ENERpower soft pack battery 36V | Format 10S14P | Energy 2520Wh | Capacity 70Ah | for for industrial machines, pedelecs, eBikes, electric rickshaws, electric cargo bikes, electric boats DIY | with Samsung SDI INR21700-50E | For motors with power up to 2160 wattsGeneralWe manufacture this 36V powerful Li-Ion battery with Samsung SDI battery cells of the type INR21700-50E. The enormous capacity of 70Ah results in a total amount of energy of 2.5 kWhWith a Smart BMS (60A) this battery can operate the 36V motors from MINN KOTTA such as Minn Kota Terrova 112 BT & Minn Kota Riptide.The battery is manufactured with Anderson Powerpole 75 for the discharge side and with XT-90 as the charging socket.This battery is delivered in an IP67 protective case made of plastic and you can choose, if you wish to have the battery with, or without a chargerBMS (Battery Management System)This series of batteries is manufactured with a Smart BMS with 60A continuous load (for 36V motors up to 2160 watts). A Smart BMS is digitally programmed and controlled in comparison to an analog BMS. Monitoring of voltage (overcharge and deep discharge), current (overdischarge) and temperature are more accurate. The passive balancer is also easier to control.scope of applicationWe have developed this series of batteries for light electric vehicles such as electric rickshaw, electric cargo bikes, electric boats, machines in the industrial sector etc.Compatible with 36V motors250 watts / 500 watts / 750 watts / 1200 watts / 1500 watts / 1800 watts / 2160 wattsHighlights High quality production - Made in Germany Manufacturing just-in-time Smart BMS with an integrated passive balancer Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 500 charging cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR21700-50E Voltage (nominal): 36V (37V) Capacity: 70Ah Energy: approx. 2520 Wh Configuration: 10S14P Charging voltage: 42V Final discharge voltage: 30V Charging current (max.): 20A Continuous discharge current: 60A = 2160 watts Weight: approx. 12 kg. Dimensions: 285 x 120 x 390 mm Shop: Weipu Discharge connector: Anderson RS

ENERpower Softpack battery 36V in format 10S3P RECTANGULAR | 435Wh | capacity 12 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-40T Important General Information The 36V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain. In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (construction 8×4), 10S4P (construction 8×5), 10S5P (construction 8×7) and 10S6P (construction 8×8). In the rectangular version, 10 cells are used on the longest side (200 mm). We assemble this type of battery in the formats 10S2P (construction 10×2), 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6). The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker. A smart BMS is digitally controlled and therefore more accurate. The BMS reads more powerfully and also supports recuperation. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery Compatible with 36V motors 250 watts / 500 watts / 750 watts / 950 Watt / 1080 Watt / 1440 Watts Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion Cell: Samsung SDI INR21700-40T Voltage (nominal): 36V (37V) Capacity: 12 Ah Power: approx. 435 Wh Configuration: 10S3P (set up: 10x3 - rectangular) Internal resistance: < 75 mOhm Charge voltage: 42V End-of-discharge voltage: 30V Charge Max.: 8A Continuous discharge Current: 30A = 1080 Watt or 40A = 1440 watts 5 seconds discharge current: 50A = 1800 watts Weight: approx. 2.5 Kg. Charge connector (connects to the charger): XLR-3 (3 pins) Discharge connector (connects to the motor): XT-90 Dimensions Length: 230 mm Width: 70mm – 90 mm Height: 74 mm

ENERpower Softpack battery 36V in format 10S5P RECTANGULAR | 740Wh | capacity 20Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-40T Important General Information The 36V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain. In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (construction 8×4), 10S4P (construction 8×5), 10S5P (construction 8×7) and 10S6P (construction 8×8). In the rectangular version, 10 cells are used on the longest side (200 mm). We assemble this type of battery in the formats 10S2P (construction 10×2), 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6). The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery Compatible with 36V motors 250 watts / 500 watts / 750 watts / 950 Watt / 1080 Watt / 1440 Watts Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion Cell: Samsung SDI INR21700-40T Voltage (nominal): 36V (37V) Capacity: 20 Ah Power: approx. 740 Wh Configuration: 10S5P (set up: 10x5- rectangular) Internal resistance: < 75 mOhm Charge voltage: 42V End-of-discharge voltage: 30V Charge Max.: 8A Continuous discharge Current: 40A = 1440 watts 5 seconds discharge current: 50A = 1800 watts Weight: approx. 3.7 Kg. Charge connector (connects to the charger): XLR-3 (3 pins) Discharge connector (connects to the motor): XT-90 Dimensions Length: 230 mm Width: 115mm – 140 mm Height: 74 mm

