures
Over current protection: < 2.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with Victoria eBikes
Victoria St.Moritz
Victoria Niederrhein
Victoria Schönau
Victoria Cremona
Victoria St. Vincent
Victoria e Urban 5.1
Victoria e Urban 5.7
Victoria e Urban 5.8
Victoria Emden
Victoria Lucca
Victoria snap it
Charging Time
Battery with 10Ah = about 5.5 hours
Battery with 15Ah = about 8 hours
Battery with 18Ah = about 9.5 hours
Fuyuang EP-FY4253000 fast charger CCCV 125W (42V / 3A charging current) for 36V eBike batteries from Ghost from manufacturing between 2010 - 2014 (compare in the list)
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
125W output power (up to 3A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2A (Max.)
Output
42V DC 3A
Connector: XLR-4-Pins
Safety Measures
Over current protection: < 3.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with following batteries (XLR-4):Ghost E HybridstraßeGhost E Hybrid Trail 4000Ghost E Hybrid Trail 9000
Fuyuang EP-FY4253000 fast charger CCCV 125W (42V / 3A charging current) for 36V eBike batteries from Hercules from manufacturing between 2011 - 2012 (compare in the list)
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
125W output power (up to 3A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2A (Max.)
Output
42V DC 3A
Connector: XLR-4-Pins
Safety Measures
Over current protection: < 3.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with following batteries (XLR-4):Hercules E-move sport lite 2012Hercules E-move sport pro 2012Hercules Emove tourer pro 2011Hercules Iphos pro 2010 – 2011
Fuyuang EP-FY4253000 fast charger CCCV 125W (42V / 3A charging current) for 36V eBike batteries from Koga from manufacturing between 2010 - 2014 (compare in the list)
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
125W output power (up to 3A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2A (Max.)
Output
42V DC 3A
Connector: XLR-4-Pins
Safety Measures
Over current protection: < 3.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with following batteries (XLR-4):Koga E-comfort 2011 – 2012Koga E-comfort lady 2011 – 2012Koga E-deluxe 2013Koga E-light 2010 – 2012Koga E-light lady 2010 – 2012Koga E-limited lady XT 2012Koga E-limited XT 2012 KogaE-runner 2011 – 2013 KogaE-runner lady 2011 – 2013Koga E-special 2013 – 2014Koga E-Xlight 2012Koga E-xtension 2012 – 2013Koga E-xtension lady 2012 – 2013
Fuyuang FY420300 fast charger CCCV 125W (42V / 3A charging current) for 36V eBike batteries from TranzX
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
125W output power (up to 3A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2A (Max.)
Output
42V DC 3A
Connector: XLR-5-Pins
Safety Measures
Over current protection: < 3.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with TranzX eBikes mit Akku BL03 und BL07
Charging Time
Battery with 10Ah = about 4 hours
Battery with 15Ah = about 5.5 hours
Battery with 18Ah = about 6.5 hours
Fuyuang fast charger CCCV 125W (42V / 3A charging current) for 36V eBike batteries from Victoria
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
125W output power (up to 2A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2A (Max.)
Output
42V DC 3A
Connector: XLR-5-Pins
Safety Measures
Over current protection: < 3.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with Victoria eBikes
Victoria St.Moritz
Victoria Niederrhein
Victoria Schönau
Victoria Cremona
Victoria St. Vincent
Victoria e Urban 5.1
Victoria e Urban 5.7
Victoria e Urban 5.8
Victoria Emden
Victoria Lucca
Victoria snap it
Charging Time
Battery with 10Ah = about 5.5 hours
Battery with 15Ah = about 8 hours
Battery with 18Ah = about 9.5 hours
Fuyuang fast charger CCCV 125W (42V / 3A charging current) for 36V eBike batteries from Victoria
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
125W output power (up to 2A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2A (Max.)
