A compact and powerful charger with 2 charging slots for Li-Ion, LiFePo4, Ni-Mh with 2A-3A output
Technical specifications:
Input: AC 110V - 265V / DC 12V 3A
Output: DC 5V 1A
Charging current (selectable):Slot 1: 0.25A - 2A
Slot 2: 0.25A - 3A
Attention: When both charging bays are occupied: up to 2A charging current
Dimensions:151 x 70 x 38 mm
Weight:
without power supply: 150 grams
With power supply: 375 grams
Compatible with:
Ni-Mh / Ni-Cd: 1.48V charging voltage
Li-Ion: 4.2V charging voltage
LiFePo4: 3.7V charging voltage
You can download the operating instructions here
ENERpower Li-Ion 6S charger (25.2V) for Li-ion batteries 21.6V-22.2V with DC plug | output 1A | 25W
General Information
With the right charger you extend the lifespan of your battery. Cheap chargers do not charge batteries to CC / CV and usually not up to 4.2V or 25.2V. At first, your battery will never be really full, and it will also shorten the life of the battery by up to 30%. Saving on a charger, is saving in the wrong place!
Highlights / Technical Details
Cable length: approx. 100 cm
Output: 1A
DC Plug: 5.5 mm / 2.1 mm (round plug)
Input: 100 - 240 V AC
Manufacturer: Fuyuang
Brand: ENERpower
Model: EP-FY2551000-DC
CC/CV with end-of-charge voltage of 25.2V +/- 0.2V
Suitable for 4S Li-ion battery packs (21.6V - 22.2V)
GS - tested safety according to § 21 ProdSG (corresponds with regard to the protection of the safety and health of persons)
Compatibility i.a.
This charger is compatible with all ENERpower batteries 6S (21.6V - 22.2V), which have a round plug (DC). You can also use this charger with other Li-Ion batteries that have a rated voltage of 21.6V or 22.2VV.
This ENERpower bracket for pocket and bike lamps is 360° rotateable, and fits all ENERpower Folomov flashlights
Please note that even if a flashlight can be seen in the picture, only the mount is included!
The ENERpower BT-C700 is an intelligent table-charger for four AA or AAA NIMH / NiCd rechargeable batteries, with LCD-Display and various functions.This charger has 4 independent charging slots, which allow it to charge simultaneously different batteries of different types and capacities. Five different operation modes are available: charge, discharge, refresh (optimizing old batteries), test (measures the actual capacity of the battery and neutralizes memory effect), Quick Test (measures the internal resistance of the battery). A backlit LCD display provides information with a key press: charging current, battery voltage, charged/discharged capacity, internal resistance and elapsed time of the charging/discharging process. The charging current can be selected from 200mA and up to 700mA for all four slots. The standard is 400mA.Charging current of 1000mA is available for slots 1 and 4, when there are no batteries in slots 2 and 3.Discharging current of 100, 200, 300, 400 and 500mA. Standard current is 300mA
The following NiMH and NiCD battery-types can be charged: AA (LR6 Mignon) AAA (LR3 Micro) batteries, NiMH-, NiCd.
Highlights Charging and discharging NiCd, NiMH Lithium Ion-Batteries Optimization and measuring the maximal capacity of the batteries. Each charging slot has its own display to inform about charging current, battery voltage and capacity, internal resistance and elapsed time. With 4 intelligent independent charging slots Charging current of 200mA - 700mA for all four slots; 1000mA is available for slots 1 and 4 (when there are no batteries in slots 2 and 3) Discharging current of 100, 200, 300, 400 and 500mA. Standard is 300mA Can charge simultaneously different batteries of different types, sizes, capacities. Trickle-discharge of NiMH/NiCd batteries. Temperature control, to protect the batteries and the device from overheating. TÜV approved power adapter 230V (12V charging cable is also available on demand)Technical Details Battery Voltage: 12V DC Input Voltag - Power Adapter: 100~240V 50/60Hz Output Voltage - Power Adapter: 12V DC, 1.0A TÜV approved Charging Currents: 200, 300, 400, 500, 700, 1000mA Discharging Currents: 100, 200, 300, 400, 500mA Max. Capacity: 20000mAh Operation Temperatures: 0-40°C Storage Temperatures: -40 bis +70°C Net weight with power adapter: 220 g Brutto weight with package: 310 g Dimensions L x W x H without power adapter: 130 x 83 x 35 mm
ENERpower charger 4S (14.4V) for LiFePO4 or Lead batteries 12V | Output current 10A | Crocodile connectors with IP67
Technical Specifications
Cable length: approx. 100 cm
Output: 10A - fast and powerful
Power: 150 watts
Connectors: Crocodiles (Black: Minus / Red: Plus)
Input: 100 - 240 V AC
Power plug: EU
CC / CV with end-of-charge voltage of 14.4V +/- 0.1V
Fits LiFePo4 12V batteries as well as 12V Lead batteries
GS - tested safety according to § 21 ProdSG (corresponds with regard to the protection of the safety and health of persons)
LED display
Green changes to red: battery connected
Red changes to green: charging finished
Safety
Overcurrent protection: < 11A
Short circuit protection
Reverse polarity protection
UL certification
Attention!