ENERpower Softpack battery 36V in format 10S7P RECTANGULAR | 1440 Wh | capacity 40 Ah | for Pedelecs, eBikes DIY | with  INR21700-M50T Important General Information The 36V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain. In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (construction 8×4), 10S4P (construction 8×5), 10S5P (construction 8×7) and 10S6P (construction 8×8). In the rectangular version, 10 cells are used on the longest side (200 mm). We assemble this type of battery in the formats 10S2P (construction 10×2), 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6). The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery Compatible with 36V motors 250 watts / 500 watts / 750 watts / 950 Watt / 1080 Watt / 1440 Watts Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion Cell: LG Chem INR21700-M50T Voltage (nominal): 36V (37V) Capacity: 40 Ah Power: approx. 1440 Wh Configuration: 10S8P (set up: 10x8 - rectangular) Internal resistance: < 75 mOhm Charge voltage: 42V End-of-discharge voltage: 30V Charge Max.: 8A Continuous discharge Current: 40A = 1440 watts 5 seconds discharge current: 50A = 1800 watts Weight: approx. 5.8 Kg. Charge connector (connects to the charger): XLR-3 (3 pins) Discharge connector (connects to the motor): XT-90 Dimensions Length: 220 mm Width: 176 mm – 186 mm Height: 70 mm

ENERpower Softpack battery 36V in format 10S9P RECTANGULAR | 1620 Wh | capacity 45 Ah | for Pedelecs, eBikes DIY | with INR21700-M50T Important General Information The 36V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain. In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (construction 8×4), 10S4P (construction 8×5), 10S5P (construction 8×7) and 10S6P (construction 8×8). In the rectangular version, 10 cells are used on the longest side (200 mm). We assemble this type of battery in the formats 10S2P (construction 10×2), 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6). The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery Compatible with 36V motors 250 watts / 500 watts / 750 watts / 950 Watt / 1080 Watt / 1440 Watts Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion Cell: LG Chem INR21700-M50T Voltage (nominal): 36V (37V) Capacity: 45 Ah Power: approx. 1620 Wh Configuration: 10S9P (set up: 10x9 - rectangular) Internal resistance: < 75 mOhm Charge voltage: 42V End-of-discharge voltage: 30V Charge Max.: 8A Continuous discharge Current: 40A = 1440 watts 5 seconds discharge current: 50A = 1800 watts Weight: approx. 6.8 Kg. Charge connector (connects to the charger): XLR-3 (3 pins) Discharge connector (connects to the motor): XT-90 / XT-60 / Anderson Dimensions Length: ca. 235 mm Width: ca. 198 mm – 220 mm Height: ca. 74 mm

ENERpower Softpack battery 36V in format 10S10P RECTANGULAR | 1800 Wh | capacity 50 Ah | for Pedelecs, eBikes DIY | with INR21700-M50T Important General Information The 36V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain. In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (construction 8×4), 10S4P (construction 8×5), 10S5P (construction 8×7) and 10S6P (construction 8×8). In the rectangular version, 10 cells are used on the longest side (200 mm). We assemble this type of battery in the formats 10S2P (construction 10×2), 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6). The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery Compatible with 36V motors 250 watts / 500 watts / 750 watts / 950 Watt / 1080 Watt / 1440 Watts / 1800 Watts Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion Cell: LG Chem INR21700-M50T Voltage (nominal): 36V (37V) Capacity: 50 Ah Power: approx. 1800 Wh Configuration: 10S10P (set up: 10x10 - rectangular) Internal resistance: < 75 mOhm Charge voltage: 42V End-of-discharge voltage: 30V Charge Max.: 8A Continuous discharge Current: 50A = 1800 watts 5 seconds discharge current: 80A = 2880 watts Weight: approx. 7.3 Kg. Charge connector (connects to the charger): XLR-3 (3 pins) Discharge connector (connects to the motor): XT-90 / XT-60 / Anderson SB50 Dimensions Length: ca. 235 mm Width: ca. 235mm – 255 mm Height: ca. 74 mm