- eBike Batteries
- Motor Kits
-
Batteries
- Batteries 1S (3.6V-3.7V)
- Batteries 2S (7.2V-7.4V)
- 3S Batteries (10.8V-11.1V)
- Batteries 4S (14.4V-14.8V)
- Li-Ion Battery 5S (18V - 18.5V)
- Li-Ion Akkus 6S (21,6V-22,2V)
- Batteries for electrical devices
- eBoat Batteries
- Industry
- Ni-Mh Batteries
- starter battery 12V LiFePo4
- LiFePO4 Battery Packs
- Li-ion Batteries for LED-Flashlights
- Li-Ion / LiFePO4 cells
- Chargers / Power Suppliers
- LED Flashlights
- energy Storage
- BMS / PCM
- Accessories & Components
Filter
–
BUNDLE
Enerpower 2S2P Li-Ion 7.2V-7.4V with open ended cables
€39.99*
Prod. no.:
115030008
This Li-ion 2S2P battery with open ended cables has 7.2V-7.4V and is assembled with a protection circuit. This battery can be used universally, such as a spare battery for FUTABA transmitter.We assemble this battery in 3 variations:
With INR18650-35E (6800 mAh)
With Murata US18650V3 (4300 mAh)
With INR21700-50E (10000 mAh)
Technical specifications Min Capacity: 6800 mAh (35E) / 4300 mAh (V3) / 10000 mAh (INR21700-50E) Nominal voltage: 7.2V - 7.4V Charging voltage: 8.4V Final discharge voltage: 6V Weight: approx. 220 g. (35E / V3) / approx. 300 g. (INR21700-50E) Length / width / height: see in the picture Protection circuit: PCB 5A Maximum power: 35 watts Cable: open end about 15 cm Compatibility and others Applications with 7.2V-7.4V to 5A continuous load (35W) Transmitter batteries 7.2V Ni-Mh, or Li-Ion (connector must be soldered by the buyer)
Enerpower RC 2S1P Li-Ion 7.2V-7.4V 3,45Ah Open-End cables / JST-XH18
€17.50*
Prod. no.:
11170
This Li-ion 2S1P would be assembled without a protection circuit. An external JST-XH active Balancer connector has been implemented.
Technical specifications Min Capacity: 3450 mAh Nominal voltage: 7.2V - 7.4V Charging voltage: 8.4V Final discharge voltage: 5V (deep discharged below) Weight: approx. 120 g. Length / width / height: 67 / 37 / 19 mm Protection circuit: No Maximum power: 90 watts (do not exceed)
Active Balancer: JST XH-18 Cable: open end about 7 cm
Compatibility and others Applications with 7.2V-7.4V to 5A continuous load (35W) Transmitter batteries 7.2V Ni-Mh, or Li-Ion (connector must be soldered by the buyer)