Be sure never to let the plus and minus contacts touch each other!!!
Note: The battery shown in the picture is not included in the package.
ENERpower charger 4S (14.4V) for LiFePO4 or Lead batteries 12V | Output current 20A | Crocodile connectors.
Technical Specifications
Cable length: approx. 100 cm
Output: 20A - fast and powerful
Power: 300 watts
Connectors: Crocodiles (Black: Minus / Red: Plus)
Input: 100 - 240 V AC
Power plug: selectable, EU or UK or US
CC / CV with end-of-charge voltage of 14.4V +/- 0.1V
Fits LiFePo4 12V batteries as well as 12V Lead batteries
GS - tested safety according to § 21 ProdSG (corresponds with regard to the protection of the safety and health of persons)
LED display
Green changes to red: battery connected
Red changes to green: charging finished
Safety
Overcurrent protection: < 21A
Short circuit protection
Reverse polarity protection
UL certification
Attention!
Be sure never to let the plus and minus contacts touch each other!!!
Note: The battery shown in the picture is not included in the package.
ENERpower charger 4S (14.4V) for LiFePO4 or Lead batteries 12V | Output current 2A | Crocodile connectors.
Technical Specifications
Cable length: approx. 100 cm
Output: 2A - fast and powerful
Power: 22.50 watts
Connectors: Crocodiles (Black: Minus / Red: Plus)
Input: 100 - 240 V AC
Power plug: selectable, EU or UK or US
CC / CV with end-of-charge voltage of 14.4V +/- 0.1V
Fits LiFePo4 12V batteries as well as 12V Lead batteries
GS - tested safety according to § 21 ProdSG (corresponds with regard to the protection of the safety and health of persons)
LED display
Green changes to red: battery connected
Red changes to green: charging finished
Safety
Overcurrent protection: < 2.3A
Short circuit protection
Reverse polarity protection
UL certification
Attention!
Be sure never to let the plus and minus contacts touch each other!!!
Note: The battery shown in the picture is not included in the package.
ENERpower charger 4S (14.4V) for LiFePO4 or Lead batteries 12V | Output current 30A | Crocodile connectors.
Technical Specifications
Cable length: approx. 100 cm
Output: 30A - fast and powerful
Power: 500 watts
Connectors: Crocodiles (Black: Minus / Red: Plus)
Input: 100 - 240 V AC
Power plug: selectable, EU or UK or US
CC / CV with end-of-charge voltage of 14.4V +/- 0.1V
Fits LiFePo4 12V batteries as well as 12V Lead batteries
GS - tested safety according to § 21 ProdSG (corresponds with regard to the protection of the safety and health of persons)
Download full technical specifications (PDF)
LED display
Green changes to red: battery connected
Red changes to green: charging finished
Safety
Overcurrent protection: < 31A
Short circuit protection
Reverse polarity protection
UL certification
Attention!
Be sure never to let the plus and minus contacts touch each other!!!
Note: The battery shown in the picture is not included in the package.
ENERpower charger 4S (14.4V) for LiFePO4 or Lead batteries 12V | Output current 6A | Crocodile connectors.