Output
42V DC 3A
Connector: XLR-5-Pins
Safety Measures
Over current protection: < 3.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with Victoria eBikes
Victoria St.Moritz
Victoria Niederrhein
Victoria Schönau
Victoria Cremona
Victoria St. Vincent
Victoria e Urban 5.1
Victoria e Urban 5.7
Victoria e Urban 5.8
Victoria Emden
Victoria Lucca
Victoria snap it
High quality charger from Fuyuang for 48V Li-ion batteries (13S) 275W, 5A output current with 53.3V Charging Voltage (4.1V)
This Cycle-life Charger has been designed to cut-off the charging voltage at 53.3V and not at 54.6V. In this way you "lose" around 15% capacity, how ever you gain around 30% cycle-Life
Highlights / Technical Details
Cable length: approx. 100 cm
Output: 5A – quick and powerful
Connector: XLR-3 , DC Round plus (5.5 x 2.1 mm) with adapter, XT-60, XT-90, Anderson PowerPole
Input: 100 – 240V AC
Manufacturer: Fuyuang
Brand: Enerpower
Model: EP-FY5505000
CC/CV with End-of-Charge voltage of 53.3V + 0.2V
Charges Li-ion batteries of 48V 13S (nominal voltage 46.8V - 48.1V)
GS – certified safety standards according to § 21 ProdSG
Efficiency: approx. 94%
Power: approx. 275W
Dimensions: 235 x 110 x 65 mm
Weight: 1400 Gramm
Safety
Over-current protection: <5.4A
Short-circuit protection: 3.5W
Reversed-polarity protection
Compatibility
A variety of li-ion batteries of 48V, type 13S (nominal voltage of 46.8V - 48.1V)
High quality charger from Fuyuang for 48V Li-ion batteries (13S) 275W, 5A output current with 53.3V Charging Voltage (4.1V)
This Cycle-life Charger has been designed to cut-off the charging voltage at 53.3V and not at 54.6V. In this way you "lose" around 15% capacity, how ever you gain around 30% cycle-Life
Highlights / Technical Details
Cable length: approx. 100 cm
Output: 5A – quick and powerful
Connector: XLR-3 , DC Round plus (5.5 x 2.1 mm) with adapter, XT-60, XT-90, Anderson PowerPole
Input: 100 – 240V AC
Manufacturer: Fuyuang
Brand: Enerpower
Model: EP-FY5505000
CC/CV with End-of-Charge voltage of 53.3V + 0.2V
Charges Li-ion batteries of 48V 13S (nominal voltage 46.8V - 48.1V)
GS – certified safety standards according to § 21 ProdSG
Efficiency: approx. 94%
Power: approx. 275W
Dimensions: 235 x 110 x 65 mm
Weight: 1400 Gramm
Safety
Over-current protection: <5.4A
Short-circuit protection: 3.5W
Reversed-polarity protection
Compatibility
A variety of li-ion batteries of 48V, type 13S (nominal voltage of 46.8V - 48.1V)
High quality charger from Fuyuang for 48V Li-ion batteries (13S) 275W, 7A output current with 54.6V
Highlights / Technical Details
Cable length: approx. 100 cm
Output: 7A – quick and powerful
Connector: XLR-3 , DC Round plus (5.5 x 2.1 mm) with adapter, XT-60, XT-90, Anderson PowerPole
Input: 100 – 240V AC
Manufacturer: Fuyuang
Brand: Enerpower
Model: EP-FY5507000
CC/CV with End-of-Charge voltage of 54.6V + 0.2V
Charges Li-ion batteries of 48V 13S (nominal voltage 46.8V - 48.1V)
GS – certified safety standards according to § 21 ProdSG
Efficiency: approx. 94%
Power: approx. 385W
Dimensions: 235 x 110 x 65 mm
Weight: 1400 Gramm
Safety
Over-current protection: <7.4A
Short-circuit protection: 3.5W
Reversed-polarity protection
Compatibility
A variety of li-ion batteries of 48V, type 13S (nominal voltage of 46.8V - 48.1V)
Fuyuang charger CCCV 170W (42V / 2A charging current) for 2 x 36V eBike batteries XLR-3
You can also purchase adapters from XLR-3 to circular plugs (DC 5.5 x 2.1 mm) from us, as well as adapters from XLR-3 to XLR-4 and XLR-5 to charge 36V batteries with another connector. The compatibility with different systems can be found below.
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
170W output power: 2 x 85W (up to 2A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 1.8A (Max.)
Output
42V DC 2A
Safety Measures
Over current protection: < 2.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with 36V batteries (i.a.)
XLR-3:Prophete Alu TreckingMifaRexPropheteAldiDC (5.5 x 2.1 mm):PropheteMifaDifferent types of Rack batteriesXLR-5TranzX - SystemeWinoraVictoriaXLR-4Derby CyclesKalkhofRALEIGH RCA (Chinch)Little Frog
Charging Time
Battery with 10Ah = about 5.5 hours
Battery with 15Ah = about 8 hours
Battery with 18Ah = about 9.5 hours
ENERpower HaiLong Masada Frame Battery Li-Ion 36V 15Ah for Pedelecs & eBikes DIY Conversion Kit.
