ENERpower Frame battery LOD battery 36V | Format 10S4P | Energy 720 Wh | Capacity 20 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50TImportant general informationThis 36V battery in the Hailong Lod housing, which we assemble , can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. The charging of the battery is done with a DC Round Plug 5.5 x 2.1 mmDischarging of the battery takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 40 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, that is located in the front.So you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 500 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR21700-50E Voltage (nominal): 36V Capacity: 20Ah Energy: 720Wh Configuration: 10S4P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Safety Fuse: 30A Weight: approx.3.50 kg (without bracket) Charging: DC 5.5 x 2.1 mm Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)
dimensions Length: 320 mm Width: 88.5 mm Height: 117 mm
ENERpower Frame battery LOD battery 36V | Format 10S4P | Energy 720 Wh | Capacity 20 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50TImportant general informationThis 36V battery in the Hailong Lod housing, which we assemble , can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. The charging of the battery is done with a DC Round Plug 5.5 x 2.1 mmDischarging of the battery takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 40 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, that is located in the front.So you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 500 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR21700-50E Voltage (nominal): 36V Capacity: 20Ah Energy: 720Wh Configuration: 10S4P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Safety Fuse: 30A Weight: approx.3.50 kg (without bracket) Charging: DC 5.5 x 2.1 mm Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)
dimensions Length: 320 mm Width: 88.5 mm Height: 117 mm
ENERpower Megiddo battery 36V for the Frame | Format 10S5P | Energy 720 Wh - 900Wh | Capacity 20 Ah - 25 Ah | for pedelecs, eBikes DIY | with Samsung INR21700-40T / INR21700-50EImportant general informationThis 36V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a Zenith IP67 Connector. We have an adapter from XLR-3 to Zenith connector, so all youneed is a charger with XLR3 connectorunloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 52 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR21700-40T / INR21700-50E Voltage (nominal): 36V Capacity: 20Ah - 25Ah Energy: 720Wh - 900Wh Configuration: 10S5P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Safety Fuse: 30A Weight: approx.4.20 kg (without bracket) Charging: Zenith IP67 Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)dimensions Length: 368 mm Width: 95 mm Height: 122 mm
ENERpower Megiddo battery 36V for the Frame | Format 10S5P | Energy 900Wh | Capacity 25 Ah | for pedelecs, eBikes DIY | with Samsung INR21700-50E.Important general informationThis 36V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm),unloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 52 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR21700-50E Voltage (nominal): 36V Capacity: 25Ah Energy: 900Wh Configuration: 10S5P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Safety Fuse: 30A Weight: approx.4.20 kg (without bracket) Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)dimensions Length: 368 mm Width: 95 mm Height: 122 mm
ENERpower Megiddo battery 48V for the Frame | Format 13S4P | Energy 770 Wh - 960Wh | Capacity 16 Ah - 20 Ah | for pedelecs, eBikes DIY | with Samsung INR21700-40T / INR21700-50E.Important general informationThis 48V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm),unloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 52 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR21700-40T / INR21700-50E Voltage (nominal): 48V Capacity: 16Ah - 20Ah Energy: 770Wh - 960Wh Configuration: 13S4P Internal resistance: <75 mOhm Charging voltage: 54.6V Final discharge voltage: 39V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Safety Fuse: 30A Weight: approx.4.30 kg (without bracket) Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)dimensions Length: 368 mm Width: 95 mm Height: 122 mm
ENERpower Megiddo battery 48V for the Frame | Format 13S4P | Energy 960Wh | Capacity 20 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50T.Important general informationThis 48V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm),unloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 52 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR21700-M50T Voltage (nominal): 48V Capacity: 20Ah Energy: 960Wh Configuration: 13S4P Internal resistance: <75 mOhm Charging voltage: 54.6V Final discharge voltage: 39V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Safety Fuse: 30A Weight: approx.4.30 kg (without bracket) Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)dimensions Length: 368 mm Width: 95 mm Height: 122 mm
ENERpower Megiddo battery 48V for the Frame | Format 13S4P | Energy 960Wh | Capacity 20 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50T.Important general information.This battery was used for the new model UDX and in some of the UNIMOKE bikes. The bracket, as seen in the picture, has 4 pins. The assignment of plus and minus on the contacts is identical to this model and the battery can replace the old one without any adjustments.