Technical Specifications
Cable length: approx. 100 cm
Output: 6A - fast and powerful
Power: 80 watts
Connectors: XLR-3
Input: 100 - 240 V AC
Power plug: selectable, EU or UK or US
CC / CV with end-of-charge voltage of 14.4V +/- 0.1V
Fits LiFePo4 12V batteries as well as 12V Lead batteries
GS - tested safety according to § 21 ProdSG (corresponds with regard to the protection of the safety and health of persons)
LED display
Green changes to red: battery connected
Red changes to green: charging finished
Safety
Overcurrent protection: < 6.3A
Short circuit protection
Reverse polarity protection
UL certification
Attention!
Be sure never to let the plus and minus contacts touch each other!!!
Note: The battery shown in the picture is not included in the package.
ENERpower charger 8S (28.8V) for LiFePO4 or Lead batteries 24V | Output current 2A | Crocodile connectors.
Technical Specifications
Cable length: approx. 100 cm
Output: 2A - fast and powerful
Power: 60 watts
Connectors: Crocodiles (Black: Minus / Red: Plus)
Input: 100 - 240 V AC
Power plug: selectable, EU or UK or US
CC / CV with end-of-charge voltage of 14.4V +/- 0.1V
Fits LiFePo4 24V batteries
GS - tested safety according to § 21 ProdSG (corresponds with regard to the protection of the safety and health of persons)
LED display
Green changes to red: battery connected
Red changes to green: charging finished
Safety
Overcurrent protection: < 2.3A
Short circuit protection
Reverse polarity protection
UL certification
Attention!
Be sure never to let the plus and minus contacts touch each other!!!
Note: The battery shown in the picture is not included in the package.
ENERpower charger 8S (28.8V) for LiFePO4 or Lead batteries 24V | Output current 2A | Crocodile connectors.
Technical Specifications
Cable length: approx. 100 cm
Output: 2A - fast and powerful
Power: 60 watts
Connectors: Crocodiles (Black: Minus / Red: Plus)
Input: 100 - 240 V AC
Power plug: selectable, EU or UK or US
CC / CV with end-of-charge voltage of 14.4V +/- 0.1V
Fits LiFePo4 24V batteries
GS - tested safety according to § 21 ProdSG (corresponds with regard to the protection of the safety and health of persons)
LED display
Green changes to red: battery connected
Red changes to green: charging finished
Safety
Overcurrent protection: < 2.3A
Short circuit protection
Reverse polarity protection
UL certification
Attention!
Be sure never to let the plus and minus contacts touch each other!!!
Note: The battery shown in the picture is not included in the package.
ENERpower charger 8S (28.8V) for LiFePO4 or Lead batteries 24V | Output current 3A | Crocodile connectors.
Technical Specifications
Cable length: approx. 100 cm
Output: 3A - fast and powerful
Power: 90 watts
Connectors: DC Round plug 5.5 x 2.1 mm
Input: 100 - 240 V AC
Power plug: selectable, EU or UK or US
CC / CV with end-of-charge voltage of 14.4V +/- 0.1V
Fits LiFePo4 24V batteries
GS - tested safety according to § 21 ProdSG (corresponds with regard to the protection of the safety and health of persons)
LED display
Green changes to red: battery connected
Red changes to green: charging finished
Safety
Overcurrent protection: < 3.3A
Short circuit protection
Reverse polarity protection
UL certification
Attention!
Be sure never to let the plus and minus contacts touch each other!!!
Note: The battery shown in the picture is not included in the package.
ENERpower charger 2S (7.2V) for LiFePO4 or Lead batteries 6V | Output current 1A | Crocodile connector.
Technical Specifications
Cable length: approx. 100 cm
Output: 1A
Power: 7.5 watts
Connectors: Crocodiles (Black: Minus / Red: Plus)
Input: 100 - 240 V AC
CC / CV with end-of-charge voltage of 7.2V +/- 0.1V
Fits LiFePo4 6V batteries as well as 6V lead batteries
GS - tested safety according to § 21 ProdSG (corresponds with regard to the protection of the safety and health of persons)
LED display
Green changes to red: battery connected
Red changes to green: charging finished
Safety
Overcurrent protection: <1.3A
Short circuit protection
Reverse polarity protection
GS certification
Attention!
Be sure never to let the plus and minus contacts touch each other!!!
Enerpower Condor - The Tiny Monster
The ENERpower Condor, with its CREE XM-L2 U2 (1000 lumens), is one of the most powerful lamps in its tiny dimension in terms of its light weight.
