General information
This set includes a motor kit from Tongsheng of the type TSDZ2 48V with 250W output power together with a softpack battery from ENERpower with 15Ah (13S3P) in a frame bag
We assemble the battery in a special format (cell holder) so that it fits into the frame bag.
If you have a back-pedal bike - choose the back-pedal motor.
A free-wheeling bike (no pedal brake) must be selected with a free-wheeling motor
Tongsheng motors are known for being easy and straightforward to assemble. The controller is already integrated in the motor and all necessary accessories such as cables, speed sensors and lighting cables are included in the kit.
This motor complies with the requirements of the StVO and does not need to be approved. The maximum speed of 25 km / h is preset. The TSDZ2 has an integrated torque sensor and regulates the amount of support. The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: shell width 67 mm to 69 mm, inner diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most frequently installed BSA bottom brackets.
In this offer you have the option of choosing a suitable charger and display from the bundle offers for an additional Fee.
Technical documentation for all components can be found here
Technical specifications Motor
• Manufacturer: Tongsheng (China)
• Model: TSDZ2
• Engine type: mid-engine
• Wheel diameter: 16 '- 28'
• Power: 250W - 350W
• Voltage: 36V or 48V
• Torque: 50N.m - 80N.m
• Degree of support: 36% ~ 300%
• Maximum speed: 25Km / h
• Weight: 3.3 kg.
Battery highlights
• High quality production - Made in Germany
• Just-in-time assembly
• BMS with an integrated passive balancer and protection against overcharging, deep discharge, and overdischarge (temperature monitoring)
• Direct from the manufacturer
• Rechargeable - Still 80% of original capacity after 300 charge cycles
• No memory effect - charge the battery whenever you want
• Environmentally friendly according to EU directive 2002/95 / EG (RoHS)
Battery technical data:
Battery cell: Samsung SDI INR21700-50E / LG Chem INR21700 50MT (subject to availability)
Configuration: 13S3P
Nominal voltage: 48V (13S)
Capacity: 15Ah
Energy: 720Wh
BMS: analog BMS with 20A continuous load
Weight: approx. 2.85 kg.
Load: XLR-3
Discharge: XT-60
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2 250W + Battery ENERpower Hailong Plus 48V 17,25Ah
This Kit you can buy in 2 configuratione:
1. Normal Motor
2. Motor with coaster Break (back pedal)
Display and Charger can be chosen from the list (additional fee)
General Information
This kit includes a Tongsheng TSWZ2 36V motor kit with 250W output power along with a ENERpower Hailong battery pack and one of three different Modiary output 2A, 3A and 4A chargers.
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 36V / 48V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
Display
Type: VLCD5
Type: VLCD6
Type: XH-18
Type: TFT-560C
Type: TFT 510S
Type: TFT 500S-U
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Powered by Samsung INR18650-35E li-ion battery cells
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
Manufacturer: ENERpower (Germany)
Case: Hailong Pro
Type: Bike-frame battery
Li-ion battery cell: Samsung INR18650-35E
Voltage (nominal): 48V
Capacity: 17.25Ah
Energy: 828Wh
Configuration: 13S5P
Internal resistance: < 75 mOhm
Charging voltage: 54.6V
End-of-Discharge Voltage: 39V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 2.95 kg.
Charge: DC round plug 5.5 mm/2.5 mm
Discharge: Cable with 30Afuse with XT90 power connector
Charger
In this set we offer 3 different chargers to choose from:
Manufacturer: Modiary
Input: 100 – 240V AC
Output voltage: 54.6V
CC/CV with end-of-charge voltage of 54.6V + 0.2V
GS - tested safety according to § 21 ProdSG (corresponds with regard to the protection of the safety and health of persons)
Efficiency: approx. 85%
Model
SPBC4802A
MDA204
BC263480050
Output current
2A
3A
5A
Power
110W
160W
273W
Over current protection
< 2.4A
< 3.4A
< 7A
Short circuit protection
3W
3,5W
5,5W
Reverse polarity protection
yes
General information
This set includes a motor kit from Tongsheng of the type TSDZ2 52V with 250W output power together with a softpack battery from ENERpower with 10Ah (14S2P) in a frame bag
We assemble the battery in a special format (cell holder) so that it fits into the frame bag.
If you have a back-pedal bike - choose the back-pedal motor.
A free-wheeling bike (no pedal brake) must be selected with a free-wheeling motor
Tongsheng motors are known for being easy and straightforward to assemble. The controller is already integrated in the motor and all necessary accessories such as cables, speed sensors and lighting cables are included in the kit.
This motor complies with the requirements of the StVO and does not need to be approved. The maximum speed of 25 km / h is preset. The TSDZ2 has an integrated torque sensor and regulates the amount of support. The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: shell width 67 mm to 69 mm, inner diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most frequently installed BSA bottom brackets.