For motors from 250 Watts and up to 750 Watts
Important general information
The 36V batteries in Hailong Masada case, which we assemble, are so-called “Frame Batteries”, which can be fixed to the bike’s frame. The batteries are assembled with plastic cell-holders. Charging is enabled using a DC round plug (5.5 mm / 2.1 mm) and discharging is done with a discharge cable with an XT90 plug.
The Hailong Masada is the most compact case of its kind with space for 50 18650, oder 30 21700 Li-ion cells and suitable especially for users, which are looking to save space on the bikes. The battery is placed in a case which can be easily mounted on the frame of the bike.
The BMS (Battery Management System) can somewhat withstand a constant current (22A). Hence this battery is suitable also for motors with up tp 750W.
This case has also an ON-Off-Switch and has special silicon insultion to protect it from water.
So you can choose not only the connector itself, but also the right charger. The difference between the chargers is due to the different output currents (charging speed).
Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Weight: About 2.85 kg.
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical data
Li-ion cell: LG Chem INR21700-M50T
Voltage (nominal): 36V (37V)
Capacity: 15Ah
Power: About 540Wh
Configuration: 10S3P
Internal resistance: < 75 mOhm
Charge Voltage: 42V
End-of-Discharge Voltage: 30V
Maximum charging: 5A
Continuous Discharge Current: 20A = 720 watts
10 Min. Discharge current: 25A = 900 Watts
5 Seconds Discharge Current: 35A = 1260 Watts
Dimensions
Length: About 425 mm
Width: 90 mm
Height: 105 mm
Scope of Delivery
Akku 36V 8,8Ah
Halterung
2 Schlüssel
ENERpower HaiLong Masada Frame Battery Li-Ion 36V 15Ah for Pedelecs & eBikes DIY Conversion Kit.
For motors from 250 Watts and up to 750 Watts
Important general information
The 36V batteries in Hailong Masada case, which we assemble, are so-called “Frame Batteries”, which can be fixed to the bike’s frame. The batteries are assembled with plastic cell-holders. Charging is enabled using a DC round plug (5.5 mm / 2.1 mm) and discharging is done with a discharge cable with an XT90 plug.
The Hailong Masada is the most compact case of its kind with space for 50 18650, oder 30 21700 Li-ion cells and suitable especially for users, which are looking to save space on the bikes. The battery is placed in a case which can be easily mounted on the frame of the bike.
The BMS (Battery Management System) can somewhat withstand a constant current (22A). Hence this battery is suitable also for motors with up tp 750W.
This case has also an ON-Off-Switch and has special silicon insultion to protect it from water.
So you can choose not only the connector itself, but also the right charger. The difference between the chargers is due to the different output currents (charging speed).
Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Weight: About 2.85 kg.
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical data
Li-ion cell: LG Chem INR21700-M50T
Voltage (nominal): 36V (37V)
Capacity: 15Ah
Power: About 540Wh
Configuration: 10S3P
Internal resistance: < 75 mOhm
Charge Voltage: 42V
End-of-Discharge Voltage: 30V
Maximum charging: 5A
Continuous Discharge Current: 20A = 720 watts
10 Min. Discharge current: 25A = 900 Watts
5 Seconds Discharge Current: 35A = 1260 Watts
Dimensions
Length: About 425 mm
Width: 90 mm
Height: 105 mm
Scope of Delivery
Akku 36V 8,8Ah
Halterung
2 Schlüssel
ENERpower HaiLong Masada Frame Battery Li-Ion 48V 12.80Ah for Pedelecs & eBikes DIY Conversion Kit.
For motors from 250 Watts and up to 950 Watts
Important general information
The 48V batteries in Hailong Masada case, which we assemble, are so-called “Frame Batteries”, which can be fixed to the bike’s frame. The batteries are assembled with plastic cell-holders. Charging is enabled using a DC round plug (5.5 mm / 2.1 mm) and discharging is done with a discharge cable with an XT90 plug.
The Hailong Masada is the most compact case of its kind with space for 52 18650, oder 30 21700 Li-ion cells and suitable especially for users, which are looking to save space on the bikes. The battery is placed in a case which can be easily mounted on the frame of the bike.
The BMS (Battery Management System) can somewhat withstand a constant current (22A). Hence this battery is suitable also for motors with up tp 750W.
This case has also an ON-Off-Switch and has special silicon insultion to protect it from water.
So you can choose not only the connector itself, but also the right charger. The difference between the chargers is due to the different output currents (charging speed).
Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Weight: About 2.85 kg.
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical data
Li-ion cell: LG Chem INR18650-MH1
Voltage (nominal): 48V (13S)
Capacity: 12.80Ah
Power: About 615Wh
Configuration: 13S4P
Internal resistance: < 75 mOhm
Charge Voltage: 54.6V
End-of-Discharge Voltage: 39V
Maximum charging: 5A
Continuous Discharge Current: 20A = 950 watts
10 Min. Discharge current: 25A = 1280 Watts
5 Seconds Discharge Current: 30A = 1440 Watts
Dimensions
Length: About 425 mm
Width: 90 mm
Height: 105 mm
Scope of Delivery
Akku 48V 12.80Ah
Halterung
2 Schlüssel
ENERpower Frame Battery Li-Ion Hailong PLUS DIY 48V from own manufacturing 16Ah (765Wh) with LG Chem INR18650-MH1
Important General Information
This battery was used for the older model UDX. The bracket, as seen in the picture, has 5 pins. The assignment of plus and minus on the contacts is identical to this model and the battery can replace the old one without any adjustments.
Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical data
Li-Ion Cell: LG Chem INR18650-MH1
Voltage (nominal): 48V
Capacity: 16Ah
Power: 765Wh
Configuration: 13S5P
Internal resistance: < 75 mOhm
Charging voltage: 54.6V
End-of-Discharge Voltage: 39V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 3.65 kg.
Charge: DC round plug 5.5 mm/2.5 mm
Discharge: Cable with 30A fuse with XT90 power connector
ENERpower Frame Battery Li-Ion Hailong PLUS DIY 48V from own manufacturing 16Ah (765Wh) with LG Chem INR18650-MH1
For motors up to 950 Watt
Important General Information
This 48V battery in the Hailong PLUS case, which we manufacture, can be mounted on the frame or on the luggage carrier of the bike. The batteries are manufactured in cell holders made of plastic. Charging is made possible with a DC circular connector (5.5 mm / 2.5 mm), discharging via the bracket (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This case can hold up to 65 18650 battery cells. With a BMS that can withstand 20A-22A continuous load, this battery is suitable for motors with up to 1000 watts of power, working in 48V (13S) systems.The battery holder is identical to the Hailong Pro holder (52-cell case). So you can use the holder for the 2 different cases.So you can choose not only the connector itself, but also the right charger. The difference in the chargers is due to the different output currents (charging speed).
Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical data
Li-Ion Cell: LG Chem INR18650-MH1
Voltage (nominal): 48V
Capacity: 16Ah
Power: 765Wh
Configuration: 13S5P
Internal resistance: < 75 mOhm
Charging voltage: 54.6V
End-of-Discharge Voltage: 39V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 3.65 kg.
Charge: DC round plug 5.5 mm/2.5 mm
Discharge: Cable with 30A fuse with XT90 power connector
ENERpower Frame Battery Li-Ion Hailong PLUS DIY 48V from own manufacturing 16Ah (765Wh) with LG Chem INR18650-MH1
For motors up to 950 Watt
Important General Information
This 48V battery in the Hailong PLUS case, which we manufacture, can be mounted on the frame or on the luggage carrier of the bike. The batteries are manufactured in cell holders made of plastic. Charging is made possible with a DC circular connector (5.5 mm / 2.5 mm), discharging via the bracket (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This case can hold up to 65 18650 battery cells. With a BMS that can withstand 20A-22A continuous load, this battery is suitable for motors with up to 1000 watts of power, working in 48V (13S) systems.The battery holder is identical to the Hailong Pro holder (52-cell case). So you can use the holder for the 2 different cases.So you can choose not only the connector itself, but also the right charger. The difference in the chargers is due to the different output currents (charging speed).
Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical data
Li-Ion Cell: LG Chem INR18650-MH1
Voltage (nominal): 48V
Capacity: 16Ah
Power: 765Wh
Configuration: 13S5P
Internal resistance: < 75 mOhm
Charging voltage: 54.6V
End-of-Discharge Voltage: 39V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 3.65 kg.