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR21700-M50T Voltage (nominal): 48V Capacity: 20Ah Energy: 960Wh Configuration: 13S4P Internal resistance: <75 mOhm Charging voltage: 54.6V Final discharge voltage: 39V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Safety Fuse: 30A Weight: approx.4.30 kg (without bracket) Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)dimensions Length: 368 mm Width: 95 mm Height: 122 mm
Important general informationThis battery in the Nablus housing is a luggage rack battery that can be manufactured as a 36V (10S) as well as a 48V (13S) battery. There is space for 52 Li-Ion 18650 cells in the housing. The maximum assignment for 36V is 10S5P and for 48V 13S4P.The case is approx. 438 mm long, 156 mm wide and 67 mm high.The battery is charged with a charger with a DC circular connector.The on / off switch is also located on the battery and there is no charge indicator in this housing.The battery case comes with cell holders and a mounting plateScope of delivery:1 x empty Enerpower Nablus 10S5P housing1 x luggage rack FME0006
ENERpower Bike-Frame-Battery Li-Ion Hailong Reention Jaffa DIY 48V (13S) from own manufacturing with 24.15Ah (INR18650-MJ1)
For motors from 250 Watts and up to 750 Watts
This 48V battery in the Hailong Reention Babylon case, which we assemble , can be mounted on the frame or on the luggage carrier of the bike. The batteries are manufactured in cell holders made of plastic. Charging is made possible with a DC circular connector (5.5 mm / 2.5 mm), discharging via the bracket (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This case can hold up to 91 18650 battery cells. With a BMS that can withstand 20A-22A continuous load, this battery is suitable for motors with up to 960 watts of power, working in 48V (13S) systems.The battery holder is very small and therefore we implement the Fuse inside the Discharge Cable
The On/Off button enable the user the turn the battery on and off as an additional feature.
Highlights
High quality assembly – Made in Germany
Assembly Just-In-Time
BMS with an integrated passive balancer
BMS with protection against overcharge, over-discharge, deep-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 500 charging cycles, still maintaines about 70% of the original capacity
No memory effect – charge your battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Details
Li-Ion-cell: LG Chem INR18650-MJ1
Voltage (nominal): 48V (13S)
Capacity: 24.15Ah
Power: 1160Wh
Configuration: 13S7P
Internal resistance: < 75 mOhm
Charge Voltage: 54,6V
End-of-discharge Voltage: 30V
BMS continueous discharge current: 22A
BMS 10 Min. discharge current: 25A
BMS 5 Sec. discharge current: 30A
Safety fuse: 30A
Weight: approx. 4.95 Kg.
Charging: DC round plug 5.5 mm / 2.5 mm
Discharging: Cable with fuse 30A with XT60
ENERpower Akkon Li-Ion battery 48V | Format 13S4P | Energy 615Wh | Capacity 12.80Ah | for pedelecs, eBikes DIY | Important general informationThis 48V battery in the Hailong Akkon housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm),unloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 52 18650 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 1000 watts of power that work in 48V (13S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR18650-MH1 Voltage (nominal): 48V Capacity: 12.8Ah Energy: 615Wh Configuration: 13S4P Internal resistance: <75 mOhm Charging voltage: 54.6V Final discharge voltage: 39V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Safety Fuse: 30A Weight: approx.3.50 kg (without bracket) Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)dimensions Length: 368 mm Width: 90 mm Height: 96 mm
Description
Enerpower Silverfish 36V 14.25Ah (515Wh) battery without a holder, which is designed for use with the UNI MK and UNI Swing models 36V. The battery is manufactured in Germany and is made to order with a just-in-time manufacturing process. It comes with a built-in battery management system (BMS) that includes a passive balancer and protects against overcharging, deep discharge, and over-discharge. The BMS also monitors temperature.
The battery is rechargeable and can retain 80% of its original capacity after 300 charging cycles. It has no memory effect, meaning it can be charged at any time without affecting its performance. It is also environmentally friendly, in accordance with EU directive 2002/95/EG (RoHS).
Technical certification:
Battery cells: Samsung SDI INR18650-29E lithium-ion cells,
nominal voltage of 36V
capacity of 14.25Ah
energy of 515Wh.
Configuration: 10S5P
internal resistance: less than 75 mOhm.
The battery can be charged using an XLR-3-Pin connector and discharged using the plus and minus contacts on the battery's contact plate.
The battery has a weight of approximately 4.55 kg
Dimensions of 410 x 110 x 75 mm.
BMS: can handle a continuous discharge current of up to 22A, a 10-minute discharge current of up to 25A, and a 5-second discharge current of up to 30A.