In this offer you have the option of choosing a suitable charger and display from the bundle offers for an additional Fee.
Technical documentation for all components can be found here
Technical specifications Motor
• Manufacturer: Tongsheng (China)
• Model: TSDZ2
• Engine type: mid-engine
• Wheel diameter: 16 '- 28'
• Power: 250W - 350W
• Voltage: 52V
• Torque: 50N.m - 80N.m
• Degree of support: 36% ~ 300%
• Maximum speed: 25Km / h
• Weight: 3.3 kg.
Battery highlights
• High quality production - Made in Germany
• Just-in-time assembly
• BMS with an integrated passive balancer and protection against overcharging, deep discharge, and overdischarge (temperature monitoring)
• Direct from the manufacturer
• Rechargeable - Still 80% of original capacity after 300 charge cycles
• No memory effect - charge the battery whenever you want
• Environmentally friendly according to EU directive 2002/95 / EG (RoHS)
Battery technical data:
Battery cell: LG Chem INR21700 50MT
Configuration: 14S2P
Nominal voltage: 52V (13S)
Capacity: 10Ah
Energy: 520Wh
BMS: analog BMS with 20A continuous load
Weight: approx. 2.55 kg.
Load: XLR-3
Discharge: XT-60
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2 250W + Display + Battery ENERpower Hailong Pro 48V 13.8Ah.
In this offer you can choose between 2 types of Motors:
1. Freewheel
2. With coaster Break (back Pedal function)
The suitable Display and charger you can choose from our different offers on the page (Bundles)
General Information
This kit includes a Tongsheng TSWZ2 48V motor kit with 250W output power along with a ENERpower Hailong battery pack. Charger and Display have to be chosen from our Bundle-offers
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal functionThe kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 48V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
Display
We have several Displays for you to choose from. Manuals you can find here
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Powered by Samsung INR18650-35E li-ion battery cells
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
Manufacturer: ENERpower (Germany)
Case: Hailong Pro
Type: Bike-frame battery
Li-ion battery cell: Samsung INR18650-35
Voltage (nominal): 48V
Capacity: 13.80Ah
Energy: 660Wh
Configuration: 13S4P
Internal resistance: < 75 mOhm
Charging voltage: 54.6V
End-of-Discharge Voltage: 39V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 2.95 kg.
Charge: DC round plug 5.5 mm/2.5 mm
Discharge: Cable with 30Afuse with XT90 power connector
Charger
In this set we offer 3 different chargers to choose from: 2A (110W) / 3A (165W) / 4.5A (250W)
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2B 250W + Battery ENERpower Hailong Masada 36V 15Ah with side realese
You can choose weather you need the free wheeling version, or the one with coaster break. You can choose the display and the suitable charger for your needs.
General Information
This kit includes a Tongsheng TSDZ2B 36V motor kit with 250W output power along with a ENERpower Hailong battery pack. The suitable Display as well as a charger you can choose from our additional offers on the product site
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2B
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 36V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
Display + Charger
You can choose a suitable display and charger from our bundle offers
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Powered by Samsung INR18650-35E li-ion battery cells
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
Manufacturer: ENERpower (Germany)
Case: Hailong Masada
Type: Bike-frame battery
Li-ion battery cell: LG Chem INR21700 M50T
Voltage (nominal): 36V (37V)
Capacity: 15Ah
Energy: approx. 540Wh
Configuration: 10S4P
Internal resistance: < 75 mOhm
Charging voltage: 42V
End-of-discharge voltage: 30V
Maximal charging: 5A
Continuous discharge current: 20A = 720 Watt
10 Min. discharge current: 25A = 900 Watt
5 Sec. discharge current: 35A = 1260 Watt
Constant load per cell: approx. 3.7A or 7A in peak load.
Weight: approx. 3.25 Kg
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2B 250W with and without coaster break + Battery ENERpower Hailong Pro 36V 16Ah (MH1)
The suitable Display and Charger you can configurate from our Bundle-offers and are add-on products (must be paid in addition)
You can choose between Motor with and without coaster break
General Information
This kit includes a Tongsheng 36V motor kit with 250W output power along with a ENERpower Hailong battery pack and one of three different Modiary output 2A, 3A and 4A chargers.
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and a Tool. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2B
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 36V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
Display
You have 5 different Displays to choose from
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Powered by Samsung INR18650-35E li-ion battery cells
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
Manufacturer: ENERpower (Germany)
Case: Hailong Pro
Type: Bike-frame battery
Li-ion Cell: LG Chem INR18650-MH1
Voltage (nominal): 36V (37V)
Capacity: 16Ah
Energy: 580Wh
Configuration: 10S5P
Internal resistance: < 75 mOhm
Charge Voltage: 42V
End-of-Discharge Voltage: 30V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 2.75 kg.
