Shop

ENERpower Softpack 36V 10S5P 17.25Ah with BMS Pedelec Battery (10×5) DIY

245.00 Inc. 19% Vat.

Rectangular ENERpower softpack battery 36V 17.25Ah for Pedelecs and eBikes DIY.
Powered by LG Chem INR18650-MJ1

Description

Important general information

The 36V batteries in softpack, which we assembled, have 2 formats – square and rectangular. The batteries are assembled with cells-holders made of plastic.

Charging is enabled with a DC round plug (5.5 mm / 2.5 mm); discharging is enabled with a discharge cable with XT90 connector. A safety fuse of 30A in a water resistant holder limits the current rate.

In the square version, 8 cells are used as the longest side (160 mm). We assemble this type of battery in formats 10S3P (8×4), 10S4P (8×5), 10S5P (8×7) and 10S6P (8×8).

In the rectangular version, 10 cells are used as the longest side (200 mm). We assemble this type of battery in formats 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6).

The BMS (Battery Management System) is always mounted on the longest side of the battery. At this point the battery is approx. 10 – 15 mm thicker.

The softpack batteries are manufactured with FR4 isolation, inflammable and flame-retardant composites consisting of epoxy resin and fiberglass cloth. FR-4 is used, inter alia, as an electrically non-conductive carrier material for electrical printed circuit boards.

Highlights

  • High quality assembling – Made in Germany
  • Assembling Just-In-Time
  • BMS with an integrated balancer
  • BMS with protection against overcharge, deep discharge, over discharge (temperature control)
  • LG Chem INR18650-MJ1 li-ion battery cells –> 50A continuous load
  • Direct from the manufacturer
  • Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
  • No memory-effect – charge the battery whenever you want
  • Weight: approx. 2.5 Kg
  • Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)

Technical Details

  • Li-ion battery cell: LG Chem INR18650-MJ1
  • Voltage (nominal): 36V (37V)
  • Capacity: 17.25Ah
  • Energy: approx. 625Wh
  • Configuration: 10S5P
  • Format: 10×5
  • Internal resistance: < 75 mOhm
  • Charging voltage: 42V
  • End-of-discharge voltage: 30V
  • Continuous discharge current: 20A = 720 Watt
  • 10 Min. discharge current: 25A = 900 Watt
  • 5 Sec. discharge current: 35A = 1260 Watt
  • Constant load per cell: approx. 3.7A or 7A in peak load.

Dimensions

  • 200 mm length
  • 100 mm – 115 mm width
  • 70 mm height
Additional information
Weight 3.2 kg
Dimensions 38.5 x 11.0 x 7.5 cm
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “ENERpower Softpack 36V 10S5P 17.25Ah with BMS Pedelec Battery (10×5) DIY”

Your email address will not be published. Required fields are marked *