The battery also has a 30A fuse for added safety.
Enerpower Silverfish Battery 48V 14.25Ah with no Bracket (410 x 115 x 75 mm) - Second Choice
The battery is new, but has some small damages on the case (like Scratches)
Description
Enerpower Silverfish 36V 14,25Ah (515Wh) battery without a holder, which is designed for use with the UNI MK and UNI Swing models with 36V. The battery is manufactured in Germany and is made to order with a just-in-time manufacturing process. It comes with a built-in battery management system (BMS) that includes a passive balancer and protects against overcharging, deep discharge, and over-discharge. The BMS also monitors temperature.
The battery is rechargeable and can retain 80% of its original capacity after 300 charging cycles. It has no memory effect, meaning it can be charged at any time without affecting its performance. It is also environmentally friendly, in accordance with EU directive 2002/95/EG (RoHS).
Technical certification:
Battery cells: Samsung SDI INR18650-29E lithium-ion cells,
nominal voltage of 36V
capacity of 14.25Ah
energy of 515Wh.
Configuration: 10S5P
internal resistance: less than 75 mOhm.
The battery can be charged using an XLR-3-Pin connector and discharged using the plus and minus contacts on the battery's contact plate.
The battery has a weight of approximately 3.45 kg
Dimensions of 410 x 110 x 75 mm.
BMS: can handle a continuous discharge current of up to 22A, a 10-minute discharge current of up to 25A, and a 5-second discharge current of up to 30A.
The battery also has a 30A fuse for added safety.
Description
Enerpower Silverfish 48V 20,40Ah (980Wh) battery without a holder, which is designed for use with the UNI MK and UNI Swing models. The battery is manufactured in Germany and is made to order with a just-in-time manufacturing process. It comes with a built-in battery management system (BMS) that includes a passive balancer and protects against overcharging, deep discharge, and over-discharge. The BMS also monitors temperature.
The battery is rechargeable and can retain 80% of its original capacity after 300 charging cycles. It has no memory effect, meaning it can be charged at any time without affecting its performance. It is also environmentally friendly, in accordance with EU directive 2002/95/EG (RoHS).
Technical certification:
Battery cells: LG Chem INR18650-MJ1 lithium-ion cells,
nominal voltage of 48V
capacity of 20.40Ah
energy of 980Wh.
Configuration: 13S6P
internal resistance: less than 75 mOhm.
The battery can be charged using an XLR-3-Pin connector and discharged using the plus and minus contacts on the battery's contact plate.
The battery has a weight of approximately 4.55 kg
Dimensions of 410 x 110 x 75 mm.
BMS: can handle a continuous discharge current of up to 22A, a 10-minute discharge current of up to 25A, and a 5-second discharge current of up to 30A.
The battery also has a 30A fuse for added safety.
This display is compatible with Tongsheng Mid-Motor TSDZ2 compatible
Specifications:
①Power supply:DC 36V/48V
②Rated current:12mA@36V
③Shutdown leakage current:<1uA
④Screen specification:1.3”OLED(64*128 dots)
⑤communication method:UART(default)
⑥Operating temperature:-20°C ~ 60°C
⑦Storage temperature:-30°C ~ 80°C
⑧Waterproof level:IP65
Functional overview
Four buttons, easy to operate
Use password to turn on
Km / miles
Speed display: Real-time speed(SPEED)、maximum speed(MAX)、average speed(AVG)
Four stalls of power assist control: ECO-TOUR-SPORT-TURBO
Battery:1-5level power
Headlight indicator: Headlight on/off status indication (need information from controller)
Mileage display: Subtotal mileage (TRIP), total mileage (ODO)
Riding time (TRIP TIME)display
6km/h walk assist function
Error code indication
Manual: follow bitte the link
Modify your own Kit
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2 250W Edition 2020 36V + Battery ENERpower Gath for the rack in 2 sizes (17.10Ah and 20.30Ah)
Charger and Display you can choose out from the List of available products
General Information
This kit includes a Tongsheng TSWZ2 36V motor kit with 250W output power along with a ENERpower rechargeable Li-ion rack battery Gath in 36V, Display and a charger.