Length: ca. 370 mm
Width: 90 mm
High: 85-90 mm
Charge: DC round plug 5.5 mm/2.5 mm
Discharge: Cable with fuse 30A with XT90 power connector (counterpart is included in the scope of delivery)
Charger
In this set we offer 4 different chargers to choose from with 2A, 3A and 4A output
Another charger is a life-cycle Charger (41.3V 3A)
ENERpower Bike-Seat Tube Battery Li-ion Silverfish 24v from own production 19.6Ah (500Wh) with Samsung INR18650-29E
For motors up to 500 Watt
Important General Information
This 24V battery in the Silverfish case, which we manufacture, can be mounted beind the Seat of your bike (so-called Seat-Tube battery). The batteries are manufactured in cell holders made of plastic. Charging is made possible with an XLR-3-Pins socket, discharging via the down-plate of the battery. This case can hold up to 50 18650 battery cells. With a BMS that can withstand 20A-22A continuous load, this battery is suitable for motors with up to 500 watts of power, working in 24V (7S) systems.
Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
directly from the manufacturer
Rechargeable – After 500 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical Details
Li-ion cell: Samsung SDI INR18650-29E
Voltage (nominal): 29.4V
Capacity: 23.8Ah
Power: 500Wh
Configuration: 7S7P
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-of-Discharge Voltage: 21V
BMS Continuous Discharge Current: 22A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 2.8 kg.
Charge: XLR-3-Pins
Discharge: Battery plate (Plus / Minus)
ENERpower Bike-Seat Tube Battery Li-ion Silverfish 48v from own production 14.25Ah (515Wh) with BAK N18650CL
For motors up to 700 Watt
Important General Information
This 36V battery in the Silverfish case, which we manufacture, can be mounted beind the Seat of your bike (so-called Seat-Tube battery). The batteries are manufactured in cell holders made of plastic. Charging is made possible with an XLR-3-Pins socket, discharging via the down-plate of the battery. This case can hold up to 50 18650 battery cells. With a BMS that can withstand 20A-22A continuous load, this battery is suitable for motors with up to 1000 watts of power, working in 48V (13S) systems.
Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical Details
Li-ion cell: BAK N18650CL
Voltage (nominal): 36V
Capacity: 14.25Ah
Power: 515Wh
Configuration: 10S5P
Internal resistance: < 75 mOhm
Charging voltage: 42V
End-of-Discharge Voltage: 30V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 3.65 kg.
Charge: XLR-3-Pins
Discharge: Battery plate (Plus / Minus)
ENERpower Bike-Seat Tube Battery Li-ion Silverfish 36v from own production 17.25Ah (675Wh) with BAK BAK N18650CP
For motors up to 700 Watt
Important General Information
This 36V battery in the Silverfish case, which we manufacture, can be mounted beind the Seat of your bike (so-called Seat-Tube battery). The batteries are manufactured in cell holders made of plastic. Charging is made possible with an XLR-3-Pins socket, discharging via the down-plate of the battery. This case can hold up to 50 18650 battery cells. With a BMS that can withstand 20A-22A continuous load, this battery is suitable for motors with up to 1000 watts of power, working in 48V (13S) systems.
Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical Details
Li-ion cell: BAK BAK N18650CP
Voltage (nominal): 36V
Capacity: 17.25Ah
Power: 675Wh
Configuration: 10S5P
Internal resistance: < 75 mOhm
Charging voltage: 42V
End-of-Discharge Voltage: 30V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 3.65 kg.
Charge: XLR-3-Pins
Discharge: Battery plate (Plus / Minus)
ENERpower soft-pack battery 24V in format 7S2P | Capacity 10Ah | for Pedelecs, eBikes DIY | with LG Chem INR21700 50M.
Important General Information
The 24V batteries (25.2V - 25.9V) in softpack are manufactured in Berlin, and assembled in cell holders made of plastic. Charging is daone with a 3-pin charging plug (XLR-3), discharging via a discharge cable with XT-90 connector (male). A fuse of 30A in a waterproof holder limits the current drain.The BMS (Battery Management System) is always mounted on the longest side of the battery. At this point, the battery is about 10 to 15 mm thicker.The softpack batteries are assembled with FR4 insulation, which is made of flame retardant composite materials and consists of epoxy resin and glass fiber fabric. FR-4 is used i.a. as an electrically non-conductive substrate in electrical circuit boards.Highlights
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion cell: LG Chem INR21700 M50
Voltage (nominal): 24V (25.2V - 25.9V)
Capacity: 10Ah
Power: approx. 240 Wh
Configuration: 7S2P
Construction: 5 x 3
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-o-fdischarge voltage: 21V
Continuous discharge current: 20A = 480 watts
10 min. discharge current: 25A = 600 watts
5 seconds discharge current: 35A = approx. 850 watts
Weight: Approx. 1.2 kg.