With only 64 grams, the ENERpower Condor can be comfortably used as a head lamp (helmet lamp).
With an impressive range of accessories, the lamp can be used as both a head lamp and a helmet lamp. A holder for bicycles is also included, but the lamp is not Road compliant and use is only permitted off-road.
The CREE XM-L2 UL is both powerful and economical. With maximum consumption of 1.8A (around 6.5 watts), this version is even 20% more economical compared to the predecessor CREE.
The Switching between the operating levels is via the illuminated button. If the battery level is too low, the lamp regulates the level (mode) down automatically.
Certified according to IPX4, the Condor is water-splash-proof and can be used in the outdoor without any problem.
The design of the lamp housing directs the heat generated by the LED head lightly on the surface and prevents a negative impact on the light output.
The ENERpower Condor is powered by a 3.6V Li-Ion rechargeable battery (see our compatible batteries below)
This lamp comes in 2 versions:
1. GoPro version with mounts for helmet and bike
2. Headlamp version with a headband
Technical Details:
LED
CREE XM-L2 U2
Lumen
Up to 1000
Body-Material
Aluminum alloy
Dimensions
45 x 45 x 26 mm
Weight
64 g.
Cable length
Ca. 75 cm
Operation Modes
5: 100% / 70% / 40% / 10% & blink-mode (strobe)
Water Resistance
IPX-4
Operating Voltage
2.5V-4.2V
Working Current
< 1.8A
Battery indicator
Green: fully Power
Blue: around 50% remains
Red: almost empty, or too hot surface
Enerpower Condor - The Tiny Monster
The ENERpower Condor, with its CREE XM-L2 U2 (1000 lumens), is one of the most powerful lamps in its tiny dimension in terms of its light weight.
With only 64 grams, the ENERpower Condor can be comfortably used as a head lamp (helmet lamp).
With an impressive range of accessories, the lamp can be used as both a head lamp and a helmet lamp. A holder for bicycles is also included, but the lamp is not Road compliant and use is only permitted off-road.
The CREE XM-L2 UL is both powerful and economical. With maximum consumption of 1.8A (around 6.5 watts), this version is even 20% more economical compared to the predecessor CREE.
The Switching between the operating levels is via the illuminated button. If the battery level is too low, the lamp regulates the level (mode) down automatically.
Certified according to IPX4, the Condor is water-splash-proof and can be used in the outdoor without any problem.
The design of the lamp housing directs the heat generated by the LED head lightly on the surface and prevents a negative impact on the light output.
The ENERpower Condor is powered by a 3.6V Li-Ion rechargeable battery (see our compatible batteries below)
This lamp comes in 2 versions:
1. GoPro version with mounts for helmet and bike
2. Headlamp version with a headband
Technical Details:
LED
CREE XM-L2 U2
Lumen
Up to 1000
Body-Material
Aluminum alloy
Dimensions
45 x 45 x 26 mm
Weight
64 g.
Cable length
Ca. 75 cm
Operation Modes
5: 100% / 70% / 40% / 10% & blink-mode (strobe)
Water Resistance
IPX-4
Operating Voltage
2.5V-4.2V
Working Current
< 1.8A
Battery indicator
Green: fully Power
Blue: around 50% remains
Red: almost empty, or too hot surface
Enerpower Eagle - The Light-Monster
The ENERpower Eagle, with its 2 CREE XM-L2 U2 throws an enormous light of 2000 lumens and can be used as a headlamp, or helmet lamp
The CREE XML U2 is both powerful and economical. With maximum consumption of 2.5A (18 watts), this version is even 20% more economical compared to the predecessor CREE.
The attachment with a rubber ring can be done easily onto the helmet. With its light weight and minimal size, the ENERpower Eagle is a true light monster!
With an impressive range of accessories, the lamp can be used as both a head lamp and a helmet lamp. A holder for bicycles is also included, but the lamp is not Road compliant and use is only permitted off-road.
The well-covered electronics of the ENERpower Eagle regulate the luminosity as a function of the temperature in 4 operating modes:
Turbo: 100%
High: 70%
Medium: 40%
Low: 10%
In separate mode (own button), the lamp can go into blinking-mode (strobe). This feature is
more of a benefit to photographers or hunters.
