ENERpower battery LiFePO4 36V (12S) for the operation of 36V devices, motors etc. Important general informationWe assemble this series of LiFePo4 batteries in the 12S (36V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with a BMS of 20A - for devices with a consumption of up to 720 wattsThe protection against overcharging (43,2V) and against deep discharge (24V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights High-quality production in Germany BMS with an integrated passive balancer BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of original capacity after 1800 full charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95/EG (RoHS) Technical specifications  Voltage (nominal): 36V (12S) Capacity: 16Ah Configuration: 12S4P Energy: about 610Wh Maximum charging current: 8A Internal resistance: < 70mOhm Charging voltage: 43.2V End-of-discharge voltage: 24V Weight: approx. 4 kg. Charging: XLR-3 Discharge: XT-60 / XT-90 / Anderson PowerPole Dimensions: ca. 330 x 120 x 70 mm

 ENERpower battery LiFePO4 36V (12S) for the operation of 36V devices, motors etc. Important general informationWe assemble this series of LiFePo4 batteries in the 12S (36V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with a BMS of 20A - for devices with a consumption of up to 720 wattsThe protection against overcharging (43,2V) and against deep discharge (24V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights High-quality production in Germany BMS with an integrated passive balancer BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of original capacity after 1800 full charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95/EG (RoHS) Technical specifications  Voltage (nominal): 36V (12S) Capacity: 20Ah Configuration: 12S5P Energy: about 720Wh Maximum charging current: 8A Internal resistance: < 70mOhm Charging voltage: 43.2V End-of-discharge voltage: 24V Weight: approx. 5.4 kg. Charging: XLR-3 Discharge: XT-60 / XT-90 / Anderson PowerPole Dimensions: ca. 330 x 160 x 70 mm

 ENERpower battery LiFePO4 36V (12S) for the operation of 36V devices, motors etc. Important general informationWe assemble this series of LiFePo4 batteries in the 12S (36V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with a BMS of 20A - for devices with a consumption of up to 720 wattsThe protection against overcharging (43,2V) and against deep discharge (24V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights High-quality production in Germany BMS with an integrated passive balancer BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of original capacity after 1800 full charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95/EG (RoHS) Technical specifications  Voltage (nominal): 36V (12S 38.4V) Capacity: 24Ah Configuration: 12S6P Energy: about 920Wh Maximum charging current: 8A Internal resistance: < 70mOhm Charging voltage: 43.2V End-of-discharge voltage: 24V Weight: approx. 6.5 kg. Charging: XLR-3 Discharge: XT-60 / XT-90 / Anderson PowerPole Dimensions: ca. 330 x 170 x 70 mm

 ENERpower battery LiFePO4 36V (12S) for the operation of 36V devices, motors etc. Important general informationWe assemble this series of LiFePo4 batteries in the 12S (36V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with a BMS of 20A - for devices with a consumption of up to 720 wattsThe protection against overcharging (43,2V) and against deep discharge (24V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights High-quality production in Germany BMS with an integrated passive balancer BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of original capacity after 1800 full charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95/EG (RoHS) Technical specifications  Voltage (nominal): 36V (12S 38.4V) Capacity: 24Ah Configuration: 12S6P Energy: about 920Wh Maximum charging current: 8A Internal resistance: < 70mOhm Charging voltage: 43.2V End-of-discharge voltage: 24V Weight: approx. 6.5 kg. Charging: XLR-3 Discharge: XT-60 / XT-90 / Anderson PowerPole Dimensions: ca. 330 x 170 x 70 mm