Dimensions
Length: 125 mm Länge
Width: 75 mm
Height: 80 mm
Enerpower 24V (7S) Li-Ion battery 10Ah (250Wh) in soft pack in a BARAK bag for the luggage rack
Important general informationVery often, customers with a battery on the luggage carrier find that their battery is no longer offered in a case, or is very expensive. Owners of cargo bikes also often have problems with the conversion into electric bikes, bechause they have no space on the frame for a battery.
We designed this combination of a Li-Ion battery and a bag for the luggage rack as a solution to this challenge.The carrying bag can be flexibly attached to almost all luggage racks with Velcro fasteners.The distance from the opening in the bag (towards the motor) is quite short, saving a long cable. Thus, the electrification of the bike can be guaranteed both optically and professionally.Please note that the bag can be larger than the battery (we offer different versions). Only light materials (such as a rain jacket, for example) that do not damage the battery may be transported in the bag (no metal or sharp objects)
Technical Specifications of the bag
350 x 200 x 200 mm external dimensions
310 x 170 x 170 mm internal dimensions
10 liters
3 Velcro fasteners 40 mm wide for attachment to the luggage rack from below
2 Velcro fasteners for attachment to the luggage rack to the front (seat)
Outlet for the discharge cable with rubber coating to prevent moistureingress
waterproof cover to protect against rain
Shoulder strap detachable (included)
Reflective strips on 2 sides for safe driving.
Up to 5 kg weight
Own weight: 545 grams
Technical Specifications of the battery:
Li-ion cell: INR21700-M50T
Voltage (nominal): 24V (25.2V – 25.9V)
Capacity: 10Ah
Energy: approx. 24
Energy: approx. 250 Wh
Configuration: 7S2P
Construction: 5 x 3
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-of-discharge voltage: 21V
Continuous discharge current: 20A = 480 watts
10 min discharge current: 25A = 600 watts
5 seconds discharge current: 35A = about 850 watts
Weight: Approx. 1.2 kg.
Battery dimensions:
Length: 125mm
Width: 85mm
Height: 75mm
ENERpower Softpack battery 24V in format 7S5P | 360Wh | capacity 15Ah | for Pedelecs, eBikes DIY, Electric Boats, Maschines, Robotics | with Samsung 30T.
Important General Information
This 24V battery in softpack is in 7S format (25.2V-25.9V) and is manufactured with the battery cells of Samsung SDI, Murata (Sony) or Panasonic. The batteries are manufactured in cell holders made of plastic and equipped with a BMS 40A brand ENERpower. Charging is made with a spiral cable (20 - 100 cm extendable) with a XLR-3 (3 pins) connector. Discharging is realized via a discharge cable with XT90 connector (male). A counterpart XT90 is also included.
This range of small and powerful batteries we assemble with the impressive cell of Samsung SDI INR21700-30T. This battery cell hold a very stable voltage also at high discharge current and can operate 24V devices with up to 1200 Watt consumption.
Thus, this battery is also suitable for motors with 1200 watts of power.We manufacture the softpack batteries with FR4 insulation, flame retardant and flame retardant composites consisting of epoxy resin and glass fiber fabric. FR-4 is used inter alia as an electrically non-conductive substrate in electrical circuit boards.
Compatible with 24V motors
250 watts / 350 watts / 500 watts / 750 watts / 1000 / 1200 watts
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion battery cell: Samsung SDI INR21700-30T
Voltage (nominal): 24V (25.2V – 25.9V)
Capacity: 15Ah
Energy: approx. 360 Wh
Configuration: 7S5P
Format: 7 × 5
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-of-discharge voltage: 21V
Continuous discharge current: 50A = 1200 Watt
5 Sec. discharge current: 60A = ca. 1440 Watt
Charging: up to 8A
Discharging temperture: -20 to 80°C
Weight: approx. 2.75 kg.
Dimensions
Length: 160 mm Länge
Width: 115 mm – 135 mm
Height: 70 mm
ENERpower soft-pack battery 24V in format 7S3P | Capacity 15Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E
Important General Information
The 24V batteries (25.2V - 25.9V) in softpack are manufactured in Berlin, and assembled in cell holders made of plastic. Charging is daone with a 3-pin charging plug (XLR-3), discharging via a discharge cable with XT-90 connector (male). A fuse of 30A in a waterproof holder limits the current drain.The BMS (Battery Management System) is always mounted on the longest side of the battery. At this point, the battery is about 10 to 15 mm thicker.The softpack batteries are assembled with FR4 insulation, which is made of flame retardant composite materials and consists of epoxy resin and glass fiber fabric. FR-4 is used i.a. as an electrically non-conductive substrate in electrical circuit boards.