The ENERpower Eagle is robust with an aluminum alloy housing and water resistant to IXP-4 (protection against splashes of water on all sides).
This lamp comes in 2 versions:
1. GoPro version with mounts for helmet and bike
2. Headlamp version with a headband
LED
CREE XM-L2 U2
Lumen
Up to 2000
Body-Material
Aluminum Alloy
Dimensions
49 x 48.6 x 24 mm
Weight
100 g.
Cable length
Around 75 cm
Operation Modes
5 : 100% / 70% / 40% / 10% & blink (Strobe)
Operating Voltage
5V-8.4V
Operating Current
2.2A-2.5A
Water Resistance
IPX-4
Battery indicator
Green: 70% - 100%
Blue: 40%-70%
Red: 10%-40%
Flashing Red: < 10%
Enerpower Eagle - The Light-Monster
The ENERpower Eagle, with its 2 CREE XM-L2 U2 throws an enormous light of 2000 lumens and can be used as a headlamp, or helmet lamp
The CREE XML U2 is both powerful and economical. With maximum consumption of 2.5A (18 watts), this version is even 20% more economical compared to the predecessor CREE.
The attachment with a rubber ring can be done easily onto the helmet. With its light weight and minimal size, the ENERpower Eagle is a true light monster!
With an impressive range of accessories, the lamp can be used as both a head lamp and a helmet lamp. A holder for bicycles is also included, but the lamp is not Road compliant and use is only permitted off-road.
The well-covered electronics of the ENERpower Eagle regulate the luminosity as a function of the temperature in 4 operating modes:
Turbo: 100%
High: 70%
Medium: 40%
Low: 10%
In separate mode (own button), the lamp can go into blinking-mode (strobe). This feature is
more of a benefit to photographers or hunters.
The ENERpower Eagle is robust with an aluminum alloy housing and water resistant to IXP-4 (protection against splashes of water on all sides).
This lamp comes in 2 versions:
1. GoPro version with mounts for helmet and bike
2. Headlamp version with a headband
LED
CREE XM-L2 U2
Lumen
Up to 2000
Body-Material
Aluminum Alloy
Dimensions
49 x 48.6 x 24 mm
Weight
100 g.
Cable length
Around 75 cm
Operation Modes
5 : 100% / 70% / 40% / 10% & blink (Strobe)
Operating Voltage
5V-8.4V
Operating Current
2.2A-2.5A
Water Resistance
IPX-4
Battery indicator
Green: 70% - 100%
Blue: 40%-70%
Red: 10%-40%
Flashing Red: < 10%
This power supplier charges 5V end-devices using a USB connection. Compatible with all devices which use USB connection for charging, including Apple products (iPhone, iPad etc.)
Technical Details
Input Voltage: 100-240V 50/60 Hz
Input Current: max. 0.35A
Universal power connection with USB-output
Output charging voltage: 5V DC (+5%)
Output charging current: max. 2A / protection by < 2.3A
Manufacturer-ID: KA1517-0502000EUU
Colors: Black
Modell: ENERpower EP-5W-B (Black)
Standards
IEC 60950-1: 2005 (Second Edition) + A1: 2009
EN 55022: 2010 + AC: 2011
EN 61000-3-2: 2006 + A1: 2009 + A2:2009
EN 61000-3-3: 2008
EN 55024: 2010
This power adapter functions as a power supplier or charger for end-devices, using a standard USB-port, which supports QC3.0 and QC2.0 (fast charge by Qualcomm 3.0 and 2.0
Technical Details
Input Voltage: 100-240 Volt 50/60 Hz
Input Current: max. 0.5A
Universal power connection with USB-output
Output charging voltage: 3.6V - 6.5V / 6.5V - 9V / 9V-12V
Output charging current: 3A / 2A / 1.5A
Manufacturer-ID: KA1803-EU
Color: Black
Model: ENERpower EP-18WQC3B
Standards
EN60950-1
EN55022
EN55024
Enerpower 45W Power Adapter for DELL XPS 9550 / DELL XPS 15 / DELL XPS 113 / Latitude 11 5175 / Latitude 11 5179 / Dell Latitude 12 7275 / Dell XPS 12 9250 / Dell Latitude 13 7370 45W with USB-C QC2.0 / QC3 connector. 0 / PD - GS certifiedGeneralThe Type C USB port is best known for its charging speed, as it can provide more power. This connection, which is becoming the market standard, is more compact than the old USB plug, and can be plugged in on both sides. Because of its high performance, it can be used with many more devices - from cell phones, digital cameras and tablets to laptops, monitors and even some printers.