Charge: DC round plug 5.5 mm/2.5 mm
Discharge: Cable with 30A fuse with XT90 power connector
ENERpower Frame Battery Li-Ion Hailong PLUS DIY 48V from own manufacturing 17.Ah (825Wh) with LG Chem INR18650-MJ1
For motors up to 950 Watt
Important General Information
This 48V battery in the Hailong PLUS case, which we manufacture, can be mounted on the frame or on the luggage carrier of the bike. The batteries are manufactured in cell holders made of plastic. Charging is made possible with a DC circular connector (5.5 mm / 2.5 mm), discharging via the bracket (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This case can hold up to 65 18650 battery cells. With a BMS that can withstand 20A-22A continuous load, this battery is suitable for motors with up to 1000 watts of power, working in 48V (13S) systems.The battery holder is identical to the Hailong Pro holder (52-cell case). So you can use the holder for the 2 different cases.So you can choose not only the connector itself, but also the right charger. The difference in the chargers is due to the different output currents (charging speed).
Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical data
Li-Ion Cell: LG Chem INR18650-MJ1
Voltage (nominal): 48V
Capacity: 17.2Ah
Power: 825Wh
Configuration: 13S5P
Internal resistance: < 75 mOhm
Charging voltage: 54.6V
End-of-Discharge Voltage: 39V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 3.65 kg.
Charge: DC round plug 5.5 mm/2.5 mm
Discharge: Cable with 30A fuse with XT90 power connector
ENERpower frame battery Li-Ion Hailong PLUS DIY 36V (37V) from our own assembly in Berlin with INR18650-MH1 For motors from 250 watts to 750 wattsImportant general informationThis 36V battery in the Hailong PLUS housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm), discharging takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. Up to 65 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.The battery holder is identical to the Hailong Pro holder (housing with space for 52 battery cells). So you can use the bracket for the 2 different housings.So you can not only choose the connector yourself, but also the right charger.The difference in the chargers lies in the different output currents (charging speed).
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR18650-MH1 Voltage (nominal): 36V (37V) Capacity: 19.20Ah Energy: 695Wh Configuration: 10S6P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.3.35 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: XT-60, XT-90, Anderson PowerPole
ENERpower frame battery Li-Ion Hailong Pro DIY 36V (37V) from our own assembly line in Berlin with LG Chem INR18650-MH1 For motors from 250 watts to 750 wattsImportant general informationThis 36V battery in the Hailong Pro housing, which we assemble in Berlin, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm), discharging takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (Discharge) connector. Up to 52 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.The battery holder is identical to the Hailong Plus holder (housing with space for 65 battery cells). So you can use the holder for the 2 different housings.So you can not only choose the connector yourself, but also the right charger.The difference in the chargers lies in the different output currents (charging speed).
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR18650-MH1 Voltage (nominal): 36V (37V) Capacity: 16Ah Energy: 580Wh Configuration: 10S5P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.2.75 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: XT-60 / XT-90 / Anderson PowerPoleDimensions (with bracket) Length: approx. 370 mm Width: 90 mm Height: 85-90 mm
ENERpower frame battery Li-Ion Hailong Pro DIY 36V (37V) from our own assembly line in Berlin with LG Chem INR18650-MH1 For motors from 250 watts to 750 wattsImportant general informationThis 36V battery in the Hailong Pro housing, which we assemble in Berlin, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm), discharging takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (Discharge) connector. Up to 52 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.The battery holder is identical to the Hailong Plus holder (housing with space for 65 battery cells). So you can use the holder for the 2 different housings.So you can not only choose the connector yourself, but also the right charger.The difference in the chargers lies in the different output currents (charging speed).
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR18650-MH1 Voltage (nominal): 36V (37V) Capacity: 16Ah Energy: 580Wh Configuration: 10S5P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.2.75 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: XT-60 / XT-90 / Anderson PowerPoleDimensions (with bracket) Length: approx. 370 mm Width: 90 mm Height: 85-90 mm
ENERpower frame battery Li-Ion Hailong Pro DIY 36V (37V) from our own assembly line in Berlin with LG Chem INR18650-MJ1 For motors from 250 watts to 750 wattsImportant general informationThis 36V battery in the Hailong Pro housing, which we assemble in Berlin, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm), discharging takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (Discharge) connector. Up to 52 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.The battery holder is identical to the Hailong Plus holder (housing with space for 65 battery cells). So you can use the holder for the 2 different housings.So you can not only choose the connector yourself, but also the right charger.The difference in the chargers lies in the different output currents (charging speed).
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR18650-MJ1 Voltage (nominal): 36V (37V) Capacity: 17.25Ah Energy: 625Wh Configuration: 10S5P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.2.75 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: XT-60 / XT-90 / Anderson PowerPoleDimensions (with bracket) Length: approx. 370 mm Width: 90 mm Height: 85-90 mm
€485.00*
We Have a New Website!
or
This website uses cookies to ensure the best experience possible. More information...