The INR18650-30Q can be discharged up to -20 Degrees, Charging at > 0 Degrees
Compatible with 24V motors
250 Watt / 350 Watt / 450 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion cell: Samsung SDI INR21700-50E
Voltage (nominal): 24V (25.2V - 25.9V)
Capacity: 15 Ah
Power: approx. 375 Wh
Configuration: 7S3P
Construction: 7 x 3
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-o-fdischarge voltage: 21V
Continuous discharge current: 20A = 480 watts
10 min. discharge current: 25A = 600 watts
5 seconds discharge current: 35A = approx. 850 watts
Weight: Approx. 1.55 kg.
Dimensions
Length: 140 mm Länge
Width: 100 mm – 115 mm
Height: 70 mm
Enerpower 24V (7S) Li-Ion battery 15Ah (375Wh) in soft pack in a BARAK bag for the luggage rack
Important general informationVery often, customers with a battery on the luggage carrier find that their battery is no longer offered in a case, or is very expensive. Owners of cargo bikes also often have problems with the conversion into electric bikes, bechause they have no space on the frame for a battery.
We designed this combination of a Li-Ion battery and a bag for the luggage rack as a solution to this challenge.The carrying bag can be flexibly attached to almost all luggage racks with Velcro fasteners.The distance from the opening in the bag (towards the motor) is quite short, saving a long cable. Thus, the electrification of the bike can be guaranteed both optically and professionally.Please note that the bag can be larger than the battery (we offer different versions). Only light materials (such as a rain jacket, for example) that do not damage the battery may be transported in the bag (no metal or sharp objects)
Technical Specifications of the bag
350 x 200 x 200 mm external dimensions
310 x 170 x 170 mm internal dimensions
10 liters
3 Velcro fasteners 40 mm wide for attachment to the luggage rack from below
2 Velcro fasteners for attachment to the luggage rack to the front (seat)
Outlet for the discharge cable with rubber coating to prevent moistureingress
waterproof cover to protect against rain
Shoulder strap detachable (included)
Reflective strips on 2 sides for safe driving.
Up to 5 kg weight
Own weight: 545 grams
Technical Specifications of the battery:
Li-ion cell: INR21700-M50T
Voltage (nominal): 24V (25.2V – 25.9V)
Capacity: 15Ah
Energy: approx. 375 Wh
Configuration: 7S3P
Construction: 7 x 3
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-of-discharge voltage: 21V
Continuous discharge current: 20A = 480 watts
10 min discharge current: 25A = 600 watts
5 seconds discharge current: 35A = about 850 watts
Weight: Approx. 1.7 kg.
Battery dimensions:
Length: 165 mm
Width: 85 mm
Height: 75mm
ENERpower Softpack battery 24V in format 7S6P | 440Wh | capacity 18Ah | for Pedelecs, eBikes DIY, Electric Boats, Maschines, Robotics | with Samsung 30T.
Important General Information
This 24V battery in softpack is in 7S format (25.2V-25.9V) and is manufactured with the battery cells of Samsung SDI, Murata (Sony) or Panasonic. The batteries are manufactured in cell holders made of plastic and equipped with a BMS 40A brand ENERpower. Charging is made with a spiral cable (20 - 100 cm extendable) with a XLR-3 (3 pins) connector. Discharging is realized via a discharge cable with XT90 connector (male). A counterpart XT90 is also included.
This range of small and powerful batteries we assemble with the impressive cell of Samsung SDI INR21700-30T. This battery cell hold a very stable voltage also at high discharge current and can operate 24V devices with up to 1200 Watt consumption.
Thus, this battery is also suitable for motors with 1200 watts of power.We manufacture the softpack batteries with FR4 insulation, flame retardant and flame retardant composites consisting of epoxy resin and glass fiber fabric. FR-4 is used inter alia as an electrically non-conductive substrate in electrical circuit boards.
Compatible with 24V motors
250 watts / 350 watts / 500 watts / 750 watts / 1000 / 1200 watts
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion battery cell: Samsung SDI INR21700-30T
Voltage (nominal): 24V (25.2V – 25.9V)
Capacity: 18Ah
Energy: approx. 440 Wh
Configuration: 7S6P
Format: 7 × 6
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-of-discharge voltage: 21V
Continuous discharge current: 50A = 1200 Watt
5 Sec. discharge current: 60A = ca. 1440 Watt
Charging: up to 8A
Discharging temperture: -20 to 80°C
Weight: approx. 3.35 kg.
Dimensions
Length: 160 mm Länge
Width: 138 mm – 160 mm
Height: 70 mm
ENERpower soft-pack battery 24V in format 7S4P | Capacity 20Ah | for Pedelecs, eBikes DIY | with INR21700 50E.