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 36V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
42T
Display
Type: VLCD5, or XH-18
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Powered by Samsung SDI
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
General Information
Manufacturer: ENERpower (Germany)
Type: Gath Rack battery
Li-ion battery cell: Samsung INR18650-35E (20.30Ah) / Samsung INR18650-29E (17.10Ah)
Voltage (nominal): 36V (10S)
Charging voltage: 42V
With State of Charge indicator
With Taillight
Tongsheng TSDZ2B 36V 250W Mid-drive Motor 8-Pins Version with Throttle (Starting Aid) + VLCD5 Display + Accessories + Nablus Battery for Luggage Rack
This version is the 8-Pins Version and comes with a throttle and a VLCD5 display.
The suitable charger you have to choose in addition from the bundle offers
The Nablus battery does not come with a rear light and battery level indicator.
General Information about the Motor:
Tongsheng motors are known for their easy and uncomplicated installation. The motor already has the controller integrated, and the kit includes all necessary accessories such as cables, speed sensor, etc. You can choose the appropriate display from our bundle offer. This motor complies with the requirements of road traffic regulations and does not require approval. The maximum speed is preset to 25 km/h. The TSDZ2 has a built-in torque sensor that regulates the level of assistance. The offered mid-drive motor does NOT have a backpedal function!
The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket housing with dimensions: housing width 67 mm to 69 mm, inner diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom brackets. This motor has a freewheel, and there are no brake possibilities through the pedals.
The TSDZ2B version has two freewheel bearings. In the off state, the resistance of the motor is lower, making pedaling easier.
This version of the motor is the 8-Pins Version, which features a throttle. The throttle serves as a starting aid (up to 6 km/h) and makes this motor version ideal for cargo bikes, utility bikes, etc.
General Information about the Battery:
This 36V battery in the Nablus luggage rack housing, which we assemble in Berlin, comes with a frame for the luggage rack. The batteries are made in plastic cell holders. Charging is enabled with a DC round connector (5.5 mm / 2.5 mm), and discharging is done through the holder (detachable from the battery) with an XT90 connector. This case can accommodate up to 60 18650 battery cells. With a BMS capable of handling continuous loads between 20A-22A, this battery is suitable for motors with up to 750W power operating in 36V (37V) systems. There is an on/off switch located on the battery, and this case does not have a battery level indicator.
Technical Data: Motor
Manufacturer: Tongsheng (China)
Model: TSDZ2B
Motor Type: Mid-drive Motor
Wheel Diameter: 16' - 28'
Power: 250W-350W
Voltage: 48V
Torque: 50N.m - 80N.m
Level of Assistance: 36% ~ 300%
Maximum Speed: 25Km/h
Weight: 3.3 Kg.
Battery Technical Data:
Li-Ion Cell: INR18650-29E / INR18650-MH1 / INR18650-35E
Voltage (nominal): 36V (37V)
Capacity: 17.10Ah / 19.20Ah / 20.30Ah
Configuration: 10S6P
Internal Resistance: < 75 mOhm
Charging Voltage: 42V
Discharge Cut-off Voltage: 30V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Fuse: 30A
Weight: approximately 3.35 Kg.
Charging: DC Round Connector 5.5 mm / 2.5 mm
Discharging: Cable with 30A Fuse with XT60 High-Current Connector (Counterpart included)
Dimensions:
Length: approximately 425 mm
Width: approximately 156 mm
Height: 64 mm
Content:
1 x Tongsheng TSDZ2B motor 8-Pins
1 x Speed sensor + Cable with splitter
1 x Light cable
1 x Tool
2 x Bicycle cranks
1 x VLCD5 Display
1 x Throttle
1 x Nablus Battery for Luggage Rack (depending on selection)
1 x Luggage Rack FME0006
Tongsheng Controller for Mid-Motor TSDZ2 48V Version 2020 with 6-pinsCompatible with Tongsheng TSDZ2 Mid motor with Free WheelScope of delivery:1 x Tongsheng Controller for Mid-Motor TSDZ2 48V
Fuyuang (Enerpower) EP-FY4253000 fast charger CCCV 125W (42V / 3A charging current) for 36V eBike batteries from TranzX
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
125W output power (up to 2A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2A (Max.)
Output
42V DC 3A
Connector: XLR-5-Pins
Safety Measures
Over current protection: < 3.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with TranzX BL03, TranzX BL07
Charging Time
Battery with 10Ah = about 5.5 hours
Battery with 15Ah = about 8 hours
Battery with 18Ah = about 9.5 hours
Fuyuang (Enerpower) EP-FY4253000 fast charger CCCV 125W (42V / 3A charging current) for 36V eBike batteries from Victoria
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
125W output power (up to 2A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2A (Max.)