Compatible with following devices (and more...):
Acer Switch 5, Acer Switch Alpha 12,
Apple iPad Pro 10.5 Zoll, Apple iPad Pro 12.9 Zoll,
Apple MacBook 12 Zoll 13 Zoll 2015/2016,
Apple MacBook Pro 12 Zoll (2015/2016),
Apple MacBook Pro 13 Zoll (2015/2016),
Asus Chrome Book C302,
Asus Zenbook 3 UX39UA, UX330UA
Dell Latitude 11 5175, 5179,
Dell Latitude 12 7275,
Dell Latitude 13 7370,
Dell XPS12 9250,
Dell XPS13 (2016),
Google Nexus 5X,
Google Nexus 6P,
Google Pixel 2 C1501W,
Google Pixel C Tablet, Google Pixel XL,
HP Elitebook x360 13.3 Zoll,
HP Pavilion x2,
HP Spectre 13,
HP Spectre x360,
HP X2 10,
HTC Bolt,
Lenovo ThinkPad P51s,
Lenovo ThinkPad T470, T470s,
Lenovo ThinkPad T570,
Lenovo ThinkPad X1 Carbon (2017),
Lenovo ThinkPad X270,
Lenovo ThinkPad Yoga 370,
Lenovo ThinkPad Yoga S,
LeTV One Max, LeTV One Pro LG G5,
LG G5, LG Gram 15 (2016),
Microsoft Lumia 950, 950XL,
Nintendo Switch(2017),
Nokia N1 Tablet,
Nubia Z11 Mini S,
OnePlus 2 Chromebook,
Samsung Chromebook Pro,
Samsung Galaxy S7,
Sony Xperia XZ, Z5
Technical specifications:
Cable length: approx. 120 cmPlug: USB Type CDownload to: QC2.0 / QC3.0 / PDInput voltage: 100-240 V AC, 50-60 HzOutput voltage: 20V / 2.25A, 15V / 3A, 9V / 3A, 5V / 3AOutput power: 45WManufacturer: FlyPowerBrand: ENERpowerModel: EP-45WGS tested
This power supplier charges 5V end-devices using a USB connection. Compatible with all devices which use USB connection for charging, including Apple products (iPhone, iPad etc.)
Technical Details
Input Voltage: 100-240V 50/60 Hz
Input Current: max. 0.25A
Universal power connection with USB-output
Output charging voltage: 5V DC (+5%)
Output charging current: max. 1A / protection by < 1.6A
Manufacturer-ID: FLYPOWER PS08B050K1000EU
Colors: White / Black
Modell: ENERpower EP-5W-W (White) / ENERpower EP-5W-B (Black)
Standards
IEC 60950-1: 2005 (Second Edition) + A1: 2009
EN 55022: 2010 + AC: 2011
EN 61000-3-2: 2006 + A1: 2009 + A2:2009
EN 61000-3-3: 2008
EN 55024: 2010
ENERpower EP-L12 Universal Dual 5V Power Supply USB Charger (2.4A / 1A)
With this high quality USB power supply you can charge 2 devices at the same time. Whether it is smartphones, cell phones, GPS, tablets or game consoles, the EP-L12 is robust, powerful and provides constant output voltage, which is essential for a healthy charging process in your device for longevity. Key features Input voltage: AC110 ~ 220V Output: 5V 3.4A max. USB output current (max.): Port 1 - 1000mA; Port 2 - 2400mA Output power: Port 1 - 5W; Port 2 - 12W Can charge two devices at the same time via two USB ports Dimensions: 87X50X28 mm Weight: 115 g Made of fireproof material Short circuit protection FCC approved (electromagnetic compatibility) Color: Black compatibility Compatible with 90% of the 5V devices on the market (smartphones, tablets, etc.) Compatible with game consoles scope of delivery1 x Enerpower EP-L12 black in blister packaging
€7.99*
€9.99*
We Have a New Website!
or
This website uses cookies to ensure the best experience possible. More information...