Important General Information
The 24V batteries (25.2V - 25.9V) in softpack are manufactured in Berlin, and assembled in cell holders made of plastic. Charging is daone with a 3-pin charging plug (XLR-3), discharging via a discharge cable with XT-90 connector (male). A fuse of 30A in a waterproof holder limits the current drain.The BMS (Battery Management System) is always mounted on the longest side of the battery. At this point, the battery is about 10 to 15 mm thicker.The softpack batteries are assembled with FR4 insulation, which is made of flame retardant composite materials and consists of epoxy resin and glass fiber fabric. FR-4 is used i.a. as an electrically non-conductive substrate in electrical circuit boards.Highlights
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion cell: LG Chem INR21700 M50
Voltage (nominal): 24V (25.2V - 25.9V)
Capacity: 20Ah
Power: approx. 480 Wh
Configuration: 7S7P
Construction: 7 x 4
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-o-fdischarge voltage: 21V
Continuous discharge current: 20A = 480 watts
10 min. discharge current: 25A = 600 watts
5 seconds discharge current: 35A = approx. 850 watts
Weight: Approx. 2.4 kg.
Dimensions
Length: 165 mm Länge
Width: 100 mm - 115 mm (Side of BMS)
Height: 74 mm
Enerpower 24V (7S) Li-Ion battery 20Ah (505Wh) in soft pack in a BARAK bag for the luggage rack
Important general informationVery often, customers with a battery on the luggage carrier find that their battery is no longer offered in a case, or is very expensive. Owners of cargo bikes also often have problems with the conversion into electric bikes, bechause they have no space on the frame for a battery.
We designed this combination of a Li-Ion battery and a bag for the luggage rack as a solution to this challenge.The carrying bag can be flexibly attached to almost all luggage racks with Velcro fasteners.The distance from the opening in the bag (towards the motor) is quite short, saving a long cable. Thus, the electrification of the bike can be guaranteed both optically and professionally.Please note that the bag can be larger than the battery (we offer different versions). Only light materials (such as a rain jacket, for example) that do not damage the battery may be transported in the bag (no metal or sharp objects)
Technical Specifications of the bag
350 x 200 x 200 mm external dimensions
310 x 170 x 170 mm internal dimensions
10 liters
3 Velcro fasteners 40 mm wide for attachment to the luggage rack from below
2 Velcro fasteners for attachment to the luggage rack to the front (seat)
Outlet for the discharge cable with rubber coating to prevent moistureingress
waterproof cover to protect against rain
Shoulder strap detachable (included)
Reflective strips on 2 sides for safe driving.
Up to 5 kg weight
Own weight: 545 grams
Technical Specifications of the battery:
Li-ion cell: INR21700-M50T
Voltage (nominal): 24V (25.2V – 25.9V)
Capacity: 20Ah
Energy: approx. 505 Wh
Configuration: 7S4P
Construction: 7 x 4
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-of-discharge voltage: 21V
Continuous discharge current: 20A = 480 watts
10 min discharge current: 25A = 600 watts
5 seconds discharge current: 35A = about 850 watts
Weight: Approx. 1.7 kg.
Battery dimensions:
Length: 165 mm
Width: 95-115 mm
Height: 75mm
ENERpower soft-pack battery 24V in format 7S5P | Capacity 25Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E
Important General Information
The 24V batteries (25.2V - 25.9V) in softpack are manufactured in Berlin, and assembled in cell holders made of plastic. Charging is daone with a 3-pin charging plug (XLR-3), discharging via a discharge cable with XT-90 connector (male). A fuse of 30A in a waterproof holder limits the current drain.The BMS (Battery Management System) is always mounted on the longest side of the battery. At this point, the battery is about 10 to 15 mm thicker.The softpack batteries are assembled with FR4 insulation, which is made of flame retardant composite materials and consists of epoxy resin and glass fiber fabric. FR-4 is used i.a. as an electrically non-conductive substrate in electrical circuit boards.
Compatible with 24V motors
250 Watt / 350 Watt / 450 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion cell: Samsung SDI INR21700-50E
Voltage (nominal): 24V (25.2V - 25.9V)
Capacity: 25 Ah
Power: approx. 600 Wh
Configuration: 7S5P
Construction: 7 x 5
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-o-fdischarge voltage: 21V
Continuous discharge current: 20A = 480 watts
10 min. discharge current: 25A = 600 watts
5 seconds discharge current: 35A = approx. 850 watts
Weight: Approx. 2.75 kg.
Dimensions
Length: around 160 mm
Width: around 115 mm – 135 mm
Height: around 74 mm
ENERpower soft-pack battery 24V in format 7S6P | Capacity 30Ah | for Pedelecs, eBikes DIY | withWith LG INR21700-50M.