Output
42V DC 3A
Connector: XLR-5-Pins
Safety Measures
Over current protection: < 3.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with Victoria eBikes
Victoria St.Moritz
Victoria Niederrhein
Victoria Schönau
Victoria Cremona
Victoria St. Vincent
Victoria e Urban 5.1
Victoria e Urban 5.7
Victoria e Urban 5.8
Victoria Emden
Victoria Lucca
Victoria snap it
Charging Time
Battery with 10Ah = about 5.5 hours
Battery with 15Ah = about 8 hours
Battery with 18Ah = about 9.5 hours
Fuyuang 12V-24V Li-Ion-Charger (29.4V) for Batteries 24V | output 3A | power 88W | with DC Round Plug / XLR-3 / RCA (Chinch)
With this 88W, 12V-24V DC charger from Fuyuang (Enerpower) you can easily charge your ebike battery using the 12V cigarettes lighter in your car or caravan/mobile home.
Highlights / Technical Details
Cable length: ca. 100 cm
Output: 3A / 88 Watt
Plug: DC Round Plug 5.5mm / 2.1mm or XLR-3 / RCA (Chinch)
Input: 12V-24V DC 9A (Max.)
Manufacturer: Fuyuang
Brand: Enerpower
CC/CV with End-of-Charge voltage of 29.4V + 0.2V
Charges Li-ion batteries of 24V (25.2V - 25.9V)
Energy: 88W
Safety
Over-current protection: <3.3A
Short-circuit protection: 3.5W
Reversed-polarity protection
Fuyuang 12V-24V Li-Ion-Charger (42V) for Batteries 36V | output 2A | power 85W | with DC Round Plug / XLR-3 / XLR-4 / XLR-5 / RCA (Chinch)
With this 85W, 12V-24V DC charger from Fuyuang (Enerpower) you can easily charge your ebike battery using the 12V cigarettes lighter in your car or caravan/mobile home.
Highlights / Technical Details
Cable length: ca. 100 cm
Output: 2A / 85 Watt
Plug: DC Round Plug 5.5mm / 2.1mm or XLR-3 / XLR-4 / XLR-5 / RCA (Chinch)
Input: 12V-24V DC 10A (Max.)
Manufacturer: Fuyuang
Brand: Enerpower
CC/CV with End-of-Charge voltage of 42V + 0.2V
Charges Li-ion batteries of 36V (10S)
Energy: 85W
Dimensions without cables: 15 x 6 x 4 cm
Weight: about 465 Gramm
Safety
Over-current protection: <2.3A
Short-circuit protection: 3.5W
Reversed-polarity protection
Fuyuang 12V-24V Li-Ion-Charger (42V) for Batteries 36V | output 3A | power 125W | with DC Round Plug / XLR-3 / XLR-4 / XLR-5 / RCA (Chinch)
With this 82W, 12V-24V DC charger from Fuyuang (Enerpower) you can easily charge your ebike battery using the 12V cigarettes lighter in your car or caravan/mobile home.
Highlights / Technical Details
Cable length: ca. 100 cm
Output: 3A / 125 Watt
Plug: DC Round Plug 5.5mm / 2.1mm or XLR-3 / XLR-4 / XLR-5 / RCA (Chinch)
Input: 12V-24V DC 12A (Max.)
Manufacturer: Fuyuang
Brand: Enerpower
CC/CV with End-of-Charge voltage of 42V + 0.2V
Charges Li-ion batteries of 36V (10S)
Energy: 125W
Safety
Over-current protection: <3.3A
Short-circuit protection: 3.5W
Reversed-polarity protection
Fuyuang 12V-24V Li-Ion-Charger (54.6V) for Batteries 48V | output 1.5A | power 82W | with XLR-3
With this 82W, 12V-24V DC charger from Fuyuang (Enerpower) you can easily charge your ebike battery using the 12V cigarettes lighter in your car or caravan/mobile home.
Highlights / Technical Details
Cable length: ca. 100 cm
Output: 1.5A / 82 Watt
Plug: DC Round Plug 5.5mm / 2.1mm or XLR-3
Input: 12V-24V DC 8A (Max.)
Manufacturer: Fuyuang
Brand: Enerpower
CC/CV with End-of-Charge voltage of 54.6V + 0.2V
Charges Li-ion batteries of 48V (13S)
Energy: 82W
Safety
Over-current protection: <2.8A
Short-circuit protection: 3.5W
Reversed-polarity protection