Important General Information
The 24V batteries (25.2V - 25.9V) in softpack are manufactured in Berlin, and assembled in cell holders made of plastic. Charging is daone with a 3-pin charging plug (XLR-3), discharging via a discharge cable with XT-90 connector (male). A fuse of 30A in a waterproof holder limits the current drain.The BMS (Battery Management System) is always mounted on the longest side of the battery. At this point, the battery is about 10 to 15 mm thicker.The softpack batteries are assembled with FR4 insulation, which is made of flame retardant composite materials and consists of epoxy resin and glass fiber fabric. FR-4 is used i.a. as an electrically non-conductive substrate in electrical circuit boards.
Compatible with 24V motors
250 Watt / 350 Watt / 450 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion cell: LG INR21700-50M
Voltage (nominal): 24V (25.2V - 25.9V)
Capacity: 30 Ah
Power: approx. 720 Wh
Configuration: 7S6P
Construction: 7 x 6
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-o-fdischarge voltage: 21V
Continuous discharge current: 20A = 480 watts
10 min. discharge current: 25A = 600 watts
5 seconds discharge current: 35A = approx. 850 watts
Weight: Approx. 3.2 kg.
Dimensions
Length: 154 mm Länge
Width: 132 mm – 142 mm
Height: 70 mm
ENERpower soft-pack battery 24V in format 7S6P | Capacity 30Ah | for Pedelecs, eBikes DIY | withWith LG INR21700-50M.
Important General Information
The 24V batteries (25.2V - 25.9V) in softpack are manufactured in Berlin, and assembled in cell holders made of plastic. Charging is daone with a 3-pin charging plug (XLR-3), discharging via a discharge cable with XT-90 connector (male). A fuse of 30A in a waterproof holder limits the current drain.The BMS (Battery Management System) is always mounted on the longest side of the battery. At this point, the battery is about 10 to 15 mm thicker.The softpack batteries are assembled with FR4 insulation, which is made of flame retardant composite materials and consists of epoxy resin and glass fiber fabric. FR-4 is used i.a. as an electrically non-conductive substrate in electrical circuit boards.
Compatible with 24V motors
250 Watt / 350 Watt / 450 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion cell: LG INR21700-50M
Voltage (nominal): 24V (25.2V - 25.9V)
Capacity: 30 Ah
Power: approx. 720 Wh
Configuration: 7S6P
Construction: 7 x 6
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-o-fdischarge voltage: 21V
Continuous discharge current: 20A = 480 watts
10 min. discharge current: 25A = 600 watts
5 seconds discharge current: 35A = approx. 850 watts
Weight: Approx. 3.2 kg.
Dimensions
Length: 154 mm Länge
Width: 132 mm – 142 mm
Height: 70 mm
ENERpower Softpack battery 24V in format 7S7P | 840Wh | capacity 35Ah | for Pedelecs, eBikes DIY | with LG Chem 50M.
Important General Information
This 24V battery in softpack is in 7S format (25.2V-25.9V) and is manufactured with the battery cells of Samsung SDI, Murata (Sony) or Panasonic. The batteries are manufactured in cell holders made of plastic and equipped with a BMS 40A brand ENERpower. Charging is made with a spiral cable (20 - 100 cm extendable) with a XLR-3 (3 pins) connector. Discharging is realized via a discharge cable with XT90 connector (male). A counterpart XT90 is also included.
A fuse (fuse) of 60A in a waterproof holder limits the current drain and provides an additional safety measure.Thus, this battery is also suitable for motors with 1000 watts of power.We manufacture the softpack batteries with FR4 insulation, flame retardant and flame retardant composites consisting of epoxy resin and glass fiber fabric. FR-4 is used inter alia as an electrically non-conductive substrate in electrical circuit boards.In this battery we have also integrated a charge indicator. In 5 levels (empty / 25% / 50% / 75% / full) you can easily read the battery condition.
Compatible with 24V motors
250 watts / 350 watts / 500 watts / 750 watts / 1000 watts
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Samsung SDI INR18650-35E Li-Ion Cells –> 10A continuous load
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion battery cell:LG Chem INR21700 50M
Voltage (nominal): 24V (25.2V – 25.9V)
Capacity: 35 Ah
Energy: approx. 840 Wh
Configuration: 7S7P
Format: 7×7
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-of-discharge voltage: 21V
Continuous discharge current: 20A = 480 Watt
10 Min. discharge current: 40A = 1000 Watt
5 Sec. discharge current: 45A = ca. 1125Watt
Weight: approx. 3.65 kg.
Dimensions
Length: 154 mm Länge
Width: 154 mm – 165 mm
Height: 70 mm
ENERpower Softpack battery 24V in format 7S10P | 1260Wh | capacity 50Ah | for Pedelecs, eBikes DIY | with Samsung 50E.
Important General Information
This 24V battery in softpack is in 7S format (25.2V-25.9V) and is manufactured with the battery cells of Samsung SDI, Murata (Sony) or Panasonic. The batteries are manufactured in cell holders made of plastic and equipped with a BMS 40A brand ENERpower. Charging is made with a spiral cable (20 - 100 cm extendable) with a XLR-3 (3 pins) connector. Discharging is realized via a discharge cable with XT90 connector (male). A counterpart XT90 is also included.
A fuse (fuse) of 60A in a waterproof holder limits the current drain and provides an additional safety measure.Thus, this battery is also suitable for motors with 1000 watts of power.We manufacture the softpack batteries with FR4 insulation, flame retardant and flame retardant composites consisting of epoxy resin and glass fiber fabric. FR-4 is used inter alia as an electrically non-conductive substrate in electrical circuit boards.
Compatible with 24V motors
250 watts / 350 watts / 500 watts / 750 watts / 1000 watts
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion battery cell: Samsung SDI INR21700-50E
Voltage (nominal): 24V (25.2V – 25.9V)
Capacity: 50Ah
Energy: approx. 1260 Wh
Configuration: 7S10P
Format: 10 ×7
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-of-discharge voltage: 21V
Continuous discharge current: 40A = 1000 Watt
5 Sec. discharge current: 50A = ca. 1200 Watt
Weight: approx. 5.40 kg.
Dimensions
Length: 230 mm Länge
Width: 160 mm – 175 mm
Height: 70 mm
ENERpower Softpack battery 24V in format 7S10P | 1260Wh | capacity 50Ah | for Pedelecs, eBikes DIY, Wheel Chair | with Samsung 50E.
Important General Information
This 24V battery in softpack is in 7S format (25.2V-25.9V) and is manufactured with the battery cells of Samsung SDI, Murata (Sony) or Panasonic. The batteries are manufactured in cell holders made of plastic and equipped with a BMS 40A brand ENERpower. Charging is made with a spiral cable (20 - 100 cm extendable) with a XLR-3 (3 pins) connector. Discharging is realized via a discharge cable with XT90 connector (male). A counterpart XT90 is also included.
A fuse (fuse) of 60A in a waterproof holder limits the current drain and provides an additional safety measure.Thus, this battery is also suitable for motors with 1000 watts of power.We manufacture the softpack batteries with FR4 insulation, flame retardant and flame retardant composites consisting of epoxy resin and glass fiber fabric. FR-4 is used inter alia as an electrically non-conductive substrate in electrical circuit boards.
Compatible with 24V motors
250 watts / 350 watts / 500 watts / 750 watts / 1000 watts
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion battery cell: Samsung SDI INR21700-50E
Voltage (nominal): 24V (25.2V – 25.9V)
Capacity: 50Ah
Energy: approx. 1260 Wh
Configuration: 7S10P
Format: 10 ×7
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-of-discharge voltage: 21V
Continuous discharge current: 40A = 1000 Watt
5 Sec. discharge current: 50A = ca. 1200 Watt
Weight: approx. 5.40 kg.SB50 Connector
Dimensions
Length: 230 mm Länge
Width: 160 mm – 175 mm
Height: 70 mm
ENERpower Softpack battery 24V in format 7S10P | 1200Wh | capacity 50Ah | for Pedelecs, eBikes DIY | with Samsung 50E.
Important General Information
This 24V battery in softpack is in 7S format (25.2V-25.9V) and is manufactured with the battery cells of Samsung SDI, Murata (Sony) or Panasonic. The batteries are manufactured in cell holders made of plastic and equipped with a BMS 40A brand ENERpower. Charging is made with a spiral cable (20 - 100 cm extendable) with a XLR-3 (3 pins) connector. Discharging is realized via a discharge cable with XT90 connector (male). A counterpart XT90 is also included.
Thus, this battery is also suitable for motors with 1200 watts of power.We manufacture the softpack batteries with FR4 insulation, flame retardant and flame retardant composites consisting of epoxy resin and glass fiber fabric. FR-4 is used inter alia as an electrically non-conductive substrate in electrical circuit boards.
Compatible with 24V motors
250 watts / 350 watts / 500 watts / 750 watts / 1000 / 1200 watts
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion battery cell: Samsung SDI INR21700-50E
Voltage (nominal): 24V (25.2V – 25.9V)
Capacity: 50Ah
Energy: approx. 1200 Wh
Configuration: 7S10P
Format: 10 ×7
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-of-discharge voltage: 21V
Continuous discharge current: 50A = 1200 Watt
5 Sec. discharge current: 60A = ca. 1440 Watt
Weight: approx. 5.50 kg.
Dimensions
Length: 230 mm Länge
Width: 160 mm – 175 mm
Height: 70 mm
Variants from €735.00*
€740.00*
We Have a New Website!
or
This website uses cookies to ensure the best experience possible. More information...